dvd file xbox movie

[scrokk]

Hello I have a problem, I burned a .dvd image to my dvd+dl but when I put it into my xbox it find it as a movie, why????

 

 

that's the log...

 

I 21:53:32 ImgBurn Version 2.5.0.0 started!
I 21:53:32 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)
I 21:53:32 Total Physical Memory: 1.048.048 KB  -  Available: 443.448 KB
W 21:53:32 SPTD can have a detrimental effect on drive performance.
I 21:53:32 Initialising SPTI...
I 21:53:32 Searching for SCSI / ATAPI devices...
I 21:53:35 Found 1 DVD±RW and 1 DVD±RW/RAM!
I 21:54:11 Operation Started!
I 21:54:11 Source File: D:\...\gtae.dvd
I 21:54:11 Source File Sectors: 3.827.488 (MODE1/2048)
I 21:54:11 Source File Size: 7.838.695.424 bytes
I 21:54:11 Source File Volume Identifier: DVD_ROM
I 21:54:11 Source File Volume Set Identifier: fd244000MS UDFBridge
I 21:54:11 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 21:54:11 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 21:54:11 Source File File System(s): ISO9660; UDF (1.50)
I 21:54:11 Destination Device: [0:0:0] TSSTcorp CDDVDW SE-S084C TS01 (F:) (USB)
I 21:54:11 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 3x; 4x; 6x)
I 21:54:12 Destination Media Sectors: 4.173.824
I 21:54:12 Write Mode: DVD
I 21:54:12 Write Type: DAO
I 21:54:12 Write Speed: 3x
I 21:54:12 Link Size: Auto
I 21:54:12 Lock Volume: Yes
I 21:54:12 Test Mode: No
I 21:54:12 OPC: No
I 21:54:12 BURN-Proof: Enabled
I 21:54:12 Book Type Setting: DVD-ROM
I 21:54:12 User Specified L0 Data Zone Capacity: 1.913.760
I 21:55:05 Set L0 Data Zone Capacity Succeeded!
I 21:55:13 Filling Buffer... (40 MB)
I 21:55:15 Writing LeadIn...
I 21:55:17 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)
I 21:55:17 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)
I 21:55:17 Writing Layer 0... (LBA: 0 - 1913759)
I 22:10:55 Writing Layer 1... (LBA: 1913760 - 3827487)
I 22:27:13 Synchronising Cache...
I 22:27:16 Closing Track...
I 22:27:18 Finalising Disc...
I 22:28:03 Exporting Graph Data...
I 22:28:03 Graph Data File: D:\...\Application Data\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SE-S084C_TS01_FRIDAY-30-OCTOBER-2009_21-54_RICOHJPN-D01-67_3x.ibg
I 22:28:03 Export Successfully Completed!
I 22:28:03 Operation Successfully Completed! - Duration: 00:33:51
I 22:28:03 Average Write Rate: 3.995 KB/s (2.9x) - Maximum Write Rate: 4.276 KB/s (3.1x)
I 22:35:26 Close Request Acknowledged
I 22:35:26 Closing Down...
I 22:35:34 Shutting down SPTI...
I 22:35:34 ImgBurn closed!

 

Should I change the dvds? thanks

Edited October 30, 2009 by scrokk

[mmalves]

Use the Verify mode to check the disc against that same .dvd file, and next time leave Verify enabled.

 

If it verifies successfully then read this -> http://forum.imgburn.com/index.php?showtopic=12200