waynea3 Posted August 7, 2009 Share Posted August 7, 2009 Hi, Wayne again. Sorry to have not provided the log file in regards to my "75% fail into burn" problem. I have attached a pdf copy for your review. Kind Regards, Wayne ImgBurn___Logfile.pdf Link to comment Share on other sites More sharing options...
spinningwheel Posted August 7, 2009 Share Posted August 7, 2009 Wayne, your error is a simple I/O reported by your drive and then by ImgBurn to you. I/O errors are caused by your firmware/drive/media not playing well together...so...to start with: 1) Check for a firmware update. 2) Get rid of your CMC discs and get some Taiyo Yuden or Verbatim (made in Singapore) 3) Run a cleaning disc on your drive. 4) Do not double post. Link to comment Share on other sites More sharing options...
mmalves Posted August 7, 2009 Share Posted August 7, 2009 Also try burning at 8x or 12x for a possibly better burn Link to comment Share on other sites More sharing options...
waynea3 Posted August 7, 2009 Author Share Posted August 7, 2009 Hi, Wayne again. Sorry to have not provided the log file in regards to my "75% fail into burn" problem. I have attached a pdf copy for your review. Kind Regards, Wayne Thank you for your help: it was the firmware at fault. All is well now. I should have noted that this fault had occurred when burning my own photos and files also. Sorry for the inconvenience and thanks again. Wayne Link to comment Share on other sites More sharing options...
Recommended Posts