John_smith Posted September 24, 2009 Share Posted September 24, 2009 Hello all, I need help. First off i LOVE imgburn, great software. I do have a very annoying issue.. It does not do this everytime but when I burn a dual layer ISO during the burning process the Write Rate drops to 0.00 and the Time Remaining reads UNKNOWN. It locks up and I have to restart my computer. It does not do it everytime perhaps about 25% however recently I've made 5 coasters in a row I've turned off any un needed services rebooted end tasked on any un needed processes and launched only imgburn.. I am using Verbatim DL dvd+r and burning at 2.4x on a winxp 64 bit machine. Its headless box so I only RDP into this machine to launch burn discs. Thanks so much for any help in advance. Below is the log and a screenshot. I 10:35:00 ImgBurn Version 2.5.0.0 started! I 10:35:00 Microsoft Windows XP Professional x64 Edition (5.2, Build 3790 : Service Pack 2) I 10:35:00 Total Physical Memory: 4,192,460 KB - Available: 3,350,060 KB I 10:35:00 Initialising SPTI... I 10:35:00 Searching for SCSI / ATAPI devices... I 10:35:01 Found 1 DVD Link to comment Share on other sites More sharing options...
Cynthia Posted September 24, 2009 Share Posted September 24, 2009 Hi and welcome to the forum, John_smith! I 10:35:14 Destination Device: [4:0:0] PIONEER DVD-RW DVR-115D 1.13 (X:) (SCSI) There is a later version of the firmware 1.22. http://www.firmwarehq.com/Pioneer/DVR-115D/files.html You have the latest chipset drivers for the motherboard installed? Link to comment Share on other sites More sharing options...
Recommended Posts