SLOVEHEART Posted September 17, 2009 Posted September 17, 2009 (edited) I have read the guide on booktyping, and I have used a bitsetting fw for this sony optiarc ad-7240s drive from Liggy & Lee. I am using BD Rebuilder to make dvd9 discs - and I am trying to get imgburn to not set the booktype to dvd-rom, as this is not what I've read is good for BD to DVD9 encoded disks to be read in players. So I have my bitsetting by NEC Win Flash to dvd+r dl and I have unchecked auto booktype change in Imgburn write settings, but when I use the build mode I still get a DVD-ROM booktype. What do I have to do to get it changed, the drive is a sony, not a NEC, so I don't see how I can use advanced features to set booktype - can anyone offer some help with this??? Edited September 17, 2009 by SLOVEHEART
mmalves Posted September 17, 2009 Posted September 17, 2009 http://en.wikipedia.org/wiki/Optiarc = Sony + NEC Wherever you read that, it's wrong information: DVD+R DL media booktyped to DVD-ROM is more compatible with DVD devices of all kinds. This is so true, in fact, that most burners automatically booktype DVD+R DL media to DVD-ROM by themselves (it's set to do so in their firmware), which is probably why yours is being booktyped even though you disabled that option in ImgBurn's settings.
SLOVEHEART Posted September 17, 2009 Author Posted September 17, 2009 http://en.wikipedia.org/wiki/Optiarc = Sony + NEC Wherever you read that, it's wrong information: DVD+R DL media booktyped to DVD-ROM is more compatible with DVD devices of all kinds. This is so true, in fact, that most burners automatically booktype DVD+R DL media to DVD-ROM by themselves (it's set to do so in their firmware), which is probably why yours is being booktyped even though you disabled that option in ImgBurn's settings. just recently sony hastaken over complete control of optiarc, contrary to your wiki info, if I find the info link I'll post it - it use to be a joint venture - not anymore...
mmalves Posted September 17, 2009 Posted September 17, 2009 It says that in the wiki link I posted above
LIGHTNING UK! Posted September 17, 2009 Posted September 17, 2009 If you've unchecked the auto booktype option in ImgBurn, just change the permanent DVD+R DL settings via the NEC tab in the book type setting feature within ImgBurn. You'd also need to make sure the permanent one is the 'active' one - again via that same feature.
SLOVEHEART Posted September 17, 2009 Author Posted September 17, 2009 (edited) If you've unchecked the auto booktype option in ImgBurn, just change the permanent DVD+R DL settings via the NEC tab in the book type setting feature within ImgBurn. You'd also need to make sure the permanent one is the 'active' one - again via that same feature. IT WORKS, THANKS Lightning Edited September 17, 2009 by SLOVEHEART
Cynthia Posted September 17, 2009 Posted September 17, 2009 It says 'Success' when I do it. Drive (For DVD+R DL media) -> New setting: Normal Edit: Mrs Slow here again...
Recommended Posts