delsolkid Posted September 20, 2009 Posted September 20, 2009 yes i use cheap tdk dual layers but they seem to work perfect for my friend at his house... so please tell me if i am doing anything wrong? this one got 99% done then failed, so close and yet defeated... 1 blank tdk dl to go so any suggestions for my next attempt? I 13:16:08 Operation Started! I 13:16:08 Source File: C:\Users\josh\repaired and extracted\!RnE - 2009.09.20 05.57.32 - nig-m10\nig-m10.dvd I 13:16:08 Source File Sectors: 3,827,488 (MODE1/2048) I 13:16:08 Source File Size: 7,838,695,424 bytes I 13:16:08 Source File Volume Identifier: DVD_ROM I 13:16:08 Source File Volume Set Identifier: 356fc000MS UDFBridge I 13:16:08 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 13:16:08 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 13:16:08 Source File File System(s): ISO9660, UDF (1.50) I 13:16:08 Destination Device: [0:1:0] HL-DT-ST DVDRAM GSA-T50F TT03 (D:) (ATAPI) I 13:16:08 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x) I 13:16:08 Destination Media Sectors: 4,173,824 I 13:16:08 Write Mode: DVD I 13:16:08 Write Type: DAO I 13:16:08 Write Speed: 4x I 13:16:08 Link Size: Auto I 13:16:08 Lock Volume: Yes I 13:16:08 Test Mode: No I 13:16:08 OPC: No I 13:16:08 BURN-Proof: Enabled I 13:16:08 Book Type Setting: N/A I 13:16:08 User Specified L0 Data Zone Capacity: 1,913,760 I 13:17:13 Set L0 Data Zone Capacity Succeeded! I 13:17:14 Filling Buffer... (40 MB) I 13:17:15 Writing LeadIn... I 13:17:20 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 13:17:20 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 13:17:20 Writing Layer 0... (LBA: 0 - 1913759) I 13:30:03 Writing Layer 1... (LBA: 1913760 - 3827487) W 13:42:39 Failed to Write Sectors 3798944 - 3798975 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x90) W 13:42:39 Retrying (1 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (2 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (3 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (4 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (5 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (6 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (7 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (8 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (9 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (10 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (11 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (12 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (13 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (14 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (15 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (16 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (17 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (18 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (19 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write W 13:42:39 Retrying (20 of 20)... W 13:42:39 Retry Failed - Reason: Invalid Address For Write E 13:45:20 Failed to Write Sectors 3798944 - 3798975 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x90) E 13:45:20 Next Writable Address: 3798400 I 13:45:20 Synchronising Cache... I 13:45:23 Closing Track... I 13:45:29 Finalising Disc... E 13:46:43 Failed to Write Image! I 13:46:43 Exporting Graph Data... I 13:46:43 Graph Data File: C:\Users\josh\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T50F_TT03_SUNDAY-SEPTEMBER-20-2009_1-16_PM_RITEK-S04-66_4x.ibg I 13:46:43 Export Successfully Completed! E 13:46:43 Operation Failed! - Duration: 00:30:35 I 13:46:43 Average Write Rate: 4,525 KB/s (3.3x) - Maximum Write Rate: 5,610 KB/s (4.1x)
KasparP Posted September 20, 2009 Posted September 20, 2009 Try burning at a different speed. If that doesnt work I would recommend updating your firmware. Since its a laptop its kinda hard to find since most drives are just boxed up drives. You didnt include the first part of your log so I cant help you there. Go to your laptop manufacturer website and find firmware for your DVD burner. Another reason is that either your lens is dirty(buy a cleaning disk) or you need to use high quality disks(such as verbatims!) the reason for this is because your driver might not support that dye, but practically every drive supports verbs. All in all, I would recommend getting a external burner, laptop burners are JUNK!
spinningwheel Posted September 21, 2009 Posted September 21, 2009 yes i use cheap tdk dual layers but they seem to work perfect for my friend at his house You already know what your problem is...Your choices are simple... 1. Do as KasparP advises in his post. OR 2. Burn your discs on your friends PC.
Recommended Posts