MindTriiiickz Posted September 28, 2009 Posted September 28, 2009 Hi, I've been trying to burn an iso file to a vertabim dvd+r but i've been running into lots of problems. I've used other programs, and it's still not working. THe thing is, I've burnt isos to dvd+r's before. Here's my error log. Oh and by the way, I'm using a Toshiba A200-1VG Laptop I 18:18:59 ImgBurn Version 2.5.0.0 started!I 18:18:59 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 18:18:59 Total Physical Memory: 2,086,596 KB - Available: 1,214,308 KB W 18:18:59 SPTD can have a detrimental effect on drive performance. I 18:18:59 Initialising SPTI... I 18:18:59 Searching for SCSI / ATAPI devices... I 18:19:00 Found 1 DVD
mmalves Posted September 28, 2009 Posted September 28, 2009 I 18:21:33 Destination Device: [1:0:0] TSSTcorp CDDVDW TS-L632H TO01 (E:) (ATA) Apply the TO03 firmware update (remove any disc and close the tray before updating then reboot after it's finished) and try again. Also try burning at 4x, 6x or 8x to see if you get a better quality burn.
MindTriiiickz Posted September 28, 2009 Author Posted September 28, 2009 Ok thanks, I'll give that a go now
MindTriiiickz Posted September 28, 2009 Author Posted September 28, 2009 I 18:21:33 Destination Device: [1:0:0] TSSTcorp CDDVDW TS-L632H TO01 (E:) (ATA) Apply the TO03 firmware update (remove any disc and close the tray before updating then reboot after it's finished) and try again. Also try burning at 4x, 6x or 8x to see if you get a better quality burn. I've tried what you said, and I've still got a problem any ideas? Thanks (I tried at 4x and 6x) I 19:01:43 ImgBurn Version 2.5.0.0 started!I 19:01:43 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 19:01:43 Total Physical Memory: 2,086,596 KB - Available: 1,078,000 KB W 19:01:43 SPTD can have a detrimental effect on drive performance. I 19:01:43 Initialising SPTI... I 19:01:43 Searching for SCSI / ATAPI devices... I 19:01:44 Found 1 DVD
mmalves Posted September 28, 2009 Posted September 28, 2009 Open then close the drive's tray and try using the Verify mode to verify that disc against the source ISO image. Does it work if you do it this way? If it doesn't, could you try verifying with another drive? As a last resort you could try a lens cleaning disc on that burner but I'm not sure if it'll help
MindTriiiickz Posted September 28, 2009 Author Posted September 28, 2009 Open then close the drive's tray and try using the Verify mode to verify that disc against the source ISO image. Does it work if you do it this way? If it doesn't, could you try verifying with another drive? As a last resort you could try a lens cleaning disc on that burner but I'm not sure if it'll help I tried doing that, and I got this error message I 20:07:04 Operation Started!I 20:07:04 Source Device: [1:0:0] TSSTcorp CDDVDW TS-L632H TO03 (E:) (ATA) I 20:07:04 Source Media Type: DVD+R (Book Type: DVD+R) (Disc ID: MCC-004-00) (Speeds: 3x, 4x, 6x, 8x) I 20:07:04 Image File: C:\Users\Tom\Desktop\iATKOS_v7\iATKOS_v7\iATKOS_v7\iATKOS_v7.iso I 20:07:04 Image File Sectors: 1,835,504 (MODE1/2048) I 20:07:04 Image File Size: 3,759,112,192 bytes I 20:07:04 Image File Volume Identifier: iATKOS_v7 I 20:07:04 Image File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR © 1993 E.YOUNGDALE © 1997 J.PEARSON/J.SCHILLING I 20:07:04 Image File File System(s): ISO9660 (Bootable) I 20:07:04 Read Speed (Data/Audio): 4x / 8x E 20:07:08 Session 1, Track 1 is smaller on the disc than it is in the image file. E 20:07:08 Disc's Track Sectors: 0 (TOC Sectors: 0) E 20:07:08 Image File's Track Sectors: 1835504 (TOC Sectors: 1835504) E 20:07:08 Operation Failed! - Duration: 00:00:04 I 20:07:08 Average Verify Rate: N/A - Maximum Verify Rate: N/A
mmalves Posted September 28, 2009 Posted September 28, 2009 Try the verify with another drive then so that we know if the disc is good or not.
Recommended Posts