Saq Posted September 18, 2009 Posted September 18, 2009 Hi I was recently burning Xbox 360 iso's when I had Windows XP installed using ImgBurn. I've now installed Windows 7 and have setup ImgBurn as it should be setup, however when burning a game, i receive the following error: Here is the Log of a Write + Verify Operation: I 23:47:53 ImgBurn Version 2.5.0.0 started! I 23:47:53 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600) I 23:47:53 Total Physical Memory: 3,668,472 KB - Available: 2,784,796 KB I 23:47:53 Initialising SPTI... I 23:47:53 Searching for SCSI / ATAPI devices... I 23:47:54 Found 1 DVD
mmalves Posted September 19, 2009 Posted September 19, 2009 Look for the latest drivers for the motherboard's chipset or IDE controller where the burner is connected to. Use SIW to find out the brand/model if you don't know.
Saq Posted September 19, 2009 Author Posted September 19, 2009 Look for the latest drivers for the motherboard's chipset or IDE controller where the burner is connected to. Use SIW to find out the brand/model if you don't know. thanks i have the m2n-e Asus motherboard: Property Value Manufacturer ASUSTeK Computer INC. Model M2N-E Version 1.XX Serial Number 123456789000 North Bridge NVIDIA nForce 570 SLI Revision A1 South Bridge NVIDIA nForce 570 SLI Revision A1 CPU AMD Athlon 64 X2 Dual Core Processor 3800+ Cpu Socket Socket AM2 (940) I just updated the driver to the latest one available (Vista) and it still gives me the same error when I go to burn the ISO.
Cynthia Posted September 19, 2009 Posted September 19, 2009 Sounds to me as you should try to find nVidia chip set drivers for Win 7. The Vista ones might be not working so good. The 6x write speed is the one I use with that burner and media code when I burn, as it seems to give the best results.
mmalves Posted September 19, 2009 Posted September 19, 2009 Install this driver and try burning again.
Saq Posted September 20, 2009 Author Posted September 20, 2009 Install this driver and try burning again. thanks for that mate but i'm still getting the same error! This is so frustrating! Anyone
mmalves Posted September 20, 2009 Posted September 20, 2009 Are you using the latest BIOS version? All IDE settings in BIOS are in Auto?
Raitzi Posted September 20, 2009 Posted September 20, 2009 I have same problem after xp -> win7. I still have xp on other drive and everything works well in that OS. First i was getting power calibration errors and then as burning went trough i gave me I/O error in verification. I have Plextor px-760SA drive.
mmalves Posted September 20, 2009 Posted September 20, 2009 I have same problem after xp -> win7. I still have xp on other drive and everything works well in that OS.First i was getting power calibration errors and then as burning went trough i gave me I/O error in verification. I have Plextor px-760SA drive. Please start your own thread and also post a log.
Saq Posted September 20, 2009 Author Posted September 20, 2009 Are you using the latest BIOS version? All IDE settings in BIOS are in Auto? thanks for the reply. Yep the BIOS is up to date and IDE is auto.
mmalves Posted September 20, 2009 Posted September 20, 2009 If the latest driver didn't solve the problem then I guess you'll need to either buy an IDE-to-SATA adapter to use your current burner or you'll need to buy a new SATA burner.
Saq Posted September 20, 2009 Author Posted September 20, 2009 If the latest driver didn't solve the problem then I guess you'll need to either buy an IDE-to-SATA adapter to use your current burner or you'll need to buy a new SATA burner. thanks for the tip, i'll try the adapter :-)
Saq Posted September 21, 2009 Author Posted September 21, 2009 If the latest driver didn't solve the problem then I guess you'll need to either buy an IDE-to-SATA adapter to use your current burner or you'll need to buy a new SATA burner. much appreciated for your help. I tried the adapter and so far my ISO is in the process of being burnt :-) You now have legend status!
Recommended Posts