erer4 Posted August 30, 2009 Share Posted August 30, 2009 Hello, I have the LG GE20 dual layer DVD external burner, and am having trouble getting it to burn discs. It is recognized by my computer until I try to run Isoburn, or go into properties/recording and enable the drive. If i do either of these the drive disappears from all lists on my PC. I've tried reformatting my computer and still get the same result. Here's a log if it helps: I 21:35:02 ImgBurn Version 2.5.0.0 started! I 21:35:02 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 21:35:02 Total Physical Memory: 3,143,488 KB - Available: 2,673,924 KB W 21:35:02 Drive C:\ (FAT32) does not support single files > 4 GB in size. I 21:35:02 Initialising SPTI... I 21:35:02 Searching for SCSI / ATAPI devices... I 21:35:02 Found 1 DVD Link to comment Share on other sites More sharing options...
erer4 Posted August 30, 2009 Author Share Posted August 30, 2009 Update, I let it set for a couple minutes and this was added to the log: W 21:35:57 Device Arrival Detected! I 21:35:57 Searching for SCSI / ATAPI devices... I 21:35:57 Found 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted August 30, 2009 Share Posted August 30, 2009 Are you plugging it directly to the computer (i.e. no USB hubs or anything)? Try on the USB ports at the back of the computer. Also look for an updated USB driver for your USB chipset (you can use SIW to find out which one you have). You should also install Service Pack 3. Link to comment Share on other sites More sharing options...
erer4 Posted August 30, 2009 Author Share Posted August 30, 2009 Thanks, I tried this and still no luck. So I went ahead and made the drive internal and it seems to be working fine. Your help did lead to the solution though, thanks again!!! <3 Link to comment Share on other sites More sharing options...
Recommended Posts