Jump to content

My disk doesn't burn properly and will not play and can't acces teh files


Recommended Posts

Posted

This is the info that comes when the disk is near the END (at 100%) of the burn and after varifing the disk.

 

Synchronise Cache Failed!

 

Device: [0:0:0] HL-DT-ST DVDRAM GSA-4167B DL11 (E:) (ATA)

 

This is the first reason :

REASON: Program Memory Area is Full

 

Then i get this one:

Reason: Session Fixtion Error - Incomplete track in Session

 

I 20:21:52 ImgBurn Version 2.5.0.0 started!

I 20:21:52 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 20:21:52 Total Physical Memory: 2,096,236 KB - Available: 1,355,648 KB

I 20:21:52 Initialising SPTI...

I 20:21:52 Searching for SCSI / ATAPI devices...

I 20:21:52 Found 1 DVD±RW/RAM!

I 20:22:44 Operation Started!

I 20:22:44 Source File: C:\Documents and Settings\Josh\My Documents\My Downloads\xxx-hfg.dvd

I 20:22:44 Source File Sectors: 3,827,488 (MODE1/2048)

I 20:22:44 Source File Size: 7,838,695,424 bytes

I 20:22:44 Source File Volume Identifier: DVD_ROM

I 20:22:44 Source File Volume Set Identifier: fd244000MS UDFBridge

I 20:22:44 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 20:22:44 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 20:22:44 Source File File System(s): ISO9660, UDF (1.50)

I 20:22:44 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-4167B DL11 (E:) (ATA)

I 20:22:44 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x)

I 20:22:44 Destination Media Sectors: 3,827,520

I 20:22:44 Write Mode: DVD

I 20:22:44 Write Type: DAO

I 20:22:44 Write Speed: 2x

I 20:22:44 Link Size: Auto

I 20:22:44 Lock Volume: Yes

I 20:22:44 Test Mode: No

I 20:22:44 OPC: No

I 20:22:44 BURN-Proof: Enabled

W 20:22:51 Write Speed Miscompare! - Wanted: 2,770 KB/s (2x), Got: 3,324 KB/s (2.4x)

I 20:22:51 Book Type Setting: DVD-ROM

I 20:22:51 Optimal L0 Data Zone Capacity: 1,913,760

I 20:22:51 Optimal L0 Data Zone Method: Copied From Original Disc

I 20:22:51 Set L0 Data Zone Capacity Succeeded!

I 20:22:51 Filling Buffer... (40 MB)

I 20:22:52 Writing LeadIn...

I 20:23:05 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 20:23:05 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 20:23:05 Writing Layer 0... (LBA: 0 - 1913759)

I 20:42:42 Writing Layer 1... (LBA: 1913760 - 3827487)

I 21:02:24 Synchronising Cache...

W 21:02:29 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure

W 21:02:29 Synchronise Cache Failed! - Reason: Program Memory Area Update Failure

W 21:02:29 Retrying (1 of 3)...

W 21:02:33 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Update Failure

W 21:02:33 Retry Failed - Reason: Program Memory Area Update Failure

W 21:02:33 Retrying (2 of 3)...

W 21:02:35 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/3) - Program Memory Area Is Full

W 21:02:35 Retry Failed - Reason: Program Memory Area Is Full

W 21:02:35 Retrying (3 of 3)...

W 21:02:36 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Program Memory Area Is Full

W 21:02:36 Retry Failed - Reason: Program Memory Area Is Full

W 21:03:22 Retrying (4)...

W 21:03:23 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Program Memory Area Is Full

W 21:03:23 Retry Failed - Reason: Program Memory Area Is Full

I 21:05:14 Closing Track...

I 21:05:15 Finalising Disc...

W 21:05:16 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in

 

Session

W 21:05:16 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session

W 21:05:16 Retrying (1 of 3)...

W 21:05:17 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in

 

Session

W 21:05:17 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session

W 21:05:17 Retrying (2 of 3)...

W 21:05:18 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in

 

Session

W 21:05:18 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session

W 21:05:18 Retrying (3 of 3)...

W 21:05:19 Potential 'WaitImmediateIO' Deferred Error - (0/3) - Session Fixation Error - Incomplete Track in

 

Session

W 21:05:19 Retry Failed - Reason: Session Fixation Error - Incomplete Track in Session

I 21:06:19 Exporting Graph Data...

I 21:06:20 Graph Data File: C:\Documents and Settings\Josh\Application Data\ImgBurn\Graph Data

 

Files\HL-DT-ST_DVDRAM_GSA-4167B_DL11_THURSDAY-NOVEMBER-12-2009_8-22_PM_RITEK-S04-66_2x.ibg

I 21:06:20 Export Successfully Completed!

I 21:06:20 Operation Successfully Completed! - Duration: 00:43:35

I 21:06:20 Average Write Rate: 3,246 KB/s (2.3x) - Maximum Write Rate: 3,360 KB/s (2.4x)

I 21:06:20 Cycling Tray before Verify...

W 21:06:36 Waiting for device to become ready...

I 21:07:37 Device Ready!

I 21:08:02 Operation Started!

I 21:08:02 Source Device: [0:0:0] HL-DT-ST DVDRAM GSA-4167B DL11 (E:) (ATA)

I 21:08:02 Source Media Type: DVD+R DL (Book Type: DVD+R DL) (Disc ID: RITEK-S04-66) (Speeds: 2.4x)

I 21:08:02 Image File: C:\Documents and Settings\Josh\My Documents\My Downloads\xxx-hfg.dvd

I 21:08:02 Image File Sectors: 3,827,488 (MODE1/2048)

I 21:08:02 Image File Size: 7,838,695,424 bytes

I 21:08:02 Image File Volume Identifier: DVD_ROM

I 21:08:02 Image File Volume Set Identifier: fd244000MS UDFBridge

I 21:08:02 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 21:08:02 Image File Implementation Identifier: Microsoft CDIMAGE UDF

I 21:08:02 Image File File System(s): ISO9660, UDF (1.50)

I 21:08:02 Read Speed (Data/Audio): MAX / MAX

E 21:08:21 Session 1, Track 1 is smaller on the disc than it is in the image file.

E 21:08:21 Disc's Track Sectors: 0 (TOC Sectors: 0)

E 21:08:21 Image File's Track Sectors: 3827488 (TOC Sectors: 3827488)

E 21:08:21 Operation Failed! - Duration: 00:00:18

I 21:08:21 Average Verify Rate: N/A - Maximum Verify Rate: N/A

 

 

 

Now i can burn cd's and dvd's and they work fine, but just recently i can't do dual layers. I was able to burn a game and it worked but then i get the errors after that game was burned.

 

 

Any and all help is appreciated. thanks XD

Posted
I 20:22:44 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-4167B DL11 (E:) (ATA)

I 20:22:44 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x)

I 20:22:44 Destination Media Sectors: 3,827,520

Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again with a brand new blank disc. If it doesn't work then use a lens cleaning disc on that burner, try with Verbatim 2.4x DVD+R DL blanks or buy a new burner.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.