ju1ceb4g Posted October 27, 2009 Posted October 27, 2009 Was just wondering if disabling STPD would make performance that much greater and I had a DVD-DL that failed verification, but reads successfully. Could I possibly run into problems with this later?
Cynthia Posted October 27, 2009 Posted October 27, 2009 Hi and welcome to the forum, ju1ceb4g! Usually issues with that driver is that you can't get max reading speed. The issue you describe sounds not related to STPD. More like issues with firmware/media quality/burner quality.
ju1ceb4g Posted October 28, 2009 Author Posted October 28, 2009 Hi and welcome to the forum, ju1ceb4g! Usually issues with that driver is that you can't get max reading speed. The issue you describe sounds not related to STPD. More like issues with firmware/media quality/burner quality. my disk didn't verify correctly but runs properly. should I burn another copy? is what I was trying to say. Thanks Cynthia for the welcome and the response :]
Cynthia Posted October 28, 2009 Posted October 28, 2009 Might be that the verify error was not in the main movie and that's why you have encountered it. The log should say which part it was in.
ju1ceb4g Posted October 28, 2009 Author Posted October 28, 2009 (edited) Might be that the verify error was not in the main movie and that's why you have encountered it. The log should say which part it was in. I 13:34:46 Device Ready! I 13:34:47 Operation Started! I 13:34:47 Source Device: [0:0:0] BENQ DVD DD DW1640 BSRB (D:) (ATA) I 13:34:47 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 2.4x, 4x, 8x) I 13:34:47 Image File: C:\x\ccclx-fnr4.dvd I 13:34:47 Image File Sectors: 3,827,488 (MODE1/2048) I 13:34:47 Image File Size: 7,838,695,424 bytes I 13:34:47 Image File Volume Identifier: DVD_ROM I 13:34:47 Image File Volume Set Identifier: 356fc000MS UDFBridge I 13:34:47 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 13:34:47 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 13:34:47 Image File File System(s): ISO9660, UDF (1.50) I 13:34:47 Read Speed (Data/Audio): MAX / MAX I 13:34:47 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 13:34:47 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 13:34:47 Verifying Layer 0... (LBA: 0 - 1913759) I 13:40:33 Verifying Layer 1... (LBA: 1913760 - 3827487) W 13:45:46 Failed to Read Sector 3692672 - Reason: Unrecovered Read Error W 13:59:20 Retrying (1)... W 13:59:27 Retry Failed - Reason: Unrecovered Read Error W 13:59:34 Failed to Read Sector 3692672 - Reason: Unrecovered Read Error W 13:59:40 Failed to Read Sector 3692674 - Reason: Unrecovered Read Error E 13:59:40 Failed to Read Sector 3692674 - Reason: Unrecovered Read Error E 13:59:40 Miscompare at LBA: 3692673, Offset: 0 E 13:59:40 Device: 0xAE E 13:59:40 Image File: 0x1E E 13:59:40 Total Errors in Sector: 2,040 E 13:59:40 Failed to Verify Sectors! I 13:59:40 Exporting Graph Data... I 13:59:40 Graph Data File: C:\Users\Kent\AppData\Roaming\ImgBurn\Graph Data Files\BENQ_DVD_DD_DW1640_BSRB_FRIDAY-OCTOBER-23-2009_1-19_PM_MKM-001-00_MAX.ibg I 13:59:40 Export Successfully Completed! E 13:59:40 Operation Failed! - Duration: 00:24:52 I 13:59:40 Average Verify Rate: 4,953 KB/s (3.6x) - Maximum Verify Rate: 16,180 KB/s (11.7x) So I guess that's a yes to the re-burn LOL Edited October 28, 2009 by ju1ceb4g
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now