dallas8101 Posted October 12, 2009 Posted October 12, 2009 I use ImgBurn all the time, very successfully with single layer disks. I do not often use DL disks, but seem to have a lot of difficulty, not with writing, but with the verification. Th log (attached) shows: I 18:12:50 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3256863) I 18:12:50 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3256863) I 18:12:50 Verifying Layer 0... (LBA: 0 - 1628431) W 18:18:38 Failed to Read Sector 1130512 - Reason: Timeout on Logical Unit W 18:18:38 Sector 1130512 maps to File: \VIDEO_TS\VTS_02_1.VOB W 18:31:34 Retrying (1)... W 18:31:40 Retry Failed - Reason: Timeout on Logical Unit I have just finished trying a burn going from files and then from an image I created with ImgBurn. Both failed in the approximately the same place (visually the same, but I didn't save the earlier log). The disks seem to work, but the verification does not succeed.
mmalves Posted October 12, 2009 Posted October 12, 2009 It could be due to a lot of things, so post the whole log from that burn session (look in ImgBurn's Help menu).
dallas8101 Posted October 14, 2009 Author Posted October 14, 2009 It could be due to a lot of things, so post the whole log from that burn session (look in ImgBurn's Help menu). I had attached the log to the earlier message, but I don't see any way to access it now from the message board. I believe this was the the second burn attempt. The first attempt was already overwritten before I tried to get it. ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Sunday, 11 October 2009, 18:31:46 ; \\****************************************// ; ; I 17:08:20 ImgBurn Version 2.5.0.0 started! I 17:08:20 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 17:08:20 Total Physical Memory: 3,135,164 KB - Available: 1,318,972 KB W 17:08:20 Drive G:\ (FAT32) does not support single files > 4 GB in size. W 17:08:20 Drive J:\ (FAT32) does not support single files > 4 GB in size. I 17:08:20 Initialising SPTI... I 17:08:20 Searching for SCSI / ATAPI devices... I 17:08:23 Found 1 DVD-ROM and 2 DVD±RW/RAMs! I 17:09:02 Operation Started! I 17:09:02 Source File: C:\Users\pierson\Documents\test\10\10.MDS I 17:09:02 Source File Sectors: 3,256,864 (MODE1/2048) I 17:09:02 Source File Size: 6,670,057,472 bytes I 17:09:02 Source File Volume Identifier: SVCD2DVD I 17:09:02 Source File Volume Set Identifier: 3B4B88460031B21D I 17:09:02 Source File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER! I 17:09:02 Source File Implementation Identifier: ImgBurn I 17:09:02 Source File File System(s): ISO9660, UDF (1.02) I 17:09:02 Destination Device: [0:0:0] SONY DVD RW DRU-830A SS25 (I:) (USB) I 17:09:02 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 17:09:02 Destination Media Sectors: 4,173,824 I 17:09:02 Write Mode: DVD I 17:09:02 Write Type: DAO I 17:09:02 Write Speed: MAX I 17:09:02 Link Size: Auto I 17:09:02 Lock Volume: Yes I 17:09:02 Test Mode: No I 17:09:02 OPC: No I 17:09:02 BURN-Proof: Enabled I 17:09:02 Optimal L0 Data Zone Capacity: 1,628,432 I 17:09:02 Optimal L0 Data Zone Method: Copied From Original Disc W 17:56:39 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error W 17:56:39 Retrying (1)... I 17:56:56 Set L0 Data Zone Capacity Succeeded! I 17:56:57 Filling Buffer... (100 MB) I 17:57:00 Writing LeadIn... I 17:57:01 Writing Session 1 of 1... (1 Track, LBA: 0 - 3256863) I 17:57:01 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3256863) I 17:57:01 Writing Layer 0... (LBA: 0 - 1628431) I 18:04:20 Writing Layer 1... (LBA: 1628432 - 3256863) I 18:11:40 Synchronising Cache... I 18:11:43 Closing Track... I 18:11:44 Finalising Disc... I 18:12:15 Exporting Graph Data... I 18:12:15 Graph Data File: