Jump to content

Write errors with Verbatims


johngal

Recommended Posts

Hi,

 

I’m having problems with, yes xbox 360 backups.

I’m using Verbatims but am getting a lot of failures. (30% ish).

Is it possible I’ve just got some bad disks that I need to take back? (Should be an interesting conversation in Maplins that).

Below is the log of a failure, if anyone can point to anything that I’m doing wrong, quite likely, that would be great.

I should say that when they burn they work fine.

 

Thanks

John

 

 

I 01:02:14 ImgBurn Version 2.5.0.0 started!

I 01:02:14 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7100)

I 01:02:14 Total Physical Memory: 8,387,576 KB - Available: 6,892,964 KB

I 01:02:14 Initialising SPTI...

I 01:02:14 Searching for SCSI / ATAPI devices...

I 01:02:15 Found 1 DVD±RW/RAM!

I 01:02:36 Operation Started!

I 01:02:36 Source File: E:\Xbox iso\Burnt\By Me\Soul Caliber\kfc-sc4.dvd

I 01:02:36 Source File Sectors: 3,825,924 (MODE1/2048)

I 01:02:36 Source File Size: 7,835,492,352 bytes

I 01:02:36 Source File Volume Identifier: XGD2DVD_NTSC

I 01:02:36 Source File Volume Set Identifier: 34672923

I 01:02:36 Source File Implementation Identifier: Sonic Scenarist 3.1

I 01:02:36 Source File File System(s): ISO9660, UDF (1.02)

I 01:02:36 Destination Device: [3:0:0] HL-DT-ST DVD+-RW GH30N A102 (G:) (ATA)

I 01:02:36 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x)

I 01:02:36 Destination Media Sectors: 4,173,824

I 01:02:36 Write Mode: DVD

I 01:02:36 Write Type: DAO

I 01:02:36 Write Speed: 4x

I 01:02:36 Link Size: Auto

I 01:02:36 Lock Volume: Yes

I 01:02:36 Test Mode: No

I 01:02:36 OPC: No

I 01:02:36 BURN-Proof: Enabled

I 01:02:37 Book Type Setting: N/A

I 01:02:37 Optimal L0 Data Zone Capacity: 1,913,760

I 01:02:37 Optimal L0 Data Zone Method: Copied From Original Disc

I 01:02:37 Set L0 Data Zone Capacity Succeeded!

I 01:02:37 Filling Buffer... (40 MB)

I 01:02:38 Writing LeadIn...

I 01:03:11 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923)

I 01:03:11 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923)

I 01:03:11 Writing Layer 0... (LBA: 0 - 1913759)

W 01:11:28 Failed to Write Sectors 1339584 - 1339615 - Reason: Write Error

W 01:11:28 Retrying (1 of 20)...

W 01:11:30 Retry Failed - Reason: No Seek Complete

W 01:11:30 Retrying (2 of 20)...

W 01:11:30 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (3 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (4 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (5 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (6 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (7 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (8 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (9 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (10 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (11 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (12 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (13 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (14 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (15 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (16 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (17 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (18 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (19 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:11:31 Retrying (20 of 20)...

W 01:11:31 Retry Failed - Reason: Invalid Address For Write

W 01:13:30 Retrying (21)...

W 01:13:30 Retry Failed - Reason: Invalid Address For Write

E 01:13:40 Failed to Write Sectors 1339584 - 1339615 - Reason: Write Error

E 01:13:40 Next Writable Address: 0

I 01:13:41 Synchronising Cache...

W 01:13:43 User opted to skip the 'Close Track/Session/Disc' functions.

E 01:13:43 Failed to Write Image!

I 01:13:46 Exporting Graph Data...

I 01:13:46 Graph Data File: C:\Users\John\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVD+-RW_GH30N_A102_11-OCTOBER-2009_01-02_MKM-003-00_4x.ibg

I 01:13:46 Export Successfully Completed!

E 01:13:46 Operation Failed! - Duration: 00:11:06

I 01:13:46 Average Write Rate: 4,259 KB/s (3.1x) - Maximum Write Rate: 5,587 KB/s (4.0x)

Link to comment
Share on other sites

I 01:02:36 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 4x, 6x, 8x)

I 01:02:36 Write Speed: 4x

Have you tried burning at 6x or 8x? Where are those Verbatims made? It's printed on the packaging/box/spindle. It might also be worth trying a lens cleaning disc on that burner.

Link to comment
Share on other sites

One of our beta team members had the same problem with some he got from Maplin the other day - they were on sale, right? £20 for 25 or whatever?

 

I believe he was going to send his back too.

 

Yep those are the ones £20 for 25, made in India.

I did use AWS with similar results but will give burning at x6 a go as well.

 

Thanks for the replies,

 

John

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.