burje Posted October 16, 2009 Posted October 16, 2009 Hello, so I have just flashed my x-box360 to try and burn some games to it.. first I tried was Fifa10, failed at 50%, tried again, failed at the same spot. Tryed Dirt 2 after updating the firmware to the burner, great success ! So I went on and gave Overlord 2 a shoot, worked fine aswell. Then I attempted to burn Wanted, and have failed 3 times on that now, the same problem (i think) as with fifa. It starts great, goes to 50% and then says "Write error".. I have tried to burn it in both 2.4x and 4x. Someone that knows how to fix this or atlest why it fails ? Thx in advance! I'm Swedish so i apologize for bad grammar or spelling. Here is the log: I 16:12:22 ImgBurn Version 2.5.0.0 started! I 16:12:22 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7100) I 16:12:22 Total Physical Memory: 3 135 048 KB - Available: 2 069 328 KB I 16:12:22 Initialising SPTI... I 16:12:22 Searching for SCSI / ATAPI devices... I 16:12:22 Found 1 DVD-ROM and 1 DVD±RW/RAM! I 16:12:56 Operation Started! I 16:12:56 Source File: E:\Nya filer\Wanted_Weapons_of_Fate_RF_XBOX360-SuperX360\sx-wwofa.dvd I 16:12:56 Source File Sectors: 3 827 488 (MODE1/2048) I 16:12:56 Source File Size: 7 838 695 424 bytes I 16:12:56 Source File Volume Identifier: DVD_ROM I 16:12:56 Source File Volume Set Identifier: 356fc000MS UDFBridge I 16:12:56 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 16:12:56 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 16:12:56 Source File File System(s): ISO9660; UDF (1.50) I 16:12:56 Destination Device: [2:0:0] Optiarc DVD RW AD-7173S 1-03 (F:) (ATA) I 16:12:56 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2,4x; 4x; 6x; 8x) I 16:12:56 Destination Media Sectors: 4 173 824 I 16:12:56 Write Mode: DVD I 16:12:56 Write Type: DAO I 16:12:56 Write Speed: 4x I 16:12:56 Link Size: Auto I 16:12:56 Lock Volume: Yes I 16:12:56 Test Mode: No I 16:12:56 OPC: No I 16:12:56 BURN-Proof: Enabled I 16:12:56 Book Type Setting: DVD-ROM I 16:12:56 User Specified L0 Data Zone Capacity: 1 913 760 I 16:13:25 Set L0 Data Zone Capacity Succeeded! I 16:13:25 Filling Buffer... (40 MB) I 16:13:26 Writing LeadIn... I 16:13:27 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 16:13:27 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 16:13:27 Writing Layer 0... (LBA: 0 - 1913759) I 16:25:04 Writing Layer 1... (LBA: 1913760 - 3827487) W 16:25:42 Failed to Write Sectors 1914240 - 1914271 - Reason: Power Calibration Area Error W 16:25:42 Retrying (1 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (2 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (3 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (4 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (5 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (6 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (7 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (8 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (9 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (10 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (11 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:42 Retrying (12 of 20)... W 16:25:42 Retry Failed - Reason: Write Error W 16:25:43 Retrying (13 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:25:43 Retrying (14 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:25:43 Retrying (15 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:25:43 Retrying (16 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:25:43 Retrying (17 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:25:43 Retrying (18 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:25:43 Retrying (19 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:25:43 Retrying (20 of 20)... W 16:25:43 Retry Failed - Reason: Write Error W 16:36:08 Retrying (21)... W 16:36:08 Retry Failed - Reason: Write Error W 16:36:09 Retrying (22)... W 16:36:09 Retry Failed - Reason: Write Error E 16:36:15 Failed to Write Sectors 1914240 - 1914271 - Reason: Power Calibration Area Error I 16:36:15 Synchronising Cache... W 16:36:20 User opted to skip the 'Close Track/Session/Disc' functions. E 16:36:20 Failed to Write Image! I 16:36:20 Exporting Graph Data... I 16:36:20 Graph Data File: C:\Users\Berge\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7173S_1-03_DEN-15-OKTOBER-2009_16-12_MKM-003-00_4x.ibg I 16:36:20 Export Successfully Completed! E 16:36:20 Operation Failed! - Duration: 00:23:24 I 16:36:20 Average Write Rate: 2 800 KB/s (2.0x) - Maximum Write Rate: 5 774 KB/s (4.2x)
LIGHTNING UK! Posted October 16, 2009 Posted October 16, 2009 If 2.4x and 4x have failed, try 6x and 8x. You could also try cleaning your drive with a cleaning disc. Have you tried some discs from a different spindle? Maybe your one is a bit iffy?
burje Posted October 16, 2009 Author Posted October 16, 2009 (edited) I guess I'll try a different spindle in 6 and 8x speed then ! Gonna pick up a cleaning disc later today and give it a go.. thx for the awnser! Edited October 16, 2009 by burje
burje Posted October 16, 2009 Author Posted October 16, 2009 It worked at 8x speed.. why !? >.< If you could explaine it to me..
LIGHTNING UK! Posted October 16, 2009 Posted October 16, 2009 They're 8x discs and I guess that's the speed your drive likes burning them at the most. That's not to say it should fail at the other speeds, but obviously it was/did.
burje Posted October 16, 2009 Author Posted October 16, 2009 Thank you so much anyway! And thanks for a great program! keep it up and cya
Recommended Posts