New I/O error

[hugaby]

M ImgBurn has been working wonderfully. All the sudden today about 3-4 bars into the compeleted It stops. The time left switches to Unknown and I have error Intrepretatiion check condion, Im new, I apologize if Im vague.

Thanks

[rscottdrysdale]

read the pink box ^^^ up there...

[hugaby]

Is that answer supposed to help me?

[Cynthia]

Hi and welcome to the forum, hugaby!

 

You have any "old" log from a similar burn that you can post? It would gives us a little hint about your setup.

 

Old logs: Main Menu -> Help -> ImgBurn Logs

 

Even if you restart the computer you get this problem?

[hugaby]

I3:17:52 ImgBurn Version 2.4.4.0 started!

I 13:17:52 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 13:17:52 Total Physical Memory: 457,900 KB - Available: 225,780 KB

I 13:17:52 Initialising SPTI...

I 13:17:52 Searching for SCSI / ATAPI devices...

I 13:18:21 Found 1 DVD

[Cynthia]

I 13:18:31 Destination Device: [3:0:0] ASUS DRW-1814BL 1.10 (D:) (ATA)

There is a later firmware (a program that instructs the burner how to burn). You now have ver 1.10 and here is a ver 1.14. This version might like your discs better.

 

http://www.firmwarehq.com/Asus/DRW-1814BL/files.html

 

When you run the update:

 

No disc in the burner

All other programs closed

Restart the computer after the update

 

I3:17:52 ImgBurn Version 2.4.4.0 started!

There is also a ver 2.5.0.0 to install.

 

http://www.imgburn.com/index.php?act=download

[hugaby]

Ok updatedboth and now I have this

 

I 20:30:22 Link Size: Auto

I 20:30:22 Lock Volume: Yes

I 20:30:22 Test Mode: No

I 20:30:22 OPC: No

I 20:30:22 BURN-Proof: Enabled

I 20:30:22 Filling Buffer... (20 MB)

I 20:30:23 Writing LeadIn...

W 20:30:50 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error

W 20:30:50 Retrying (1 of 20)...

I 20:30:51 Writing LeadIn...

I 20:31:09 Writing Session 1 of 1... (1 Track, LBA: 0 - 1873911)

I 20:31:09 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1873911)

[Cynthia]

If it has worked before with this brand of media (media code) and now suddenly doesn't - it might be that the burner is broken and needs to be replaced.

 

You could try with another brand of media or clean the laser head with a lens cleaning disc.

[hugaby]

I had to keep hitting enter to keep it going, it finished and said imcomplete

[hugaby]

I had to keep hitting enter to keep it going, it finished and said imcomplete;. It did not copy the info on the disc. Do you think thr DVD Burner is out?

[Cynthia]

The symptoms indicate that. A cleaning disc might help - burners like to attract dust.

[hugaby]

Did that too wtih a cleaning disc. Do you think my burner is gone?

[Cynthia]

The last option is to try with another brand of media - if that also fails - replace it.

[hugaby]

BOO.... Hoo...

I had just burned a disc this am and have been all month no problem. Its going to the PUTER DR. tomorrow for a new

burner. Thanks to all for your help and support,,,,

 

Computer has went in today. Still not burning and repair said burner is fine. Heres todays log

 

I 22:30:57 ImgBurn Version 2.5.0.0 started!

I 22:30:57 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 22:30:57 Total Physical Memory: 457,900 KB - Available: 75,360 KB

I 22:30:57 Initialising SPTI...

I 22:30:57 Searching for SCSI / ATAPI devices...

I 22:30:57 Found 1 DVD

Edited August 6, 2009 by hugaby