Invalid Address for Write

[Bies]

Hi guys,

 

for me its the 1. Time that i am Burning Xbox360 games.

 

For this i bought an LG GH22LP20 DVD Writer with 1.02 Firmware and Verbatim DVD+R DL 8,5GB 8x DVDs...

 

Everytime i was writing with ImgBurn i get this Error at 20-25%

 

I 15:59:32 ImgBurn Version 2.5.0.0 started!

I 15:59:32 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 15:59:32 Total Physical Memory: 3.668.460 KB - Available: 3.099.216 KB

W 15:59:32 SPTD can have a detrimental effect on drive performance.

I 15:59:32 Initialising SPTI...

I 15:59:32 Searching for SCSI / ATAPI devices...

I 15:59:32 Found 2 DVD

[Cynthia]

Hi and welcome to the forum, Bies!

 

I 16:00:14 Destination Device: [0:1:0] HL-DT-ST DVD-RAM GH22LP20 1.02 (J:) (ATA)

I 16:00:14 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x; 10x)

I 16:00:14 Write Speed: 2x

W 16:00:14 Write Speed Miscompare! - Wanted: 2.770 KB/s (2x), Got: 5.540 KB/s (4x)

There is a later firmware for your burner (1.04) that might work better.

 

http://www.firmwarehq.com/LG/GH22LP20/files.html

 

(No disc in the tray when you flash it)

 

The speeds you can play around with are these ones: 4x; 6x; 8x; 10x.

[Bies]

Hi and welcome to the forum, Bies!

 

I 16:00:14 Destination Device: [0:1:0] HL-DT-ST DVD-RAM GH22LP20 1.02 (J:) (ATA)

I 16:00:14 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x; 6x; 8x; 10x)

I 16:00:14 Write Speed: 2x

W 16:00:14 Write Speed Miscompare! - Wanted: 2.770 KB/s (2x), Got: 5.540 KB/s (4x)

There is a later firmware for your burner (1.04) that might work better.

 

http://www.firmwarehq.com/LG/GH22LP20/files.html

 

(No disc in the tray when you flash it)

 

The speeds you can play around with are these ones: 4x; 6x; 8x; 10x.

 

Hi Cynthia

 

I`d patch the firmware to 1.04 and tryed to write with 4x and 8x but allways same error accures

[Cynthia]

It's a rather new burner but if it can't burn Verbatims - then there is something wrong with it. Any warranty left?

[Bies]

It's a rather new burner but if it can't burn Verbatims - then there is something wrong with it. Any warranty left?

 

Yes i bought it today

[Cynthia]

Might not affect you but if you have an ASUS motherboad and use the jMicron IDE connectors it could be the issue of the errors.

 

Also check that the Slave/Master/CS jumpers are right set in the back of the burner.

[Bies]

Might not affect you but if you have an ASUS motherboad and use the jMicron IDE connectors it could be the issue of the errors.

 

Also check that the Slave/Master/CS jumpers are right set in the back of the burner.

 

Yes its IDE connected.

I switched the DvD recorder to its own IDE Cable and Port now. Also the burner is set as 2.Slave and my HDD is set as 1.Master.

Will check this now maybe its working better....

 

Edit: Ok no changes.. will bring back the DvD Recorder and change it to an other with S-ATA connection. Hope this will solf this problem.

Edited September 19, 2009 by Bies