jtheod Posted October 14, 2009 Posted October 14, 2009 Purchased this computer a while ago. Made one CD with Ashampoo. Tried again, and get calibration error. Tried Nero and get Calibration error. Afterdawn advised I try you guys. Here is my log: I accidentally put a DVD into the tray instead of a CD on the first failure: I 16:43:33 ImgBurn Version 2.5.0.0 started! I 16:43:33 Microsoft Windows Vista Home Basic Edition (6.0, Build 6002 : Service Pack 2) I 16:43:33 Total Physical Memory: 2,085,328 KB - Available: 820,616 KB I 16:43:33 Initialising SPTI... I 16:43:33 Searching for SCSI / ATAPI devices... I 16:43:33 Found 1 DVD±RW/RAM! I 16:58:54 Operation Started! I 16:58:54 Device: [1:0:0] TSSTcorp DVD+-RW TS-H653F D300 (D:) (ATA) I 16:58:54 Media Type: DVD+RW (Disc ID: OPTODISC-OP1-01) (Speeds: 2.4x) I 16:58:54 Quick Erase: No I 16:58:54 Format Properly: Yes I 16:58:54 Format Size: Preferred I 16:58:54 Erasing Disc... I 17:24:14 Operation Successfully Completed! - Duration: 00:25:19 I 17:29:49 Operation Started! I 17:29:49 Source File: C:\Users\User\Desktop\.M0MMY'S MUSiC\Test for imgburn.cue I 17:29:49 Source File Sectors: 38,679 (AUDIO/2352) I 17:29:49 Source File Size: 90,973,008 bytes I 17:29:49 Source File File System(s): None I 17:29:49 Destination Device: [1:0:0] TSSTcorp DVD+-RW TS-H653F D300 (D:) (ATA) I 17:29:49 Destination Media Type: CD-R (Disc ID: 97m15s17f, Ritek Co.) (Speeds: 8x, 16x, 24x, 32x, 40x, 48x) I 17:29:49 Destination Media Sectors: 359,843 I 17:29:49 Write Mode: CD I 17:29:49 Write Type: SAO I 17:29:49 Write Speed: MAX I 17:29:49 Lock Volume: Yes I 17:29:49 Test Mode: No I 17:29:49 OPC: No I 17:29:49 BURN-Proof: Enabled I 17:29:50 Filling Buffer... (40 MB) I 17:29:53 Writing LeadIn... E 17:33:34 Failed to Write Sectors -150 - -124 - Reason: Power Calibration Area Error I 17:33:34 Writing Sectors... I 17:33:34 Synchronising Cache... E 17:33:40 Failed to Write Image! E 17:33:41 Operation Failed! - Duration: 00:03:51 I 17:33:41 Average Write Rate: N/A - Maximum Write Rate: N/A
mmalves Posted October 14, 2009 Posted October 14, 2009 I 17:29:49 Destination Device: [1:0:0] TSSTcorp DVD+-RW TS-H653F D300 (D:) (ATA)I 17:29:49 Destination Media Type: CD-R (Disc ID: 97m15s17f, Ritek Co.) (Speeds: 8x, 16x, 24x, 32x, 40x, 48x) I 17:29:49 Write Speed: MAX Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try burning at 16x or 24x.
jtheod Posted October 16, 2009 Author Posted October 16, 2009 Updated firmware, still no burn: I 19:23:30 ImgBurn Version 2.5.0.0 started! I 19:23:30 Microsoft Windows Vista Home Basic Edition (6.0, Build 6002 : Service Pack 2) I 19:23:30 Total Physical Memory: 2,085,328 KB - Available: 1,104,480 KB I 19:23:30 Initialising SPTI... I 19:23:30 Searching for SCSI / ATAPI devices... I 19:23:31 Found 1 DVD±RW/RAM! I 19:24:49 Operation Started! I 19:24:49 Source File: C:\Users\User\Desktop\.M0MMY'S MUSiC\Test for imgburn.cue I 19:24:49 Source File Sectors: 38,679 (AUDIO/2352) I 19:24:49 Source File Size: 90,973,008 bytes I 19:24:49 Source File File System(s): None I 19:24:49 Destination Device: [1:0:0] TSSTcorp DVD+-RW TS-H653F D400 (D:) (ATA) I 19:24:49 Destination Media Type: CD-R (Disc ID: 97m26s66f, CMC Magnetics Corp.) (Speeds: 8x, 16x, 24x, 32x, 40x, 48x) I 19:24:49 Destination Media Sectors: 359,844 I 19:24:49 Write Mode: CD I 19:24:49 Write Type: SAO I 19:24:49 Write Speed: 16x I 19:24:49 Lock Volume: Yes I 19:24:49 Test Mode: No I 19:24:49 OPC: No I 19:24:49 BURN-Proof: Enabled W 19:24:49 Write Speed Miscompare! - Wanted: 2,816 KB/s (16x), Got: 1,412 KB/s (8x) I 19:24:49 Filling Buffer... (40 MB) I 19:24:52 Writing LeadIn... E 19:28:06 Failed to Write Sectors -150 - -124 - Reason: Power Calibration Area Error I 19:28:06 Writing Sectors... I 19:28:06 Synchronising Cache... W 19:28:18 User opted to skip the 'Close Track/Session/Disc' functions. E 19:28:18 Failed to Write Image! E 19:28:18 Operation Failed! - Duration: 00:03:29
mmalves Posted October 16, 2009 Posted October 16, 2009 How old is that burner? Is it still under warranty? Could you try with Taiyo Yuden CD-Rs? It seems weird that it can't burn CDs, but then again I have a similar model of the same brand and it died for CD media a few months ago
jtheod Posted October 16, 2009 Author Posted October 16, 2009 I have no idea how old it is, but I will try the other discs you mentioned. Thanx!!
Recommended Posts