JP101 Posted August 16, 2009 Share Posted August 16, 2009 My problem is that my DVD is writing very very slow, nothing I've read seems to correct it. I've updated my drivers, my firmware, and the version of Imgburn. All settings for DMA and IDE channels and whatnot seem ok. Buffer goes to 100% like in someone else's post, says "writing LeadIn...", the "write rate" maxes out at 6Kb/s, which would take an hour to write one minute of video. Is it absolutely necessary to use Verbatim DVD+-R or is that not my problem? I'm a newbie to Imgburn so humor me, please~:^{ Imgburn Log: I 21:53:55 ImgBurn Version 2.5.0.0 started! I 21:53:55 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 21:53:55 Total Physical Memory: 392,624 KB - Available: 99,444 KB W 21:53:55 Drive C:\ (FAT32) does not support single files > 4 GB in size. W 21:53:55 Drive E:\ (FAT32) does not support single files > 4 GB in size. I 21:53:55 Initialising SPTI... I 21:53:55 Searching for SCSI / ATAPI devices... I 21:53:55 Found 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted August 16, 2009 Share Posted August 16, 2009 I 21:56:26 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 2.4x, 4x)I 21:56:26 Write Speed: 4x W 21:57:21 Failed to Write Sectors 32 - 63 - Reason: Power Calibration Area Error E 21:57:57 Failed to Write Sectors 64 - 95 - Reason: Power Calibration Area Error Your burner doesn't like that media. If you don't want to get Verbatim or Taiyo Yuden blanks then at least try other brands until you find one that works with your burner. Link to comment Share on other sites More sharing options...
Recommended Posts