rob kaos Posted September 3, 2009 Posted September 3, 2009 (edited) I'm using Verbatims, have had zero problems burning before. 2.4x speed, I'll post the log. Any help is appreciated, have a feeling the burner is done. I 20:14:15 ImgBurn Version 2.4.4.0 started! I 20:14:15 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 20:14:15 Total Physical Memory: 2,096,236 KB - Available: 1,483,492 KB I 20:14:15 Initialising SPTI... I 20:14:15 Searching for SCSI / ATAPI devices... I 20:14:17 Found 1 DVD-ROM and 1 DVD Edited September 3, 2009 by rob kaos
mmalves Posted September 3, 2009 Posted September 3, 2009 I 20:14:23 Destination Device: [2:1:0] TSSTcorp CDDVDW SH-S202J SB00 (E:) (ATA) Update ImgBurn. Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished). Try burning at 4x with a brand new blank disc, since the one from the log above was damaged in a previous failed burn.
rob kaos Posted September 3, 2009 Author Posted September 3, 2009 I 20:14:23 Destination Device: [2:1:0] TSSTcorp CDDVDW SH-S202J SB00 (E:) (ATA) Update ImgBurn. Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished). Try burning at 4x with a brand new blank disc, since the one from the log above was damaged in a previous failed burn. According to Samsung, the maker of the drive, that is the latest firmware. That or I might have accidentally downgraded to SB00 . and now I cannot find the original version because Samsung sucks.
mmalves Posted September 3, 2009 Posted September 3, 2009 You have noticed I've linked to the latest firmware in my post, right?
rob kaos Posted September 3, 2009 Author Posted September 3, 2009 You have noticed I've linked to the latest firmware in my post, right? LOL. Thank you!
Recommended Posts