AngelicDevil Posted November 13, 2009 Posted November 13, 2009 This is the info that comes when the disk is near the END (at 100%) of the burn and after varifing the disk. Synchronise Cache Failed! Device: [0:0:0] HL-DT-ST DVDRAM GSA-4167B DL11 (E:) (ATA) This is the first reason : REASON: Program Memory Area is Full Then i get this one: Reason: Session Fixtion Error - Incomplete track in Session I 20:21:52 ImgBurn Version 2.5.0.0 started! I 20:21:52 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 20:21:52 Total Physical Memory: 2,096,236 KB - Available: 1,355,648 KB I 20:21:52 Initialising SPTI... I 20:21:52 Searching for SCSI / ATAPI devices... I 20:21:52 Found 1 DVD±RW/RAM! I 20:22:44 Operation Started! I 20:22:44 Source File: C:\Documents and Settings\Josh\My Documents\My Downloads\xxx-hfg.dvd I 20:22:44 Source File Sectors: 3,827,488 (MODE1/2048) I 20:22:44 Source File Size: 7,838,695,424 bytes I 20:22:44 Source File Volume Identifier: DVD_ROM I 20:22:44 Source File Volume Set Identifier: fd244000MS UDFBridge I 20:22:44 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 20:22:44 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 20:22:44 Source File File System(s): ISO9660, UDF (1.50) I 20:22:44 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-4167B DL11 (E:) (ATA) I 20:22:44 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x) I 20:22:44 Destination Media Sectors: 3,827,520 I 20:22:44 Write Mode: DVD I 20:22:44 Write Type: DAO I 20:22:44 Write Speed: 2x I 20:22:44 Link Size: Auto I 20:22:44 Lock Volume: Yes I 20:22:44 Test Mode: No I 20:22:44 OPC: No I 20:22:44 BURN-Proof: Enabled W 20:22:51 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x) I 20:22:51 Book Type Setting: DVD-ROM I 20:22:51 Optimal L0 Data Zone Capacity: 1,913,760 I 20:22:51 Optimal L0 Data Zone Method: Copied From Original Disc I 20:22:51 Set L0 Data Zone Capacity Succeeded! I 20:22:51 Filling Buffer... (40 MB) I 20:22:52 Writing LeadIn... I 20:23:05 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 20:23:05 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 20:23:05 Writing Layer 0... (LBA: 0 - 1913759) I 20:42:42 Writing Layer 1... (LBA: 1913760 - 3827487) I 21:02:24 Synchronising Cache... W 21:02:29 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 21:02:29 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure W 21:02:29 Retrying (1 of 3)... W 21:02:33 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure W 21:02:33 Retry Failed - Reason: Program Memory Area Update Failure W 21:02:33 Retrying (2 of 3)... W 21:02:35 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Is Full W 21:02:35 Retry Failed - Reason: Program Memory Area Is Full W 21:02:35 Retrying (3 of 3)... W 21:02:36 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Program Memory Area Is Full W 21:02:36 Retry Failed - Reason: Program Memory Area Is Full W 21:03:22 Retrying (4)... W 21:03:23 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Program Memory Area Is Full W 21:03:23 Retry Failed - Reason: Program Memory Area Is Full I 21:05:14 Closing Track... I 21:05:15 Finalising Disc... W 21:05:16 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in Session W 21:05:16 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session W 21:05:16 Retrying (1 of 3)... W 21:05:17 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in Session W 21:05:17 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 21:05:17 Retrying (2 of 3)... W 21:05:18 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in Session W 21:05:18 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session W 21:05:18 Retrying (3 of 3)... W 21:05:19 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in Session W 21:05:19 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session I 21:06:19 Exporting Graph Data... I 21:06:20 Graph Data File: C:\Documents and Settings\Josh\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GSA-4167B_DL11_THURSDAY-NOVEMBER-12-2009_8-22_PM_RITEK-S04-66_2x.ibg I 21:06:20 Export Successfully Completed! I 21:06:20 Operation Successfully Completed! - Duration: 00:43:35 I 21:06:20 Average Write Rate: 3,246 KB/s (2.3x) - Maximum Write Rate: 3,360 KB/s (2.4x) I 21:06:20 Cycling Tray before Verify... W 21:06:36 Waiting for device to become ready... I 21:07:37 Device Ready! I 21:08:02 Operation Started! I 21:08:02 Source Device: [0:0:0] HL-DT-ST DVDRAM GSA-4167B DL11 (E:) (ATA) I 21:08:02 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: RITEK-S04-66) (Speeds: 2.4x) I 21:08:02 Image File: C:\Documents and Settings\Josh\My Documents\My Downloads\xxx-hfg.dvd I 21:08:02 Image File Sectors: 3,827,488 (MODE1/2048) I 21:08:02 Image File Size: 7,838,695,424 bytes I 21:08:02 Image File Volume Identifier: DVD_ROM I 21:08:02 Image File Volume Set Identifier: fd244000MS UDFBridge I 21:08:02 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 21:08:02 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 21:08:02 Image File File System(s): ISO9660, UDF (1.50) I 21:08:02 Read Speed (Data/Audio): MAX / MAX E 21:08:21 Session 1, Track 1 is smaller on the disc than it is in the image file. E 21:08:21 Disc's Track Sectors: 0 (TOC Sectors: 0) E 21:08:21 Image File's Track Sectors: 3827488 (TOC Sectors: 3827488) E 21:08:21 Operation Failed! - Duration: 00:00:18 I 21:08:21 Average Verify Rate: N/A - Maximum Verify Rate: N/A Now i can burn cd's and dvd's and they work fine, but just recently i can't do dual layers. I was able to burn a game and it worked but then i get the errors after that game was burned. Any and all help is appreciated. thanks XD
mmalves Posted November 13, 2009 Posted November 13, 2009 I 20:22:44 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-4167B DL11 (E:) (ATA)I 20:22:44 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x) I 20:22:44 Destination Media Sectors: 3,827,520 Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again with a brand new blank disc. If it doesn't work then use a lens cleaning disc on that burner, try with Verbatim 2.4x DVD+R DL blanks or buy a new burner.
Recommended Posts