ImAnOgre Posted August 7, 2009 Share Posted August 7, 2009 (edited) Hi, I'm having problems with Imgburn burning DVDs. The burn goes through to completion, and verifies. I can see the files or watch the movie on ANY Vista box.... but if I try to view the files on an XP box, or play the movie on a DVD player -- I see nothing. The XP boxes do not see the disk as blank, just a formatted disk with no data. I'm using ImgBurn 2.5 System Specs. AMD Phenom 9850 8 gigs Ram Asus mATX780g Motherboard Samsung S223Q The DVDs Im using to put files on are all sorts of different brands, I can burn succesfully with my XP box and view on any box. TIA for any help. I'm writing this from work, I'll post a log later if it'll help. Edited August 7, 2009 by ImAnOgre Link to comment Share on other sites More sharing options...
spinningwheel Posted August 7, 2009 Share Posted August 7, 2009 Hi and welcome I can see the files or watch the movie on ANY Vista box I assume you have tried this on many many machines then? The DVDs Im using to put files on are all sorts of different brands, Although I understand the reason for the statement, if you have spent some time reading here, or on other forums, you will have realized that that is a huge problem when trying to troubleshoot. if I try to view the files on an XP box, or play the movie on a DVD player -- I see nothing The machine that you make the disc with should always be able to read it. A lot of problems are uncovered when trying to use other means of reading the same disc. Lets start with a log of the complete, verified burn and work on up from there. Link to comment Share on other sites More sharing options...
ImAnOgre Posted August 8, 2009 Author Share Posted August 8, 2009 (edited) I've used 2 other vista boxes to view the disk on, both a laptop and a desktop and they work fine. Since I knew I was making a coaster, here's the file using a cheap Staples DVD+R I 11:37:52 ImgBurn Version 2.5.0.0 started! I 11:37:52 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6002 : Service Pack 2) I 11:37:52 Total Physical Memory: 8,386,740 KB - Available: 6,322,600 KB W 11:37:52 SPTD can have a detrimental effect on drive performance. I 11:37:52 Initialising SPTI... I 11:37:52 Searching for SCSI / ATAPI devices... I 11:37:53 Found 1 DVD Edited August 8, 2009 by ImAnOgre Link to comment Share on other sites More sharing options...
yescool2002 Posted August 10, 2009 Share Posted August 10, 2009 Hello, I am having a similar issue. I bought some BENQ DVD+R discs. I burned them and they play fine on my standalone player. However if I put them back in the DVDRW Lite On Drive I used to burn them, autoplay shows them as blanks and asks me if I want to launch a program to burn them. If I try to read it with IMGBURN, I get this LITE-ON DVDRW LH-20A1H LL0D (ATA) Current Profile: DVD+RW Disc Information: Status: Complete Erasable: Yes Formatted: Yes Sessions: 1 Sectors: 2.295.104 Size: 4.700.372.992 bytes Time: 510:03:29 (MM:SS:FF) TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 2295103) -> LeadOut (LBA: 2295104) Track Information: Session 1... -> Track 01 (LTSA: 0, TS: 2295104, LRA: 0) Physical Format Information (ADIP): Disc ID: DAXON-AZ3-00 Book Type: DVD+RW Part Version: 2 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 2.491.711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: DAXON-AZ3-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 2.455.567 Last Physical Sector in Layer 0: 0 but it's obvious something is not working because it says it will create the image as c:\image.iso instead of the disc label I used when burning. If I click on the icon to start the ripping I get "L-EC errors" If I try to read it using Decrypter, I get a UDF FILE SYSTEM PARSING FAILED. Is it a problem with this specific media? I dont have any other brands but I can buy some other for testing. However as I said, the movie plays fine on my standalone DVD player. Thanks for your help. Link to comment Share on other sites More sharing options...
yescool2002 Posted August 10, 2009 Share Posted August 10, 2009 Reinstalled my good old NEC 4550 DVDRW drive and now I'm able to see the contents of the disc on that very same XP computer...weird. Link to comment Share on other sites More sharing options...
mmalves Posted August 10, 2009 Share Posted August 10, 2009 Disc ID: DAXON-AZ3-00 I'd say the problem is the media you're using. You could try a lens cleaning disc on your Lite On burner to see if it helps, but it would be best if you could use high quality media, such as Verbatim and Taiyo Yuden. Link to comment Share on other sites More sharing options...
yescool2002 Posted August 10, 2009 Share Posted August 10, 2009 Thanks. Yes I usually use Verbatim and TY, but I bought these DVD+Rs as thy were the only available this week. I will do a backup to better media. Thanks again Link to comment Share on other sites More sharing options...
Recommended Posts