noelski08 Posted November 12, 2009 Posted November 12, 2009 Hi, this is my first time posting here kinda rookie of being a bad one too. Im using a ACER Extensa Laptop with Windows Vista processor. Aslo im using Memorex 8.5gb Dvd+r DL. I tried it for 5 times and 5 blanks dvd's. Here's my log says: I 10:33:30 ImgBurn Version 2.5.0.0 started! I 10:33:30 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 10:33:30 Total Physical Memory: 2,026,768 KB - Available: 980,976 KB W 10:33:30 Drive F:\ (FAT32) does not support single files > 4 GB in size. I 10:33:30 Initialising SPTI... I 10:33:30 Searching for SCSI / ATAPI devices... I 10:33:30 Found 1 DVD±RW/RAM! I 10:35:17 Operation Started! I 10:35:17 Source File: D:\DVD_ROM.MDS I 10:35:17 Source File Sectors: 3,827,488 (MODE1/2048) I 10:35:17 Source File Size: 7,838,695,424 bytes I 10:35:17 Source File Volume Identifier: DVD_ROM I 10:35:17 Source File Volume Set Identifier: 356fc000MS UDFBridge I 10:35:17 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 10:35:17 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 10:35:17 Source File File System(s): ISO9660, UDF (1.50) I 10:35:17 Destination Device: [1:0:0] HL-DT-ST DVDRAM GSA-T50N RP05 (E:) (ATA) I 10:35:17 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x) I 10:35:17 Destination Media Sectors: 4,173,824 I 10:35:17 Write Mode: DVD I 10:35:17 Write Type: DAO I 10:35:17 Write Speed: 2.4x I 10:35:17 Link Size: Auto I 10:35:17 Lock Volume: Yes I 10:35:17 Test Mode: No I 10:35:17 OPC: No I 10:35:17 BURN-Proof: Enabled I 10:35:17 Book Type Setting: N/A I 10:35:17 Optimal L0 Data Zone Capacity: 1,913,760 I 10:35:17 Optimal L0 Data Zone Method: Copied From Original Disc I 10:36:25 Set L0 Data Zone Capacity Succeeded! I 10:36:25 Filling Buffer... (40 MB) I 10:36:27 Writing LeadIn... I 10:36:32 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 10:36:32 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 10:36:32 Writing Layer 0... (LBA: 0 - 1913759) I 10:56:16 Writing Layer 1... (LBA: 1913760 - 3827487) I 11:16:07 Synchronising Cache... I 11:16:09 Closing Track... I 11:16:17 Finalising Disc... I 11:17:35 Exporting Graph Data... I 11:17:36 Graph Data File: C:\Users\noelski08\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T50N_RP05_THURSDAY-NOVEMBER-12-2009_10-35_AM_RICOHJPN-D01-67_2.4x.ibg I 11:17:36 Export Successfully Completed! I 11:17:36 Operation Successfully Completed! - Duration: 00:42:18 I 11:17:36 Average Write Rate: 3,224 KB/s (2.3x) - Maximum Write Rate: 3,375 KB/s (2.4x) I 11:17:36 Cycling Tray before Verify... W 11:40:56 Waiting for device to become ready... I 11:41:58 Device Ready! I 11:42:01 Operation Started! I 11:42:01 Source Device: [1:0:0] HL-DT-ST DVDRAM GSA-T50N RP05 (E:) (ATA) I 11:42:01 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x) I 11:42:01 Image File: D:\DVD_ROM.MDS I 11:42:01 Image File Sectors: 3,827,488 (MODE1/2048) I 11:42:01 Image File Size: 7,838,695,424 bytes I 11:42:01 Image File Volume Identifier: DVD_ROM I 11:42:01 Image File Volume Set Identifier: 356fc000MS UDFBridge I 11:42:01 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 11:42:01 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 11:42:01 Image File File System(s): ISO9660, UDF (1.50) I 11:42:01 Read Speed (Data/Audio): MAX / MAX I 11:42:01 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 11:42:01 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 11:42:01 Verifying Layer 0... (LBA: 0 - 1913759) I 11:53:08 Verifying Layer 1... (LBA: 1913760 - 3827487) I 12:04:12 Exporting Graph Data... I 12:04:12 Graph Data File: C:\Users\noelski08\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-T50N_RP05_THURSDAY-NOVEMBER-12-2009_10-35_AM_RICOHJPN-D01-67_2.4x.ibg I 12:04:12 Export Successfully Completed! I 12:04:12 Operation Successfully Completed! - Duration: 00:22:10 I 12:04:12 Average Verify Rate: 5,755 KB/s (4.2x) - Maximum Verify Rate: 8,260 KB/s (6.0x) Here's the other message after successfully completed (!) " All attempts to automatically close drive tray have failed" Note: "This is to be expected on laptop style eliminate slimline drives". Please close it manually and then click Ok to continue. Also i went to set default program IMGBURN program so that every time i make backups it won't turn into winrar or winzip. Thanks for looking and greatly appreciate the help in advance.
Cynthia Posted November 12, 2009 Posted November 12, 2009 Hi and welcome to the forum, noelski08! What's the problem? The burn + verify looks ok. That the tray has to be closed manually happens on slimlinebased drives that fails to take instruction on close the tray. If you don't want the tray to open up after the verify, you can change that in the settings.
Recommended Posts