Henri Posted August 25, 2009 Share Posted August 25, 2009 Okay let me first start by giving you some backround info. I am using a Sony Optiarc DVD RW 7200 and Memorex DVD DL. I know ppl have suggested that I should get the verbatims dvds and I will unless someone can give me some advice. I am burning 360 games and have perviously burnt about 20+ games and all was well with a few errors. Something I thought was normal. I had vista installed first when I burnt all games. Then downgraded to xp and imageburn would not allow me to go less the 4x. I thought it was an xp issue and went back to vista. I am on vista and still get the same issue. Here is my log and any help will be welcome. If its my drive can anyone please let me know which drive I should get. Thanks. Note: Once the dics gives me this error. I pop out the dvd and I can see multiple rings on the disc. I have never seen this b4 which makes me lean to the fact that the rom is bad. Thanks. I/O Error! Device [1:0:0] Optiarc DVD RW AD-7200S 1.09 (D:) (ATA) ScsiStatus:0x02 Interpretation: Check Condition CDB: 28 00 00 07 21 F0 00 00 01 00 Interpretation: Read (10) - Sector: 467440 Sense Area: F0 00 03 00 07 21 F0 0A 00 00 00 00 11 00 00 00 00 00 Interpretation: Unrecovered Read Error I 20:03:51 ImgBurn Version 2.5.0.0 started! I 20:03:51 Microsoft Windows Vista Home Basic Edition (6.0, Build 6001 : Service Pack 1) I 20:03:51 Total Physical Memory: 2,085,328 KB - Available: 1,386,920 KB I 20:03:51 Initialising SPTI... I 20:03:51 Searching for SCSI / ATAPI devices... I 20:03:52 Found 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted August 25, 2009 Share Posted August 25, 2009 I 20:04:40 Destination Device: [1:0:0] Optiarc DVD RW AD-7200S 1.09 (D:) (ATA)I 20:04:40 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 4x, 6x, 8x) There's newer firmware for your burner (remove any disc and close the tray before updating then reboot after it's finished). Try burning at 6x or 8x to see if you get a better burn. That burner is very good and if you bought Verbatim 2.4x blanks it should work without problems. Link to comment Share on other sites More sharing options...
kimbodo17 Posted August 28, 2009 Share Posted August 28, 2009 hey i have burnt like 16 wii games that are iso files but lately i have been getting the I/O error i have a laptop with a dvd burner in it and i use verbatim dvd-r and still get the error on img burn, it dose the fisrt burn perfect but when it verifies i get the error it been on like 5 different games and its been just the past few days so i rebooted the computer to new and still get the issue could it be a bad download but 5 games and i get them from espalwii which i neer had a problem before this is my message I/O ERROR scsistatus:0x02 interpretation:check condition CDB:28 00 00 1b f1 b1 00 01 00 interpretation:read(10)-sector1831345 sense area:70 00 03 00 00 00 00 0a 00 00 00 00 11 05 00 00 00 00 intrepretation:L-Ec uncorrectable ERROR help me plssssssssssssssssss i tried it even on nero and still no go help me plzzzzzzzzzzzzzzzzzzzzzzzzzzzzz Link to comment Share on other sites More sharing options...
Cynthia Posted August 29, 2009 Share Posted August 29, 2009 @ Henri 4x also gave me a crappy burn = verify errors with that RITEK-S04-66 media code. 6x and 8x works very nicely. The best result was made at 6x write speed. Link to comment Share on other sites More sharing options...
rouge Posted August 30, 2009 Share Posted August 30, 2009 I am also getting an i/o error. I did on an old version of ImgBurn so I've updated to the newest version, and still am getting the i/o error. Funny thing is, I never got errors prior to today using whatever cd media I had at the time. I ran in it test mode first, then tried to burn the iso: I 11:25:29 ImgBurn Version 2.4.2.0 started! I 11:25:29 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 11:25:29 Total Physical Memory: 916,464 KB - Available: 478,120 KB I 11:25:29 Initialising SPTI... I 11:25:29 Searching for SCSI / ATAPI devices... I 11:25:30 Found 1 DVD-ROM and 1 DVD-ROM/CD-RW! I 11:26:58 Operation Started! I 11:26:58 Source File: C:\DOWNLOADS\xpsp3_5512.080413-2113_fi_x86fre_spcd.iso I 11:26:58 Source File Sectors: 189,255 (MODE1/2048) I 11:26:58 Source File Size: 387,594,240 bytes I 11:26:58 Source File Volume Identifier: GRTMUPD_FI I 11:26:58 Source File Application Identifier: CDIMAGE 2.52 (03/09/2004 TM) I 11:26:58 Source File File System(s): ISO9660 I 11:26:58 Destination Device: [1:0:0] TEAC DW-224E-A A.2E (K:) (ATA) I 11:26:58 Destination Media Type: CD-R (Disc ID: 97m26s66f) I 11:26:58 Destination Media Sectors: 359,847 I 11:26:58 Write Mode: CD I 11:26:58 Write Type: SAO I 11:26:58 Write Speed: 2x I 11:26:58 Test Mode: Yes I 11:26:58 OPC: No I 11:26:58 BURN-Proof: Enabled I 11:26:59 Filling Buffer... (20 MB) I 11:27:05 Writing LeadIn... I 11:27:49 Writing Session 1 of 1... (1 Track, LBA: 0 - 189254) I 11:27:49 