HooVer Posted November 2, 2009 Posted November 2, 2009 ive tried everything guys/gals, and i cant seem to get it right, can someone help me with this problem.....Log attatched, ill be extremely greatful, and thank you VERY much in advance! And for the record, it says write speed max, it will do the same thing at (2.4x, 4x, 8x,...etc), just shows max on the log !!! ; ImgBurn Version 2.5.0.0 - Log ; Friday, 23 October 2009, 00:57:56 ; \\****************************************// ; ; I 23:53:05 ImgBurn Version 2.5.0.0 started! I 23:53:05 Microsoft Windows XP Tablet PC Edition (5.1, Build 2600 : Service Pack 3) I 23:53:05 Total Physical Memory: 2,085,992 KB - Available: 1,474,324 KB I 23:53:05 Initialising SPTI... I 23:53:05 Searching for SCSI / ATAPI devices... I 23:53:05 Found 1 DVD±RW and 1 DVD±RW/RAM! I 23:53:24 Operation Started! I 23:53:24 Source File: C:\Users\Cody Hoover\Desktop\all-fm3a.dvd I 23:53:24 Source File Sectors: 3,827,488 (MODE1/2048) I 23:53:24 Source File Size: 7,838,695,424 bytes I 23:53:24 Source File Volume Identifier: DVD_ROM I 23:53:24 Source File Volume Set Identifier: 356fc000MS UDFBridge I 23:53:24 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 23:53:24 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 23:53:24 Source File File System(s): ISO9660, UDF (1.50) I 23:53:24 Destination Device: [1:0:0] HL-DT-ST DVDRAM GH22NS50 TN01 (D:) (ATA) I 23:53:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x) I 23:53:24 Destination Media Sectors: 4,173,824 I 23:53:24 Write Mode: DVD I 23:53:24 Write Type: DAO I 23:53:24 Write Speed: MAX I 23:53:24 Link Size: Auto I 23:53:24 Lock Volume: Yes I 23:53:24 Test Mode: No I 23:53:24 OPC: No I 23:53:24 BURN-Proof: Enabled I 23:53:25 Book Type Setting: DVD-ROM I 23:53:25 Optimal L0 Data Zone Capacity: 1,913,760 I 23:53:25 Optimal L0 Data Zone Method: Copied From Original Disc I 23:54:33 Set L0 Data Zone Capacity Succeeded! I 23:54:33 Filling Buffer... (40 MB) I 23:54:34 Writing LeadIn... I 23:55:59 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 23:55:59 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 23:55:59 Writing Layer 0... (LBA: 0 - 1913759) I 00:07:56 Writing Layer 1... (LBA: 1913760 - 3827487) I 00:26:18 Synchronising Cache... I 00:26:19 Closing Track... I 00:28:21 Finalising Disc... W 00:32:13 Potential 'WaitImmediateIO' Deferred Error - (66%, 0/3) - No Seek Complete W 00:32:13 Finalise Disc Failed! - Reason: No Seek Complete W 00:32:13 Retrying (1 of 3)... I 00:32:22 Exporting Graph Data... I 00:32:22 Graph Data File: C:\Users\Cody Hoover\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GH22NS50_TN01_OCTOBER-22-2009_11-53_PM_RICOHJPN-D01-67_MAX.ibg I 00:32:22 Export Successfully Completed! I 00:32:22 Operation Successfully Completed! - Duration: 00:38:57 I 00:32:22 Average Write Rate: 4,210 KB/s (3.0x) - Maximum Write Rate: 5,610 KB/s (4.1x) I 00:57:55 Close Request Acknowledged I 00:57:55 Closing Down... I 00:57:56 Shutting down SPTI... I 00:57:56 ImgBurn closed! ;
LIGHTNING UK! Posted November 2, 2009 Posted November 2, 2009 If it fails on every 'supported' speed, give up using those discs (or that drive). You could try a cleaning disc but I doubt the drive would need it as it's not an old model.
jeff_nz Posted November 2, 2009 Posted November 2, 2009 I 23:53:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x) You're probably only ever likely to get hit or miss results at best with those discs I'm sorry to say. Ricoh use a manufacturing process called Inverted Stack to make their double layer discs and it appears that even today they're not well supported by most burners. For the best chance of success read the sticky post at the beginning of this forum.
Recommended Posts