mazroy Posted November 12, 2009 Share Posted November 12, 2009 Ive been using img burn for a while now but last night i started to have problems with it stopping at 50% and failing to burn succesfully. I wasted 4 d/l discs and need to sort this out so if anyone can help please. heres the log I 18:56:53 ImgBurn Version 2.5.0.0 started! I 18:56:53 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 18:56:53 Total Physical Memory: 3,145,196 KB - Available: 2,448,700 KB W 18:56:53 SPTD can have a detrimental effect on drive performance. I 18:56:53 Initialising SPTI... I 18:56:53 Searching for SCSI / ATAPI devices... I 18:56:53 Found 2 DVD-ROMs, 1 DVD±RW and 1 DVD±RW/RAM! I 19:02:51 Operation Started! I 19:02:51 Source File: C:\Documents and Settings\Roy\My Documents\GrabIt Downloads\FiFA.10.PAL.XBOX360-GLoBAL\fifa10x360.dvd I 19:02:51 Source File Sectors: 3,827,488 (MODE1/2048) I 19:02:51 Source File Size: 7,838,695,424 bytes I 19:02:51 Source File Volume Identifier: DVD_ROM I 19:02:51 Source File Volume Set Identifier: 356fc000MS UDFBridge I 19:02:51 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 19:02:51 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 19:02:51 Source File File System(s): ISO9660, UDF (1.50) I 19:02:51 Destination Device: [0:0:0] HL-DT-ST DVD+-RW GSA-H21N 1.00 (J:) (ATA) I 19:02:51 Destination Media Type: DVD+R DL (Disc ID: UMEDISC-DL1-64) (Speeds: 4x) I 19:02:51 Destination Media Sectors: 4,173,824 I 19:02:51 Write Mode: DVD I 19:02:51 Write Type: DAO I 19:02:51 Write Speed: 2.4x I 19:02:51 Link Size: Auto I 19:02:51 Lock Volume: Yes I 19:02:51 Test Mode: No I 19:02:51 OPC: No I 19:02:51 BURN-Proof: Enabled W 19:02:51 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x) I 19:02:51 Book Type Setting: DVD-ROM I 19:02:51 Optimal L0 Data Zone Capacity: 1,913,760 I 19:02:51 Optimal L0 Data Zone Method: Copied From Original Disc I 19:02:51 Set L0 Data Zone Capacity Succeeded! I 19:02:51 Filling Buffer... (40 MB) I 19:02:52 Writing LeadIn... I 19:03:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 19:03:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 19:03:08 Writing Layer 0... (LBA: 0 - 1913759) I 19:30:40 Writing Layer 1... (LBA: 1913760 - 3827487) W 19:32:01 Failed to Write Sectors 1926208 - 1926239 - Reason: Unknown (Vendor Unique) (ASC: 0x80, ASCQ: 0x04) W 19:32:01 Retrying (1 of 20)... W 19:32:01 Retry Failed - Reason: No Seek Complete W 19:32:01 Retrying (2 of 20)... I 19:32:02 Writing Sectors... W 19:32:54 Failed to Write Sectors 1927648 - 1927679 - Reason: Unknown (Vendor Unique) (ASC: 0x80, ASCQ: 0x04) W 19:32:54 Retrying (1 of 20)... W 19:32:54 Retry Failed - Reason: No Seek Complete W 19:32:54 Retrying (2 of 20)... I 19:32:54 Writing Sectors... thanks Link to comment Share on other sites More sharing options...
mmalves Posted November 12, 2009 Share Posted November 12, 2009 I 19:02:51 Destination Media Type: DVD+R DL (Disc ID: UMEDISC-DL1-64) (Speeds: 4x) Your burner doesn't support those blanks. Try with Verbatim DVD+R DL blanks and it should work. You could try crossflashing that burner but I'm not sure if it would add support for that media Link to comment Share on other sites More sharing options...
spinningwheel Posted November 12, 2009 Share Posted November 12, 2009 (edited) I 19:02:51 Destination Media Type: DVD+R DL (Disc ID: UMEDISC-DL1-64) (Speeds: 4x)[/quote] That's why your drive burns at 4x, there is no 2x for it to follow in the MID. W 19:32:01 Failed to Write Sectors 1926208 - 1926239 - Reason: Unknown (Vendor Unique) (ASC: 0x80, ASCQ: 0x04) W 19:32:01 Retry Failed - Reason: No Seek Complete Your discs are not very compatible with your drive. Read the pink bit at the top of the forum and follow the instructions, pay attention to the one about media. EDIT...Damn...too slow again... Edited November 12, 2009 by spinningwheel Link to comment Share on other sites More sharing options...
mmalves Posted November 12, 2009 Share Posted November 12, 2009 EDIT...Damn...too slow again... Just a minute later, I wouldn't call it slow at all Link to comment Share on other sites More sharing options...
spinningwheel Posted November 12, 2009 Share Posted November 12, 2009 Just a minute later, I wouldn't call it slow at all That's 'cuz I can't type worth a damn..... Link to comment Share on other sites More sharing options...
mazroy Posted November 13, 2009 Author Share Posted November 13, 2009 this is weird because ive burned dual layer @ 2.4x before and never had an issue....ive also used clone to burn at 2X.4x also. and using the same A one media. I will purchase some some verbs and see if things change thanks for your help guys. Link to comment Share on other sites More sharing options...
Recommended Posts