DVD Burning problem, buffer auto. goes to 100%

everyone82 · November 2, 2009

Hello. I own a somewhat older dvd burner, but never had nay problems before. I was told verbatim disks were pretty good so recently picked up a spindle on ebay. I now get an error with imgburn and cant seem to get an .iso image files or anything to burn correctly. I figured it's the disks but not 100% sure. Don't see why they would not work. Really don't wanna go buy another 100 discs and toss these for no reason. I get this error every time.....

First off this is the info once I put the disk into the burner(hp dvd writer dvd630e):

HP DVD Writer 630c CH16 (USB)

Current Profile: DVD-R

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2,298,496

Free Space: 4,707,319,808 bytes

Free Time: 510:48:46 (MM:SS:FF)

Supported Write Speeds: 2.4x, 4x, 8x

Pre-recorded Information:

Manufacturer ID: MCC 03RG20

Physical Format Information (Last Recorded):

Book Type: DVD-R

Part Version: 5

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196,608

Last Physical Sector of Data Area: 0

Last Physical Sector in Layer 0: 0

Performance (Write Speed):

Descriptor 1...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2298495 (0x0023127F)

-> RS: 4,787 KB/s (3.5x) - WS: 3,324 KB/s (2.4x)

Descriptor 2...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2298495 (0x0023127F)

-> RS: 4,787 KB/s (3.5x) - WS: 5,540 KB/s (4x)

Descriptor 3...

-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00

-> EL: 2298495 (0x0023127F)

-> RS: 4,787 KB/s (3.5x) - WS: 11,080 KB/s (8x)

This is the Log info:

I 01:10:24 Operation Started!

I 01:10:24 Source File: H:\test.img

I 01:10:24 Source File Sectors: 2,280,953 (MODE1/2048)

I 01:10:24 Source File Size: 4,671,391,744 bytes

I 01:10:24 Source File Volume Identifier: UP

I 01:10:24 Source File Volume Set Identifier: 4AED11760000001E

I 01:10:24 Source File Implementation Identifier: mkisofs

I 01:10:24 Source File File System(s): ISO9660, UDF (1.02)

I 01:10:24 Destination Device: [0:0:0] HP DVD Writer 630c CH16 (D:) (USB)

I 01:10:24 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 2.4x, 4x, 8x)

I 01:10:24 Destination Media Sectors: 2,298,496

I 01:10:24 Write Mode: DVD

I 01:10:25 Write Type: DAO

I 01:10:25 Write Speed: 2.4x

I 01:10:25 Link Size: Auto

I 01:10:25 Lock Volume: Yes

I 01:10:25 Test Mode: No

I 01:10:25 OPC: No

I 01:10:25 BURN-Proof: Enabled

I 01:10:26 Filling Buffer... (20 MB)

I 01:10:27 Writing LeadIn...

W 01:10:49 Failed to Write Sectors 0 - 31 - Reason: Write Error

W 01:10:49 Retrying (1 of 20)...

W 01:10:49 Retry Failed - Reason: Invalid Address For Write

W 01:10:49 Retrying (2 of 20)...

W 01:10:49 Retry Failed - Reason: Invalid Address For Write

W 01:10:49 Retrying (3 of 20)...

W 01:10:50 Retry Failed - Reason: Invalid Address For Write

W 01:10:50 Retrying (4 of 20)...

W 01:10:50 Retry Failed - Reason: Invalid Address For Write

W 01:10:50 Retrying (5 of 20)...

W 01:10:50 Retry Failed - Reason: Invalid Address For Write

W 01:10:50 Retrying (6 of 20)...

W 01:10:50 Retry Failed - Reason: Invalid Address For Write

W 01:10:50 Retrying (7 of 20)...

W 01:10:50 Retry Failed - Reason: Invalid Address For Write

W 01:10:50 Retrying (8 of 20)...

W 01:10:50 Retry Failed - Reason: Invalid Address For Write

W 01:10:50 Retrying (9 of 20)...

W 01:10:50 Retry Failed - Reason: Invalid Address For Write

W 01:10:50 Retrying (10 of 20)...

W 01:10:50 Retry Failed - Reason: Invalid Address For Write

W 01:10:50 Retrying (11 of 20)...