scrokk Posted October 30, 2009 Posted October 30, 2009 (edited) Hello I have a problem, I burned a .dvd image to my dvd+dl but when I put it into my xbox it find it as a movie, why???? that's the log... I 21:53:32 ImgBurn Version 2.5.0.0 started! I 21:53:32 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2) I 21:53:32 Total Physical Memory: 1.048.048 KB - Available: 443.448 KB W 21:53:32 SPTD can have a detrimental effect on drive performance. I 21:53:32 Initialising SPTI... I 21:53:32 Searching for SCSI / ATAPI devices... I 21:53:35 Found 1 DVD±RW and 1 DVD±RW/RAM! I 21:54:11 Operation Started! I 21:54:11 Source File: D:\...\gtae.dvd I 21:54:11 Source File Sectors: 3.827.488 (MODE1/2048) I 21:54:11 Source File Size: 7.838.695.424 bytes I 21:54:11 Source File Volume Identifier: DVD_ROM I 21:54:11 Source File Volume Set Identifier: fd244000MS UDFBridge I 21:54:11 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 21:54:11 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 21:54:11 Source File File System(s): ISO9660; UDF (1.50) I 21:54:11 Destination Device: [0:0:0] TSSTcorp CDDVDW SE-S084C TS01 (F:) (USB) I 21:54:11 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 3x; 4x; 6x) I 21:54:12 Destination Media Sectors: 4.173.824 I 21:54:12 Write Mode: DVD I 21:54:12 Write Type: DAO I 21:54:12 Write Speed: 3x I 21:54:12 Link Size: Auto I 21:54:12 Lock Volume: Yes I 21:54:12 Test Mode: No I 21:54:12 OPC: No I 21:54:12 BURN-Proof: Enabled I 21:54:12 Book Type Setting: DVD-ROM I 21:54:12 User Specified L0 Data Zone Capacity: 1.913.760 I 21:55:05 Set L0 Data Zone Capacity Succeeded! I 21:55:13 Filling Buffer... (40 MB) I 21:55:15 Writing LeadIn... I 21:55:17 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 21:55:17 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 21:55:17 Writing Layer 0... (LBA: 0 - 1913759) I 22:10:55 Writing Layer 1... (LBA: 1913760 - 3827487) I 22:27:13 Synchronising Cache... I 22:27:16 Closing Track... I 22:27:18 Finalising Disc... I 22:28:03 Exporting Graph Data... I 22:28:03 Graph Data File: D:\...\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SE-S084C_TS01_FRIDAY-30-OCTOBER-2009_21-54_RICOHJPN-D01-67_3x.ibg I 22:28:03 Export Successfully Completed! I 22:28:03 Operation Successfully Completed! - Duration: 00:33:51 I 22:28:03 Average Write Rate: 3.995 KB/s (2.9x) - Maximum Write Rate: 4.276 KB/s (3.1x) I 22:35:26 Close Request Acknowledged I 22:35:26 Closing Down... I 22:35:34 Shutting down SPTI... I 22:35:34 ImgBurn closed! Should I change the dvds? thanks Edited October 30, 2009 by scrokk
mmalves Posted October 30, 2009 Posted October 30, 2009 Use the Verify mode to check the disc against that same .dvd file, and next time leave Verify enabled. If it verifies successfully then read this -> http://forum.imgburn.com/index.php?showtopic=12200
Recommended Posts