reidneile Posted August 9, 2009 Posted August 9, 2009 I was wondering if I am encountering a problem after upgrading to 2.5.0 After I used Imgburn using version 2.5, once the build process is completed (I check the close program in the options settings, I need to cycle my dvd writer for Windows XP explorer to recognize the disc. Using Version 2.4.4 this did not happen. I think this also happens when I burn a image file using the write option Any advice? Thanks (I am I going nuts) Reinstalled V 2.4.4 this morning and disc is recognized as before. (I know that the options were reset after the reinstall) ============================= I 10:53:57 ImgBurn Version 2.4.4.0 started! I 10:53:57 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 10:53:57 Total Physical Memory: 2,087,980 KB - Available: 1,349,648 KB W 10:53:57 Drive C:\ (FAT32) does not support single files > 4 GB in size. I 10:53:57 Initialising SPTI... I 10:53:57 Searching for SCSI / ATAPI devices... I 10:53:57 Found 1 CD-RW, 1 DVD-ROM and 1 DVD
mmalves Posted August 9, 2009 Posted August 9, 2009 Please install 2.5.0.0 and tell it not to keep your current settings (it'll use the default ones). Does it still do that? You haven't disabled AutoRun, have you? By the way, there's newer firmware for your burner (remove any disc and close the tray before updating then reboot after it's finished).
reidneile Posted August 9, 2009 Author Posted August 9, 2009 (edited) Please install 2.5.0.0 and tell it not to keep your current settings (it'll use the default ones). Does it still do that? You haven't disabled AutoRun, have you? By the way, there's newer firmware for your burner (remove any disc and close the tray before updating then reboot after it's finished). Thanks for suggestions. I will reinstall 2.5.0 and do not keep current settings. ---------- I 16:56:13 ImgBurn Version 2.5.0.0 started! I 16:56:13 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 16:56:13 Total Physical Memory: 2,087,980 KB - Available: 1,489,252 KB W 16:56:13 Drive C:\ (FAT32) does not support single files > 4 GB in size. I 16:56:13 Initialising SPTI... I 16:56:13 Searching for SCSI / ATAPI devices... I 16:56:13 Found 1 CD-RW, 1 DVD-ROM and 1 DVD Edited August 9, 2009 by reidneile
Recommended Posts