WT03 Posted August 13, 2009 Posted August 13, 2009 i've been trying desperetly for the past 2 weeks to burn an ISO img file to dvd-r disc. on windows Vista. Imgburn 2.5 always says the burn is successfull with no errors in the log, but when I try & read the disc, it's blank. 0 free space. I've tried the disc on different machines, and rebooted windows. Can't read the disc. I am using good quality verbatim discs, burning at 4.x speed. already went through about 10 of these expensive little hummers... I'm doing a new fresh burn now so you have an updated log... The device is a HL-DT-ST DVDRAM GSA T20N. I've checked the driver update, but windows says I already have the latest version. I've checked the firmware vrs through imgburn and there is an update.. imgburn says I have version WT03, there is a version WY04 for my LG-GSA-T20N. I downloaded the file, but when I run the exe, it can't find the target drive. I've tried our other 3 computers, but none of them support recording on DVD-R discs. --- Log File ---- I 06:49:32 Operation Started! I 06:49:32 Source File: C:\Users\Family\Downloads\Monopoly_USA_WII-VORTEX\vortex-mnp.iso I 06:49:32 Source File Sectors: 2,294,912 (MODE1/2048) I 06:49:32 Source File Size: 4,699,979,776 bytes I 06:49:32 Source File Volume Identifier: Monopoly I 06:49:32 Source File File System(s): Special I 06:49:32 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-T20N WT03 (E:) (ATA) I 06:49:32 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 4x, 8x) I 06:49:32 Destination Media Sectors: 2,297,888 I 06:49:32 Write Mode: DVD I 06:49:32 Write Type: DAO I 06:49:32 Write Speed: 4x I 06:49:32 Link Size: Auto I 06:49:32 Lock Volume: Yes I 06:49:32 Test Mode: No I 06:49:32 OPC: No I 06:49:32 BURN-Proof: Enabled I 06:49:32 Filling Buffer... (40 MB) I 06:49:33 Writing LeadIn... I 06:50:21 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911) I 06:50:21 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911) I 07:04:47 Synchronising Cache... I 07:04:57 Exporting Graph Data... I 07:04:57 Graph Data File: C:\Users\Family\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T20N_WT03_AUGUST-13-09_6-49_AM_MCC_03RG20_4x.ibg I 07:04:57 Export Successfully Completed! I 07:04:57 Operation Successfully Completed! - Duration: 00:15:24 I 07:04:57 Average Write Rate: 5,306 KB/s (3.8x) - Maximum Write Rate: 5,625 KB/s (4.1x) I 07:04:57 Cycling Tray before Verify... W 07:05:05 Waiting for device to become ready... I 07:05:19 Device Ready! I 07:05:21 Operation Started! I 07:05:22 Source Device: [1:0:0] HL-DT-ST DVDRAM GSA-T20N WT03 (E:) (ATA) I 07:05:22 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20) (Speeds: 4x, 8x) I 07:05:22 Image File: C:\Users\Family\Downloads\Monopoly_USA_WII-VORTEX\vortex-mnp.iso I 07:05:22 Image File Sectors: 2,294,912 (MODE1/2048) I 07:05:22 Image File Size: 4,699,979,776 bytes I 07:05:22 Image File Volume Identifier: Monopoly I 07:05:22 Image File File System(s): Special I 07:05:22 Read Speed (Data/Audio): MAX / MAX I 07:05:22 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2294911) I 07:05:22 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911) I 07:15:06 Exporting Graph Data... I 07:15:06 Graph Data File: C:\Users\Family\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T20N_WT03_AUGUST-13-09_6-49_AM_MCC_03RG20_4x.ibg I 07:15:06 Export Successfully Completed! I 07:15:06 Operation Successfully Completed! - Duration: 00:09:44 I 07:15:06 Average Verify Rate: 7,859 KB/s (5.7x) - Maximum Verify Rate: 11,391 KB/s (8.2x) ----end ---- Now, the log didn't say anything that it closed the disc... So I do it manually: Close Track Close Session - I/O ERROR Device: [1:0:0] HL-DT-ST-DVDRAM GSA T20N WT03 (E:) (ATA) SCSI Status 0x02 Interpretation: Check Condition CDB: 5B 00 02 00 00 00 00 00 00 00 Interpretation: Close Track / Session Sense Area: 70 00 05 00 00 00 00 0A 5B 00 00 0C 72 03 00 00 00 00 Interpretation: Session Fixation Error - Incomplete track in session Close Disc - Same errors as above except for the Sense Area Sense Area: 70 00 05 00 00 00 00 0A 5B 05 00 0C 24 00 00 C0 00 02 Interpretation: Invalid Field in CDB So that's it, can't read the disc... Any help is appreciated, but please, just real help... I have already tried all the basic stuff I know of, as you can see. Thank you.
LIGHTNING UK! Posted August 13, 2009 Posted August 13, 2009 It burnt and verified fine so there is no problem with the disc. Your PC's won't be able to view the contents, it's a WII disc after all!
WT03 Posted August 13, 2009 Author Posted August 13, 2009 that's right, it is.. I'm trying to do backup of one of our games.... But it doesn't even work in the wii machine...
mmalves Posted August 13, 2009 Posted August 13, 2009 I'm sorry but we can't help if it isn't an ImgBurn issue
WT03 Posted August 13, 2009 Author Posted August 13, 2009 Thanks, actually you did help me quite a bit, and it's greatly appreciated. Everyone was telling me I'd be able to read the disc after it's been burnt.. As I always say, need the right answer, go to the simplest source. After all this time & discs, I finally got the disc burn working... Thanks again!
Recommended Posts