C:\Users\pierson\AppData\Roaming\ImgBurn\Graph Data Files\SONY_DVD_RW_DRU-830A_SS25_SUNDAY-OCTOBER-11-2009_5-09_PM_RICOHJPN-D01-67_MAX.ibg I 18:12:15 Export Successfully Completed! I 18:12:15 Operation Successfully Completed! - Duration: 01:03:13 I 18:12:15 Average Write Rate: 7,418 KB/s (5.4x) - Maximum Write Rate: 11,170 KB/s (8.1x) I 18:12:15 Cycling Tray before Verify... W 18:12:24 Waiting for device to become ready... I 18:12:49 Device Ready! I 18:12:50 Operation Started! I 18:12:50 Source Device: [0:0:0] SONY DVD RW DRU-830A SS25 (I:) (USB) I 18:12:50 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 18:12:50 Image File: C:\Users\pierson\Documents\test\10\10.MDS I 18:12:50 Image File Sectors: 3,256,864 (MODE1/2048) I 18:12:50 Image File Size: 6,670,057,472 bytes I 18:12:50 Image File Volume Identifier: SVCD2DVD I 18:12:50 Image File Volume Set Identifier: 3B4B88460031B21D I 18:12:50 Image File Application Identifier: IMGBURN V2.5.0.0 - THE ULTIMATE IMAGE BURNER! I 18:12:50 Image File Implementation Identifier: ImgBurn I 18:12:50 Image File File System(s): ISO9660, UDF (1.02) I 18:12:50 Read Speed (Data/Audio): MAX / MAX I 18:12:50 Hardware Read Error Retries: 2 I 18:12:50 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3256863) I 18:12:50 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3256863) I 18:12:50 Verifying Layer 0... (LBA: 0 - 1628431) W 18:18:38 Failed to Read Sector 1130512 - Reason: Timeout on Logical Unit W 18:18:38 Sector 1130512 maps to File: \VIDEO_TS\VTS_02_1.VOB W 18:31:34 Retrying (1)... W 18:31:40 Retry Failed - Reason: Timeout on Logical Unit E 18:31:42 Failed to Read Sector 1130512 - Reason: Timeout on Logical Unit E 18:31:42 Sector 1130512 maps to File: \VIDEO_TS\VTS_02_1.VOB E 18:31:43 Failed to Verify Sectors! I 18:31:43 Exporting Graph Data... I 18:31:43 Graph Data File: C:\Users\pierson\AppData\Roaming\ImgBurn\Graph Data Files\SONY_DVD_RW_DRU-830A_SS25_SUNDAY-OCTOBER-11-2009_5-09_PM_RICOHJPN-D01-67_MAX.ibg I 18:31:43 Export Successfully Completed! E 18:31:43 Operation Failed! - Duration: 00:18:52 I 18:31:43 Average Verify Rate: 1,997 KB/s (1.4x) - Maximum Verify Rate: 9,094 KB/s (6.6x) I 18:31:46 Close Request Acknowledged I 18:31:46 Closing Down... I 18:31:46 Shutting down SPTI... I 18:31:46 ImgBurn closed!
LIGHTNING UK! Posted October 14, 2009 Posted October 14, 2009 W 17:56:39 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error That's not a good sign. I 17:09:02 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x)... I 17:09:02 Write Speed: MAX 'MAX' = 8x. Try one of the other supported speeds.
dallas8101 Posted October 14, 2009 Author Posted October 14, 2009 (edited) W 17:56:39 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error That's not a good sign. I 17:09:02 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x)... I 17:09:02 Write Speed: MAX 'MAX' = 8x. Try one of the other supported speeds. I do occasionally get this message on all my drives (5 different ones). I don't know if its related to a particular batch of dvd's or not. Since it always passes when I click the try again, I was not sure it meant any fatal error, although I also don't truly understand what it means other than a calibration of some signal failed, and then passed on retry . Or does it only get one attempt and the retry just continues? When using the 4.7 dvd's the calibration error does not result in a verify error, at least as near as I can remember. I will try setting the max speed to 4 or 6 next time I try a DL. Thanks for the product, it has been very nice to use with SVD2DVD to author disks. Edited October 14, 2009 by dallas8101
dallas8101 Posted October 14, 2009 Author Posted October 14, 2009 I set it to 4.0x and it did complete OK, using the same iso file as before.
Recommended Posts