CerialPhreak Posted November 12, 2009 Posted November 12, 2009 (edited) So I'm trying to burn an iso to a DL with my 112D. I checked out this board and saw other people having issues with this drive but they dont seem to have the same problem as me. I keep getting Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error. This happens without fail, no matter what speed I have it set at. When i checked off 'test mode' and tried that it told me that test mode was not available for this media (or something to that effect) and that data would actually be written to the disc. Oddly enough it got past the Set L0 Data Zone section and wrote about 80% of the data then failed. Any insight? Thanks in advance. Oh and before you point it out, I am in fact using Maxell discs, not Virbatim. I bought them before I got Imgburn, and they're not exactly a bargain brand. I also have the latest firmware for the drive. Log for normal write: I 02:00:04 ImgBurn Version 2.5.0.0 started! I 02:00:04 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 02:00:04 Total Physical Memory: 1,048,052 KB - Available: 360,288 KB W 02:00:04 Drive E:\ (FAT32) does not support single files > 4 GB in size. W 02:00:04 Drive H:\ (FAT32) does not support single files > 4 GB in size. W 02:00:04 SPTD can have a detrimental effect on drive performance. I 02:00:04 Initialising SPTI... I 02:00:04 Searching for SCSI / ATAPI devices... I 02:00:04 Found 1 DVD±RW and 1 BD-ROM/HD DVD-ROM! I 02:20:41 Operation Started! I 02:20:41 Source File: C:\Documents and Settings\Chris\My Documents\Downloads\Call_of_Duty_Modern_Warfare_2_USA_RF-XBOX360-RRoD.[www.usabit.com]\rrod-mw2.dvd I 02:20:41 Source File Sectors: 3,697,696 (MODE1/2048) I 02:20:41 Source File Size: 7,572,881,408 bytes I 02:20:41 Source File Volume Identifier: DVD_ROM I 02:20:41 Source File Volume Set Identifier: fd244000MS UDFBridge I 02:20:41 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 02:20:41 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 02:20:41 Source File File System(s): ISO9660, UDF (1.50) I 02:20:42 Destination Device: [1:0:0] PIONEER DVD-RW DVR-112D 1.21 (D:) (ATA) I 02:20:42 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x, 8x) I 02:20:42 Destination Media Sectors: 4,173,824 I 02:20:42 Write Mode: DVD I 02:20:42 Write Type: DAO I 02:20:42 Write Speed: 4x I 02:20:42 Link Size: Auto I 02:20:42 Lock Volume: Yes I 02:20:42 Test Mode: No I 02:20:42 OPC: No I 02:20:42 BURN-Proof: Enabled I 02:20:42 Advanced Settings - Optimal Writing Speed: No I 02:20:42 Optimal L0 Data Zone Capacity: 1,913,760 I 02:20:42 Optimal L0 Data Zone Method: Copied From Original Disc E 02:21:58 Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error E 02:21:58 Operation Failed! - Duration: 00:01:16 I 02:21:58 Average Write Rate: N/A - Maximum Write Rate: N/A Log for 'test mode': I 14:57:23 Operation Started! I 14:57:23 Source File: C:\Documents and Settings\Chris\My Documents\Downloads\Call_of_Duty_Modern_Warfare_2_USA_RF-XBOX360-RRoD.[www.usabit.com]\rrod-mw2.dvd I 14:57:23 Source File Sectors: 3,697,696 (MODE1/2048) I 14:57:23 Source File Size: 7,572,881,408 bytes I 14:57:23 Source File Volume Identifier: DVD_ROM I 14:57:23 Source File Volume Set Identifier: fd244000MS UDFBridge I 14:57:23 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 14:57:23 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 14:57:23 Source File File System(s): ISO9660, UDF (1.50) I 14:57:23 Destination Device: [1:0:0] PIONEER DVD-RW DVR-112D 1.21 (D:) (ATA) I 14:57:23 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x, 8x) I 14:57:23 Destination Media Sectors: 4,173,824 I 14:57:23 Write Mode: DVD I 14:57:23 Write Type: DAO I 14:57:23 Write Speed: 2.4x I 14:57:23 Link Size: Auto I 14:57:23 Lock Volume: Yes I 14:57:23 Test Mode: No I 14:57:23 OPC: No I 14:57:23 BURN-Proof: Enabled I 14:57:23 Advanced Settings - Optimal Writing Speed: No I 14:57:23 Optimal L0 Data Zone Capacity: 1,913,760 I 14:57:23 Optimal L0 Data Zone Method: Copied From Original Disc I 14:57:49 Set L0 Data Zone Capacity Succeeded! I 14:57:49 Filling Buffer... (40 MB) I 14:57:50 Writing LeadIn... I 14:57:51 Writing Session 1 of 1... (1 Track, LBA: 0 - 3697695) I 14:57:51 