layer break problem with I/O on my laptop drive

[bugardx]

Hi, I'm burning from my laptop with Mashita UJ-850 z drive and first get this message:

 

user specified layer break position is such that L0<L1 THIS IS NOT ALLOWED

 

then when burning I get this log:

 

I 21:19:31 Source File Sectors: 4,173,824 (MODE1/2048)

I 21:19:31 Source File Size: 8,547,991,552 bytes

I 21:19:31 Source File Volume Identifier: DISCOVERY_IMAGE

I 21:19:31 Source File File System(s): None

I 21:19:31 Destination Device: [1:0:0] MATSHITA DVD-RAM UJ-850 z RB32 (D:) (ATA)

I 21:19:31 Destination Media Type: DVD+R DL (Disc ID: CMC MAG-D03-64) (Speeds: 2.4x, 4x)

I 21:19:31 Destination Media Sectors: 4,173,824

I 21:19:31 Write Mode: DVD

I 21:19:31 Write Type: DAO

I 21:19:31 Write Speed: 2.4x

I 21:19:31 Link Size: Auto

I 21:19:31 Lock Volume: Yes

I 21:19:31 Test Mode: No

I 21:19:31 OPC: No

I 21:19:31 BURN-Proof: Enabled

W 21:23:13 User specified layer break position is such that L0 < L1.

W 21:23:13 Image Size: 4,173,824

W 21:23:13 User Specified L0 Sectors: 1,913,760

W 21:23:13 Calculated L1 Sectors: 2,260,064

I 21:23:13 User Specified L0 Data Zone Capacity: 1,913,760

I 21:23:37 Set L0 Data Zone Capacity Succeeded!

I 21:23:37 Filling Buffer... (40 MB)

I 21:23:37 Writing LeadIn...

I 21:23:39 Writing Session 1 of 1... (1 Track, LBA: 0 - 4173823)

I 21:23:39 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4173823)

I 21:23:39 Writing Layer 0... (LBA: 0 - 1913759)

I 21:43:43 Writing Layer 1... (LBA: 1913760 - 4173823)

W 22:03:54 Failed to Write Sectors 3827520 - 3827551 - Reason: Invalid Address For Write

Edited October 10, 2009 by bugardx

[LIGHTNING UK!]

Why are you in discovery mode? You know what that mode does/is for, right?

 

You've set up a fixed layer break value in the settings - something there's no reason to change away from the default of 'Calculate Optimal' - and that's why you're getting the error.