Rob Mattes Posted September 12, 2009 Posted September 12, 2009 I'm making my first attempt at writing an ISO file to a DVD. The log file is below: I 15:43:44 ImgBurn Version 2.5.0.0 started! I 15:43:44 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 15:43:44 Total Physical Memory: 3,668,396 KB - Available: 3,182,536 KB I 15:43:44 Initialising SPTI... I 15:43:44 Searching for SCSI / ATAPI devices... I 15:43:44 Found 1 DVD
mmalves Posted September 12, 2009 Posted September 12, 2009 I 15:43:56 Source File Sectors: 2,895,552 (MODE1/2048)I 15:43:56 Destination Media Sectors: 2,298,496 You'll need to use dual-layer media in order to burn that ISO.
Rob Mattes Posted September 12, 2009 Author Posted September 12, 2009 I 15:43:56 Source File Sectors: 2,895,552 (MODE1/2048)I 15:43:56 Destination Media Sectors: 2,298,496 You'll need to use dual-layer media in order to burn that ISO. Any recommendation on brand or "model" of media I should be using? Also, do I need to do anything special in ImgBurn to tell it to burn to dual layter media? Sorry, I really am a noob at this... -Rob
mmalves Posted September 12, 2009 Posted September 12, 2009 The recommended media for a successful burn is Verbatim 2.4x DVD+R DL blanks (it's a link you can click for more information ). And you don't need to change anything in ImgBurn before burning that
Rob Mattes Posted September 12, 2009 Author Posted September 12, 2009 BINGO! I went out and got the exact Verbatim disks specified from Best Buy, loaded one up, and the ISO burned flawlessly. Thanks a TON for the help, mmalves! Gratefully, -Rob
Recommended Posts