ImgBurn hangs at "Setting L0 Data Zone Capacity"

Jaxyl · November 6, 2009

ImgBurn is currently hanging at "Setting L0 Data Zone Capacity" and it requires a reboot of the computer to close the program and get my disc back.

I'm currently running Windows 7 through Bootcamp if that helps.

I 01:28:33 ImgBurn Version 2.5.0.0 started!

I 01:28:33 Microsoft Windows 7 Ultimate Edition (6.1, Build 7600)

I 01:28:33 Total Physical Memory: 3,120,956 KB - Available: 2,505,468 KB

I 01:28:33 Initialising SPTI...

I 01:28:34 Searching for SCSI / ATAPI devices...

I 01:28:34 Found 1 DVD±RW!

I 01:30:55 Operation Started!

I 01:30:55 Source File: C:\Users\XXXXXXX\Downloads\XXXXXXX\XXXXXXXX\XXXXX.dvd

I 01:30:55 Source File Sectors: 3,697,696 (MODE1/2048)

I 01:30:55 Source File Size: 7,572,881,408 bytes

I 01:30:55 Source File Volume Identifier: DVD_ROM

I 01:30:55 Source File Volume Set Identifier: fd244000MS UDFBridge

I 01:30:55 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 01:30:56 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 01:30:56 Source File File System(s): ISO9660, UDF (1.50)

I 01:30:56 Destination Device: [1:0:0] MATSHITA DVD-R UJ-868 KA14 (D:) (ATA)

I 01:30:56 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x)

I 01:30:56 Destination Media Sectors: 4,173,824

I 01:30:56 Write Mode: DVD

I 01:30:56 Write Type: DAO

I 01:30:56 Write Speed: MAX

I 01:30:56 Link Size: Auto

I 01:30:56 Lock Volume: Yes

I 01:30:56 Test Mode: No

I 01:30:56 OPC: No

I 01:30:56 BURN-Proof: Enabled

I 01:30:56 Optimal L0 Data Zone Capacity: 1,913,760

I 01:30:56 Optimal L0 Data Zone Method: Copied From Original Disc

**mmalves** · November 6, 2009

Look for updated IDE drivers for your motherboard's chipset and/or IDE/SATA controller (use SIW to find out brand/model).

Recommended Posts