JustinB Posted October 21, 2009 Posted October 21, 2009 I 21:53:57 ImgBurn Version 2.5.0.0 started! I 21:53:57 Microsoft Windows 7 Enterprise Edition (6.1, Build 7600) I 21:53:57 Total Physical Memory: 523,832 KB - Available: 69,756 KB I 21:53:58 Initialising SPTI... I 21:53:58 Searching for SCSI / ATAPI devices... I 21:53:58 Found 1 DVD-ROM/CD-RW and 1 DVD±RW! I 21:58:56 Operation Started! I 21:58:56 Device: [1:1:0] SONY DVD RW DRU-510A 1.0f (E:) (ATA) I 21:58:56 Media Type: DVD+RW (Disc ID: INFODISC-A10-01) (Speeds: 2.4x, 4x) I 21:58:56 Quick Erase: No I 21:58:56 Format Properly: Yes I 21:58:56 Format Size: Preferred I 21:58:56 Erasing Disc... W 21:59:19 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/5) - Power Calibration Area Error E 21:59:23 Failed to Erase Disc! - Reason: Power Calibration Area Error E 21:59:23 Operation Failed! - Duration: 00:00:27
mmalves Posted October 21, 2009 Posted October 21, 2009 I 21:58:56 Device: [1:1:0] SONY DVD RW DRU-510A 1.0f (E:) (ATA)I 21:58:56 Media Type: DVD+RW (Disc ID: INFODISC-A10-01) (Speeds: 2.4x, 4x) Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again. You know that you only need to format it once, right? After that just overwrite the disc
JustinB Posted October 21, 2009 Author Posted October 21, 2009 I 21:58:56 Device: [1:1:0] SONY DVD RW DRU-510A 1.0f (E:) (ATA)I 21:58:56 Media Type: DVD+RW (Disc ID: INFODISC-A10-01) (Speeds: 2.4x, 4x) Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again. You know that you only need to format it once, right? After that just overwrite the disc i did that. No change
mmalves Posted October 21, 2009 Posted October 21, 2009 Then you'll need to try with other rewritables (Verbatim highly recommended) until you find one that your burner likes. You might be able to use the disc you have with a newer burner
Recommended Posts