jak skrilla Posted October 17, 2009 Posted October 17, 2009 buffer bar wasn't buffing.......i restarted computer after i enabled DMA......i followed a tutorial..........then buffer bar maxed out on buffing for like two minutes........then quit buffering............now it won't even buffer...........am i doing something wrong.....pleas help
LIGHTNING UK! Posted October 17, 2009 Posted October 17, 2009 What are you actually doing? Which buffer bar never changes, 'Device Buffer' or just 'Buffer'? Post a log please.
jak skrilla Posted October 18, 2009 Author Posted October 18, 2009 What are you actually doing? Which buffer bar never changes, 'Device Buffer' or just 'Buffer'? Post a log please. i copying a burned dvd-r...so i can burn it onto another dvd-r......i'm i going about it the wrong way........when copying the dvd-r there is only one buffer and it stays blank the whole time...................................................................................................... here is my log from when i copied the dvd-r I 21:04:06 Operation Started! I 21:04:06 Source Device: [0:0:0] Optiarc DVD RW AD-7560A DH10 (E:) (ATA) I 21:04:06 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: RITEKF1) (Speeds: 2x, 4x, 6x, 8x) I 21:04:06 Source Media Sectors: 725,344 (Track Path: PTP) I 21:04:06 Source Media Size: 1,485,504,512 bytes I 21:04:06 Source Media Volume Identifier: My DVD I 21:04:06 Source Media Volume Set Identifier: 3B3A22A8________My DVD I 21:04:06 Source Media Implementation Identifier: VsoSoftware I 21:04:06 Source Media File System(s): ISO9660, UDF (1.02) I 21:04:06 Read Speed (Data/Audio): MAX / 8x I 21:04:06 Destination File: C:\My DVD.iso I 21:04:06 Destination Free Space: 15,418,503,168 Bytes (15,057,132 KB) (14,704 MB) (14 GB) I 21:04:06 Destination File System: NTFS I 21:04:06 File Splitting: Auto I 21:04:07 Reading Session 1 of 1... (1 Track, LBA: 0 - 725343) I 21:04:07 Reading Track 1 of 1... (MODE1/2048, LBA: 0 - 725343) I 21:08:05 Exporting Graph Data... I 21:08:05 Graph Data File: C:\Documents and Settings\JASON SMITH.JASON\Application Data\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7560A_DH10_SUNDAY-OCTOBER-18-2009_9-04_PM_RITEKF1.ibg I 21:08:05 Export Successfully Completed! I 21:08:05 Operation Successfully Completed! - Duration: 00:03:58 I 21:08:05 Average Read Rate: 6,095 KB/s (4.4x) - Maximum Read Rate: 7,850 KB/s (5.7x) here is the log from when i burned the movie with imgburn.......the buffer and device buffer were at 100% the whole time............. I 21:18:41 Operation Started! I 21:18:41 Source File: C:\My DVD.iso I 21:18:41 Source File Sectors: 725,344 (MODE1/2048) I 21:18:41 Source File Size: 1,485,504,512 bytes I 21:18:41 Source File Volume Identifier: My DVD I 21:18:41 Source File Volume Set Identifier: 3B3A22A8________My DVD I 21:18:41 Source File Implementation Identifier: VsoSoftware I 21:18:41 Source File File System(s): ISO9660, UDF (1.02) I 21:18:41 Destination Device: [0:0:0] Optiarc DVD RW AD-7560A DH10 (E:) (ATA) I 21:18:41 Destination Media Type: DVD-R (Disc ID: SONY16D1) (Speeds: 2x, 4x, 6x, 8x) I 21:18:41 Destination Media Sectors: 2,297,888 I 21:18:41 Write Mode: DVD I 21:18:41 Write Type: DAO I 21:18:41 Write Speed: MAX I 21:18:41 Link Size: Auto I 21:18:41 Lock Volume: Yes I 21:18:41 Test Mode: No I 21:18:41 OPC: No I 21:18:41 BURN-Proof: Enabled I 21:18:41 Filling Buffer... (40 MB) I 21:18:43 Writing LeadIn... I 21:19:39 Writing Session 1 of 1... (1 Track, LBA: 0 - 725343) I 21:19:39 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 725343) W 21:25:22 Waiting for buffers to recover... (LBA: 657728) W 21:25:28 Waiting for hard disk activity to reach threshold level... I 21:25:29 Writing Sectors... I 21:25:56 Synchronising Cache... I 21:26:27 Exporting Graph Data... I 21:26:27 Graph Data File: C:\Documents and Settings\JASON SMITH.JASON\Application Data\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7560A_DH10_SUNDAY-OCTOBER-18-2009_9-18_PM_SONY16D1_MAX.ibg I 21:26:27 Export Successfully Completed! I 21:26:27 Operation Successfully Completed! - Duration: 00:07:45 I 21:26:27 Average Write Rate: 3,847 KB/s (2.8x) - Maximum Write Rate: 5,645 KB/s (4.1x) I 21:26:27 Cycling Tray before Verify... W 21:26:45 Waiting for device to become ready... I 21:26:56 Device Ready! I 21:26:56 Operation Started! I 21:26:56 Source Device: [0:0:0] Optiarc DVD RW AD-7560A DH10 (E:) (ATA) I 21:26:56 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: SONY16D1) (Speeds: 2x, 4x, 6x, 8x) I 21:26:56 Image File: C:\My DVD.iso I 21:26:56 Image File Sectors: 725,344 (MODE1/2048) I 21:26:56 Image File Size: 1,485,504,512 bytes I 21:26:56 Image File Volume Identifier: My DVD I 21:26:56 Image File Volume Set Identifier: 3B3A22A8________My DVD I 21:26:56 Image File Implementation Identifier: VsoSoftware I 21:26:56 Image File File System(s): ISO9660, UDF (1.02) I 21:26:56 Read Speed (Data/Audio): MAX / MAX I 21:26:57 Verifying Session 1 of 1... (1 Track, LBA: 0 - 725343) I 21:26:57 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 725343) does it have to buffer when u copy?
mmalves Posted October 18, 2009 Posted October 18, 2009 Please post the complete log of the burn as the piece you posted is missing some important information.
jak skrilla Posted October 18, 2009 Author Posted October 18, 2009 Please post the complete log of the burn as the piece you posted is missing some important information. that was the complete log........i went ahead and burned the dvd anyways.....even though it didn't buffer when i copied it....is it suppose to buffer when u copy it? i then went ahead and burned it and the buffers were at a 100%........that was the log that i got after i burned it........i can't get the log anymore.......i get a message on the bottom of imgburn that says..........Device not Ready (Logical unit not ready, Long write in progress)........it won't let me do anything now......do u know what this is?
LIGHTNING UK! Posted October 18, 2009 Posted October 18, 2009 No, it's not supposed to buffer when you 'Read' a disc, only when you 'Write' it.
Recommended Posts