seansrs968 Posted September 5, 2009 Posted September 5, 2009 I am having issues using the Imgburn. Never had problems before. I have a 64-bit Vista machine. Here is the log file: I 13:34:27 ImgBurn Version 2.5.0.0 started! I 13:34:27 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6001 : Service Pack 1) I 13:34:27 Total Physical Memory: 8,386,184 KB - Available: 5,056,952 KB W 13:34:27 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! I 13:34:27 Initialising SPTI... I 13:34:27 Searching for SCSI / ATAPI devices... I 13:34:34 Found 1 DVD-ROM/CD-RW and 1 DVD
mmalves Posted September 5, 2009 Posted September 5, 2009 I 13:35:05 Destination Device: [0:0:0] LITE-ON DVDRW LH-20A1H LL0B (E:) (ATA)I 13:35:05 Destination Media Type: DVD+R (Disc ID: RITEK-F16-01) (Speeds: 2.4x, 4x, 6x, 8x, 12x, 16x) I 13:35:05 Write Speed: 12x Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished). Have you tried burning at 8x?
Shamus_McFartfinger Posted September 6, 2009 Posted September 6, 2009 I have three concerns. 1. As mmalves has stated above, your firmware needs updating. 2. Your blank media is garbage. Ritek media is crap. Buy some Taiyo Yuden or Verbatim. End of story. 3. Yoga is bad for you. If you were meant to be able to place your testicles on your forehead, they would have been there in the first place.
Recommended Posts