I/O error message

[Jimbo]

I* am constantly receiving an I/O message, I am burning with a Benq 1620 with an external enclosure

 

I 18:08:21 ImgBurn Version 2.5.0.0 started!

I 18:08:21 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 18:08:21 Total Physical Memory: 1,833,744 KB - Available: 919,868 KB

I 18:08:21 Initialising SPTI...

I 18:08:21 Searching for SCSI / ATAPI devices...

E 18:08:22 Device->Initialise() Failed!

E 18:08:22 Device: [0:0:0] (F (USB)

E 18:08:22 This drive is currently locked for exclusive access by 'DVDFab.exe_004884'.

E 18:08:22 Device->Initialise() Failed!

E 18:08:22 Device: [0:0:0] (F (USB)

E 18:08:22 This drive will not be visible in the program.

I 18:08:22 Found 2 DVD

[KasparP]

I believe that the program "DVD FAB" is running in the background and is using the drive for whatever purposes. It might not be burning, but as long as its scanning waiting for media its using it.

[Cynthia]

Hi and welcome to the forum, Jimbo!

 

E 18:08:22 This drive is currently locked for exclusive access by 'DVDFab.exe_004884'.

I guess you are burning from the inside of DVDFab?

 

The same issue if you use one DVD reader/burner as source and the other DVD reader/burner as the burning target?

 

If you are burning the files directly with ImgBurn, what happens if you close down DVDFab first?

[Cynthia]

Just did a test in that program and used the same USB burner as both source and target and no issues.

 

I 05:44:20 ImgBurn Version 2.5.0.0 started!

I 05:44:20 Microsoft Windows Vista Ultimate Edition (6.0, Build 6002 : Service Pack 2)

I 05:44:20 Total Physical Memory: 2 095 484 KB - Available: 723 740 KB

I 05:44:20 Initialising SPTI...

I 05:44:20 Searching for SCSI / ATAPI devices...

I 05:44:21 Found 2 DVD

[Jimbo]

Hi and welcome to the forum, Jimbo!

 

E 18:08:22 This drive is currently locked for exclusive access by 'DVDFab.exe_004884'.

I guess you are burning from the inside of DVDFab?

 

The same issue if you use one DVD reader/burner as source and the other DVD reader/burner as the burning target?

 

If you are burning the files directly with ImgBurn, what happens if you close down DVDFab first?

Hi Cynthia, thanks for the welcome, I am not burning from Dvd Fab, I am not using Imgburn as DvdFabs burner. wiil try to close down Fab, seems funny

tho, I have the same setup on another computer with no problems, its going to be something of a hassle to remember to shut Fab every time I use a program that utilizes

Imgburn, does the fact that it is an external enclosure have any bearing? Thanks, Jim.

[Jimbo]

Hi and welcome to the forum, Jimbo!

 

E 18:08:22 This drive is currently locked for exclusive access by 'DVDFab.exe_004884'.

I guess you are burning from the inside of DVDFab?

 

The same issue if you use one DVD reader/burner as source and the other DVD reader/burner as the burning target?

 

If you are burning the files directly with ImgBurn, what happens if you close down DVDFab first?

Hi Cynthia, thanks for the welcome, I am not burning from Dvd Fab, I am not using Imgburn as DvdFabs burner. wiil try to close down Fab, seems funny

tho, I have the same setup on another computer with no problems, its going to be something of a hassle to remember to shut Fab every time I use a program that utilizes

Imgburn, does the fact that it is an external enclosure have any bearing? Thanks, Jim.

Duh, I am getting what you meant now Cynthia, I had a version of Fab still opened from a previous burn, and did not shut it, so the trick is to make sure I close Fab after each use. Thanks again

[Jimbo]

Hi and welcome to the forum, Jimbo!

 

E 18:08:22 This drive is currently locked for exclusive access by 'DVDFab.exe_004884'.

I guess you are burning from the inside of DVDFab?

 

The same issue if you use one DVD reader/burner as source and the other DVD reader/burner as the burning target?

 

If you are burning the files directly with ImgBurn, what happens if you close down DVDFab first?

Hi Cynthia, thanks for the welcome, I am not burning from Dvd Fab, I am not using Imgburn as DvdFabs burner. wiil try to close down Fab, seems funny

tho, I have the same setup on another computer with no problems, its going to be something of a hassle to remember to shut Fab every time I use a program that utilizes

Imgburn, does the fact that it is an external enclosure have any bearing? Thanks, Jim.

Duh, I am getting what you meant now Cynthia, I had a version of Fab still opened from a previous burn, and did not shut it, so the trick is to make sure I close Fab after each use. Thanks again

Thought it was fixed, closed all Fab windows Still:

; //****************************************\\

; ImgBurn Version 2.5.0.0 - Log

; Sunday, 13 September 2009, 04:42:11

; \\****************************************//

;

;

I 03:37:44 ImgBurn Version 2.5.0.0 started!

I 03:37:44 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 03:37:44 Total Physical Memory: 1,833,744 KB - Available: 925,984 KB

I 03:37:44 Initialising SPTI...

I 03:37:44 Searching for SCSI / ATAPI devices...

I 03:37:45 Found 1 DVD

[LIGHTNING UK!]

It should be burning at 16x with it set to MAX and yet yours is going at 4x.

 

Load the IBG file and post a screenshot so we can see it (or post up the IBG itself so we can do it).

[Jimbo]

It should be burning at 16x with it set to MAX and yet yours is going at 4x.

 

Load the IBG file and post a screenshot so we can see it (or post up the IBG itself so we can do it).

LUK, Thanks for your attention, I have never posted eiher of the things you requested, I,ll be glad to with a little help.

Thanks,

Jimbo

[Cynthia]

Attach this file to a posting window. You need to press the 'More Options' button in the posting window to see the attach stuff option.

 

I 04:41:11 Graph Data File: C:\Users\durkinjt\AppData\Roaming\ImgBurn\Graph Data Files\BENQ_DVD_DD_DW1620_B7W9_SUNDAY-SEPTEMBER-13-2009_3-39_AM_RITEK-F16-01_MAX.ibg

You can also open up the graph file in the free program BurnPlot, that you can find here:

 

http://www.imgburn.com/index.php?act=download

 

or/and then just post a graphic image of the file.

 

[Jimbo]

Attach this file to a posting window. You need to press the 'More Options' button in the posting window to see the attach stuff option.

 

I 04:41:11 Graph Data File: C:\Users\durkinjt\AppData\Roaming\ImgBurn\Graph Data Files\BENQ_DVD_DD_DW1620_B7W9_SUNDAY-SEPTEMBER-13-2009_3-39_AM_RITEK-F16-01_MAX.ibg

You can also open up the graph file in the free program BurnPlot, that you can find here:

 

http://www.imgburn.com/index.php?act=download

 

or/and then just post a graphic image of the file.

 

Cynthia ,please excuse my ignorance, but how do I attach this file(not sure what file) or open the graph line in the free program Burnplot.