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3697695) I 14:57:51 Writing Layer 0... (LBA: 0 - 1913759) I 15:17:51 Writing Layer 1... (LBA: 1913760 - 3697695) W 15:30:35 Failed to Write Sectors 3096416 - 3096447 - Reason: Write Error W 15:30:35 Retrying (1 of 20)... W 15:30:40 Retry Failed - Reason: Invalid Address For Write W 15:30:40 Retrying (2 of 20)... W 15:30:40 Retry Failed - Reason: Invalid Address For Write W 15:30:40 Retrying (3 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (4 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (5 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (6 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (7 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (8 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (9 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (10 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (11 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (12 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (13 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (14 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (15 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (16 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (17 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (18 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (19 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:30:41 Retrying (20 of 20)... W 15:30:41 Retry Failed - Reason: Invalid Address For Write W 15:42:21 Retrying (21)... W 15:42:21 Retry Failed - Reason: Invalid Address For Write W 15:42:23 Retrying (22)... W 15:42:23 Retry Failed - Reason: Invalid Address For Write W 15:42:23 Retrying (23)... W 15:42:23 Retry Failed - Reason: Invalid Address For Write W 15:42:24 Retrying (24)... W 15:42:24 Retry Failed - Reason: Invalid Address For Write W 15:42:24 Retrying (25)... W 15:42:24 Retry Failed - Reason: Invalid Address For Write W 15:42:25 Retrying (26)... W 15:42:25 Retry Failed - Reason: Invalid Address For Write W 15:42:25 Retrying (27)... W 15:42:25 Retry Failed - Reason: Invalid Address For Write W 15:42:26 Retrying (28)... W 15:42:26 Retry Failed - Reason: Invalid Address For Write W 15:42:26 Retrying (29)... W 15:42:26 Retry Failed - Reason: Invalid Address For Write W 15:42:27 Retrying (30)... W 15:42:27 Retry Failed - Reason: Invalid Address For Write W 15:42:36 Retrying (31)... W 15:42:36 Retry Failed - Reason: Invalid Address For Write W 15:42:36 Retrying (32)... W 15:42:36 Retry Failed - Reason: Invalid Address For Write W 15:42:37 Retrying (33)... W 15:42:37 Retry Failed - Reason: Invalid Address For Write W 15:42:37 Retrying (34)... W 15:42:37 Retry Failed - Reason: Invalid Address For Write W 15:42:37 Retrying (35)... W 15:42:37 Retry Failed - Reason: Invalid Address For Write E 15:42:38 Failed to Write Sectors 3096416 - 3096447 - Reason: Write Error E 15:42:38 Next Writable Address: 3095696 I 15:42:38 Synchronising Cache... W 15:42:43 User opted to skip the 'Close Track/Session/Disc' functions. E 15:42:43 Failed to Write Image! Edited November 12, 2009 by CerialPhreak
mmalves Posted November 12, 2009 Posted November 12, 2009 I 02:20:42 Destination Device: [1:0:0] PIONEER DVD-RW DVR-112D 1.21 (D:) (ATA) Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again. If it doesn't work, try a lens cleaning disc on that burner.
LIGHTNING UK! Posted November 12, 2009 Posted November 12, 2009 Test mode doesn't work on DVD+R format discs, the program tells you that when you try. So it getting beyond the setting layer break bit is just a fluke.
CerialPhreak Posted November 12, 2009 Author Posted November 12, 2009 I 02:20:42 Destination Device: [1:0:0] PIONEER DVD-RW DVR-112D 1.21 (D:) (ATA) Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again. If it doesn't work, try a lens cleaning disc on that burner. Didnt realize i had to restart after flashing the drive. Thanks, however it still didnt work. Any other idea's before i go buy another drive? And is there any particular drive you guys would recommend?
CerialPhreak Posted November 13, 2009 Author Posted November 13, 2009 I just ended up saying "the hell with it" and bought an LG GH22LP20. Works well, and it was about 50 usd. Thanks for the help.
Recommended Posts