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 189254) I 11:38:16 Synchronising Cache... I 11:38:44 Cycling Tray after Test Write... I 11:38:46 Exporting Graph Data... I 11:38:46 Graph Data File: C:\Documents and Settings\Mum\Application Data\ImgBurn\Graph Data Files\TEAC_DW-224E-A_A.2E_SUNDAY-AUGUST-30-2009_11-26_AM_97m26s66f_2x.ibg I 11:38:46 Export Successfully Completed! I 11:38:46 Operation Successfully Completed! - Duration: 00:11:47 I 11:38:46 Average Write Rate: 604 KB/s (4.0x) - Maximum Write Rate: 736 KB/s (4.9x) I 11:53:07 Operation Started! I 11:53:07 Source File: C:\DOWNLOADS\xpsp3_5512.080413-2113_fi_x86fre_spcd.iso I 11:53:07 Source File Sectors: 189,255 (MODE1/2048) I 11:53:07 Source File Size: 387,594,240 bytes I 11:53:07 Source File Volume Identifier: GRTMUPD_FI I 11:53:07 Source File Application Identifier: CDIMAGE 2.52 (03/09/2004 TM) I 11:53:07 Source File File System(s): ISO9660 I 11:53:07 Destination Device: [1:0:0] TEAC DW-224E-A A.2E (K:) (ATA) I 11:53:07 Destination Media Type: CD-R (Disc ID: 97m26s66f) I 11:53:07 Destination Media Sectors: 359,847 I 11:53:07 Write Mode: CD I 11:53:07 Write Type: SAO I 11:53:07 Write Speed: 2x I 11:53:07 Test Mode: No I 11:53:07 OPC: No I 11:53:07 BURN-Proof: Enabled I 11:53:07 Filling Buffer... (20 MB) I 11:53:07 Writing LeadIn... I 11:54:25 Writing Session 1 of 1... (1 Track, LBA: 0 - 189254) I 11:54:25 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 189254) W 12:00:24 Failed to Write Sectors 107072 - 107103 - Reason: Write Error W 12:00:24 Retrying (1 of 20)... W 12:00:24 Retry Failed - Reason: Invalid Field in CDB W 12:00:24 Retrying (2 of 20)... W 12:00:24 Retry Failed - Reason: Invalid Field in CDB W 12:00:24 Retrying (3 of 20)... W 12:00:24 Retry Failed - Reason: Invalid Field in CDB W 12:00:24 Retrying (4 of 20)... W 12:00:24 Retry Failed - Reason: Invalid Field in CDB W 12:00:24 Retrying (5 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB W 12:00:25 Retrying (6 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB W 12:00:25 Retrying (7 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB W 12:00:25 Retrying (8 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB W 12:00:25 Retrying (9 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB W 12:00:25 Retrying (10 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB W 12:00:25 Retrying (11 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB W 12:00:25 Retrying (12 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB W 12:00:25 Retrying (13 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB W 12:00:25 Retrying (14 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB W 12:00:25 Retrying (15 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB W 12:00:25 Retrying (16 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB W 12:00:25 Retrying (17 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB W 12:00:25 Retrying (18 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB W 12:00:25 Retrying (19 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB W 12:00:25 Retrying (20 of 20)... W 12:00:25 Retry Failed - Reason: Invalid Field in CDB E 12:04:42 Failed to Write Sectors 107072 - 107103 - Reason: Write Error I 12:04:43 Synchronising Cache... W 12:04:43 Synchronise Cache Failed! - Reason: Invalid Field in CDB W 12:04:43 Retrying (1 of 3)... W 12:04:43 Retry Failed - Reason: Invalid Field in CDB W 12:04:43 Retrying (2 of 3)... W 12:04:43 Retry Failed - Reason: Invalid Field in CDB W 12:04:43 Retrying (3 of 3)... W 12:04:43 Retry Failed - Reason: Invalid Field in CDB E 12:04:47 Synchronise Cache Failed! - Reason: Invalid Field in CDB W 12:04:50 User opted to skip the 'Close Track/Session/Disc' functions. E 12:04:50 Failed to Write Image! I 12:04:50 Exporting Graph Data... I 12:04:52 Graph Data File: C:\Documents and Settings\Mum\Application Data\ImgBurn\Graph Data Files\TEAC_DW-224E-A_A.2E_SUNDAY-AUGUST-30-2009_11-53_AM_97m26s66f_2x.ibg I 12:04:52 Export Successfully Completed! E 12:04:52 Operation Failed! - Duration: 00:11:43 I 12:04:52 Average Write Rate: 347 KB/s (2.3x) - Maximum Write Rate: 704 KB/s (4.7x) Link to comment Share on other sites More sharing options...
mmalves Posted August 30, 2009 Share Posted August 30, 2009 I 11:26:58 Destination Media Type: CD-R (Disc ID: 97m26s66f) Old drive and new media isn't a good combination. You could try a lens cleaning disc on the drive, buying Taiyo Yuden CD-Rs or getting a new burner. Link to comment Share on other sites More sharing options...
rouge Posted August 30, 2009 Share Posted August 30, 2009 I 11:26:58 Destination Media Type: CD-R (Disc ID: 97m26s66f) Old drive and new media isn't a good combination. You could try a lens cleaning disc on the drive, buying Taiyo Yuden CD-Rs or getting a new burner. hmmm, that's interesting, seeing it worked fine the last time i burned an iso with it. Link to comment Share on other sites More sharing options...
Recommended Posts