johnnydanger Posted August 8, 2009 Share Posted August 8, 2009 Hi everyone. Ive used Imgburn for 10 dual layer discs out of a 15 pack. All the sudden last 3 have been coasters. The DVD im trying to burn gets to 51% then I get stops and I get an error. Im using Memorex DVD+R DL discs. I know these are not the most high quality discs, but I have not had a problem with them in the past. I would get some Verbatim DVDs if I could, but no one ever has them in stock locally. Anyways, heres the log that it posts. The error says: "I/O Error! Device: [3:1:0] TSSTcorp DVD+-RW TS-H653B D400 (E:) (Fibre) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 1D 36 00 00 00 20 00 Interpretation: Write (10) - Sectors: 1914368 - 1914399 Sense Area: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 00 00 Interpretation: Write Error" The log is as follows: I 21:33:08 ImgBurn Version 2.5.0.0 started! I 21:33:08 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 21:33:08 Total Physical Memory: 2,619,144 KB - Available: 1,247,388 KB I 21:33:08 Initialising SPTI... I 21:33:08 Searching for SCSI / ATAPI devices... I 21:33:09 Found 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted August 8, 2009 Share Posted August 8, 2009 I 21:33:20 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x) It writes at 4x because that's the slowest speed supported by your burner/firmware/media combination. You could try at 6x or 8x but I doubt it'll work. You'd have much better results with Verbatim 2.4x blanks. Or, if you still want to use those blanks, you should look for a new burner that can handle them Link to comment Share on other sites More sharing options...
johnnydanger Posted August 8, 2009 Author Share Posted August 8, 2009 Thanks for the info. What I dont understand is that Ive burned about 10 discs from the same pack with the same burner and firmware with no problems to date. Ranging from backups, to home made movies, all dual layer and none have had any problems. I just cant figure out why all the sudden it stopped working. Im going to try to find somewhere that have Verbatims. The only downside is that the only place locally that I can find them is selling them in 20 packs, and Verbatims are not exactly cheap. Im hoping to find someone I know who has some and can just let me have one to check. I will try and report back if I need more help. Link to comment Share on other sites More sharing options...
Cynthia Posted August 8, 2009 Share Posted August 8, 2009 The old suggestion. If it had worked before - try a cleaning disc in your burner. Link to comment Share on other sites More sharing options...
johnnydanger Posted August 9, 2009 Author Share Posted August 9, 2009 I hadnt thought of that. I will try. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts