Gillie2005 Posted November 11, 2009 Posted November 11, 2009 Ok I am quite new to this but I have burnt five bd-r now of two different blu ray movie back ups which were both under 25GB. So I just used AnyDVD HD to Rip Video DVD to Harddisk. Then I copied the BDMV and Certificate folders into ImgBurn. The resulting back ups will play on Power DVD but not on my PS3. I get the "Invalid Disc Error". I had the Verify option selected and I have tried UDF 2.5 and 2.6 but still no change. Do you think it might be the Ritek media I am using. (Hope not as I bought 50 ) I will try a different media when I can order some but was just wondering if anyone could see an obvious issue from the below. PS3 40GB (latest update) Blu Ray Drive: LG BH08LS20 (latest firmware V2.0) Media: Ritek Full Face Printable 8x 25GB Disc Information: Status: Empty Erasable: No Free Sectors: 12,219,392 Free Space: 25,025,314,816 bytes Free Time: 2715:27:17 (MM:SS:FF) Supported Write Speeds: 2x, 4x, 6x, 8x BD Disc Information: Disc ID: RITEK-BR2-00 Disc Type: BD-R AnyDVD HD 6.5.9.5 ImgBurn 2.5.0.0 ImgBurn Log: I 23:37:12 ImgBurn Version 2.5.0.0 started! I 23:37:12 Microsoft Windows Vista Business Edition (6.0, Build 6000) I 23:37:12 Total Physical Memory: 3,406,208 KB - Available: 1,877,160 KB W 23:37:12 SPTD can have a detrimental effect on drive performance. I 23:37:12 Initialising SPTI... I 23:37:12 Searching for SCSI / ATAPI devices... I 23:37:12 Found 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 23:38:34 Operation Started! I 23:38:34 Building Image Tree... I 23:38:36 Calculating Totals... I 23:38:36 Preparing Image... I 23:38:36 Contents: 88 Files, 17 Folders I 23:38:36 Content Type: BD Video I 23:38:36 Data Type: MODE1/2048 I 23:38:36 File System(s): UDF (2.60) I 23:38:36 Volume Label: CASS I 23:38:36 Size: 22,907,012,872 bytes I 23:38:36 Sectors: 11,185,120 I 23:38:36 Image Size: 22,908,436,480 bytes I 23:38:36 Image Sectors: 11,185,760 I 23:38:38 Operation Successfully Completed! - Duration: 00:00:03 I 23:38:38 Operation Started! I 23:38:38 Source File: -==/\/[bUILD IMAGE]\/\==- I 23:38:38 Source File Sectors: 11,185,760 (MODE1/2048) I 23:38:38 Source File Size: 22,908,436,480 bytes I 23:38:38 Source File Volume Identifier: CASS I 23:38:38 Source File Application Identifier: ImgBurn v2.5.0.0 I 23:38:38 Source File Implementation Identifier: ImgBurn I 23:38:38 Source File File System(s): UDF (2.60) I 23:38:38 Destination Device: [0:1:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (ATA) I 23:38:38 Destination Media Type: BD-R (Disc ID: RITEK-BR2-00) (Speeds: 2x, 4x, 6x, 8x) I 23:38:38 Destination Media Sectors: 12,219,392 I 23:38:38 Write Mode: BD I 23:38:38 Write Type: DAO I 23:38:38 Write Speed: MAX I 23:38:38 BD-R Verify Not Required: Yes I 23:38:38 Link Size: Auto I 23:38:38 Lock Volume: Yes I 23:38:38 Test Mode: No I 23:38:38 OPC: No I 23:38:38 BURN-Proof: Enabled I 23:38:52 Filling Buffer... (40 MB) I 23:38:53 Writing LeadIn... I 23:38:54 Writing Session 1 of 1... (1 Track, LBA: 0 - 11185759) I 23:38:54 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11185759) I 23:54:02 Synchronising Cache... I 23:54:04 Closing Track... I 23:54:05 Finalising Disc... I 23:54:15 Exporting Graph Data... I 23:54:15 Graph Data File: C:\Users\Steven\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH08LS20_2.00_TUESDAY-NOVEMBER-10-2009_11-38_PM_RITEK-BR2-00_MAX.ibg I 23:54:15 Export Successfully Completed! I 23:54:15 Operation Successfully Completed! - Duration: 00:15:37 I 23:54:15 Average Write Rate: 24,665 KB/s (5.5x) - Maximum Write Rate: 36,774 KB/s (8.2x) I 23:54:15 Cycling Tray before Verify... W 23:54:24 Waiting for device to become ready... I 23:54:39 Device Ready! I 23:54:40 Operation Started! I 23:54:40 Source Device: [0:1:0] HL-DT-ST BD-RE BH08LS20 2.00 (D:) (ATA) I 23:54:40 Source Media Type: BD-R (Disc ID: RITEK-BR2-00) (Speeds: 2x, 4x, 6x, 8x) I 23:54:40 Image File: -==/\/[bUILD IMAGE]\/\==- I 23:54:40 Image File Sectors: 11,185,760 (MODE1/2048) I 23:54:40 Image File Size: 22,908,436,480 bytes I 23:54:40 Image File Volume Identifier: CASS I 23:54:40 Image File Application Identifier: ImgBurn v2.5.0.0 I 23:54:40 Image File Implementation Identifier: ImgBurn I 23:54:40 Image File File System(s): UDF (2.60) I 23:54:40 Read Speed (Data/Audio): MAX / MAX I 23:54:40 Verifying Session 1 of 1... (1 Track, LBA: 0 - 11185759) I 23:54:40 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 11185759) Any help would be much appreciated. Thanks, Steve
LIGHTNING UK! Posted November 11, 2009 Posted November 11, 2009 You'd need to make a 1:1 copy of a disc (Read mode and then Write mode) that you know for sure works ok. If the copy doesn't work then you can blame it on the discs. Reducing the write speed might improve the burn quality and thus improve its readability in your player.
Gillie2005 Posted November 12, 2009 Author Posted November 12, 2009 Just did a 1:1 copy and got the same error. It must be the disc's. Will not buy Ritek again. Thanks for your reply. Very much appreciated.
Recommended Posts