swagga2high Posted September 6, 2009 Posted September 6, 2009 so i download all the stuff i need to burn the game...and i extract all the files..their is a .dvd file..i went to burn it and it got to the end and gave me an error I 12:27:15 Optimal L0 Data Zone Capacity: 1,913,760 I 12:27:15 Optimal L0 Data Zone Method: Copied From Original Disc I 12:27:15 Set L0 Data Zone Capacity Succeeded! I 12:27:16 Filling Buffer... (20 MB) I 12:27:16 Writing LeadIn... I 12:27:18 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 12:27:18 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 12:27:18 Writing Layer 0... (LBA: 0 - 1913759) I 12:46:44 Writing Layer 1... (LBA: 1913760 - 3827487) I 13:06:13 Synchronising Cache... I 13:06:14 Closing Track... W 13:06:29 Potential 'WaitImmediateIO' Deferred Error - (99%, 0/3) - Empty or Partially Written Reserved Track W 13:06:29 Close Track Failed! - Reason: Empty or Partially Written Reserved Track W 13:06:29 Retrying (1 of 3)... I 13:06:30 Finalising Disc... W 13:07:34 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead Out W 13:07:34 Finalise Disc Failed! - Reason: Session Fixation Error Writing Lead Out W 13:07:34 Retrying (1 of 3)... W 13:07:50 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In W 13:07:50 Retry Failed - Reason: Session Fixation Error Writing Lead In W 13:07:50 Retrying (2 of 3)... W 13:08:55 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead Out W 13:08:55 Retry Failed - Reason: Session Fixation Error Writing Lead Out W 13:08:55 Retrying (3 of 3)... W 13:09:18 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead In W 13:09:18 Retry Failed - Reason: Session Fixation Error Writing Lead In W 13:50:33 Retrying (4)... W 13:51:08 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Session Fixation Error Writing Lead Out W 13:51:08 Retry Failed - Reason: Session Fixation Error Writing Lead Out I 13:51:12 Exporting Graph Data... I 13:51:12 Graph Data File: C:\Documents and Settings\Compaq_Owner\Application Data\ImgBurn\Graph Data Files\LITE-ON_DVDRW_SOHW-1633S_BPSA_SATURDAY-SEPTEMBER-05-2009_12-27_PM_MKM-001-00_4x.ibg I 13:51:12 Export Successfully Completed! I 13:51:12 Operation Successfully Completed! - Duration: 01:23:55 I 13:51:12 Average Write Rate: 3,279 KB/s (2.4x) - Maximum Write Rate: 3,394 KB/s (2.5x) I 13:51:21 Close Request Acknowledged I 13:51:21 Closing Down... I 13:51:21 Shutting down SPTI... I 13:51:21 ImgBurn closed! can anyone help me with this please
swagga2high Posted September 6, 2009 Author Posted September 6, 2009 Please post the full log. I 12:09:25 ImgBurn Version 2.5.0.0 started! I 12:09:25 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 12:09:25 Total Physical Memory: 720,368 KB - Available: 77,876 KB W 12:09:25 Drive D:\ (FAT32) does not support single files > 4 GB in size. I 12:09:25 Initialising SPTI... I 12:09:25 Searching for SCSI / ATAPI devices... I 12:09:26 Found 1 DVD
Cynthia Posted September 6, 2009 Posted September 6, 2009 There is a later firmware version. http://www.firmwarehq.com/Lite-On/SOHW-1633S/files.html 2.4x is the only write speed with the firmware you used before. The first part of the log failed. You then tried to use the same disc as before and that didn't worked as it was already been used. Older Lite-Ons can be tricky to burn double layer discs with.
swagga2high Posted September 6, 2009 Author Posted September 6, 2009 There is a later firmware version. http://www.firmwarehq.com/Lite-On/SOHW-1633S/files.html 2.4x is the only write speed with the firmware you used before. so i need to use later firmware???
Cynthia Posted September 6, 2009 Posted September 6, 2009 It wouldn't hurt to try. I doubt it will work. Might also wanna try to clean the laser head with a cleaning disc. If you still get burning errors after the firmware update + cleaning, get a new burner.
swagga2high Posted September 6, 2009 Author Posted September 6, 2009 It wouldn't hurt to try. I doubt it will work. Might also wanna try to clean the laser head with a cleaning disc. If you still get burning errors after the firmware update + cleaning, get a new burner. that could be the only two options?
Cynthia Posted September 6, 2009 Posted September 6, 2009 You are using the best media on the market. So media can be ruled out. The other two parameters are firmware update and change in write speed. You only have one write speed to play with (2.4x). It's an old burner so it could need a cleaning. I doubt that will help. Older Lite-Ons are notoriously tricky to burn double layer discs with.
swagga2high Posted September 6, 2009 Author Posted September 6, 2009 You are using the best media on the market. So media can be ruled out. The other two parameters are firmware update and change in write speed. You only have one write speed to play with (2.4x). It's an old burner so it could need a cleaning. I doubt that will help. Older Lite-Ons are notoriously tricky to burn double layer discs with. ok what would be a good burner for meto buy i was just at walmart and looking at burners but wasnt sure if they were any good
swagga2high Posted September 6, 2009 Author Posted September 6, 2009 well they dont even have firmware for mycurrent drive... Lite-On SOHW-1633S BPSA is the drive...that firmware is onle for 1633s
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now