swervingsolid Posted August 8, 2009 Share Posted August 8, 2009 Hey guys I'm back yet again, a month ago i was here and had an I/O error and the solution was to get a new dvd burner, I found one and i hooked it up and the first 2 burns on it worked then it just started to give me I/O errors Error: Device: [0:1:0] Sony DVD RW DRU-800A KY (D:) (ATA) ScsiStatus: 0x02 Interpretation: Check condition CDB: 28 00 00 1D 33 A0 00 00 01 00 Interpretation: Read (10) - Sector: 1913760 Sense Area: 70 00 03 00 00 00 00 0A 00 00 00 00 11 05 00 00 00 00 Interpretation: L-EC Uncorrectable Error Log: I 23:08:28 ImgBurn Version 2.5.0.0 started! I 23:08:28 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 23:08:28 Total Physical Memory: 1,570,892 KB - Available: 591,016 KB I 23:08:28 Initialising SPTI... I 23:08:28 Searching for SCSI / ATAPI devices... I 23:08:28 Found 1 DVD-ROM and 1 DVD Link to comment Share on other sites More sharing options...
Cynthia Posted August 8, 2009 Share Posted August 8, 2009 Curious. the solution was to get a new dvd burner This burner was released 2005. Hope you didn't pay a fortune for it. There is a later firmware for that burner. http://www.firmwarehq.com/Sony/DRU-800A/files.html Basic issue with the log - the burner do not like the brand of media. Link to comment Share on other sites More sharing options...
swervingsolid Posted August 8, 2009 Author Share Posted August 8, 2009 I know its a tad bit old, I paid like $10 for it from a friend, I'll be sure to get that firmware and better DVD's thanks Cynthia Link to comment Share on other sites More sharing options...
Cynthia Posted August 8, 2009 Share Posted August 8, 2009 A cleaning disc for the laser head might also be worth a try. Link to comment Share on other sites More sharing options...
swervingsolid Posted August 8, 2009 Author Share Posted August 8, 2009 Ok I'll try that out. Link to comment Share on other sites More sharing options...
Recommended Posts