burning problem help

[madpaw06]

hi,here is my problem ive been trying to burn dvds using dvd-r,s However sometimes when i burn a disc, at the end it says 100% complete, but still says synchronising cache and just hangs and never completes (hence the tray never ejects). i know its not my laptop as the drive firmware is upto date.ive read al the facts also.

 

can someone please point me in the right direction (as soon i will be selling coasters) thanks in advance.

Edited November 13, 2009 by madpaw06

[mmalves]

Please read the pink banner at the top of this page (i.e. post the log of that burn).

[madpaw06]

Please read the pink banner at the top of this page (i.e. post the log of that burn).

ooopps my bad sorry here is what it says before i stop it as it does not finnish,as i mentioned above.(this is a dif burn,but same outcome)

 

I 00:08:31 ImgBurn Version 2.5.0.0 started!

I 00:08:31 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)

I 00:08:31 Total Physical Memory: 1,037,700 KB - Available: 195,148 KB

I 00:08:31 Initialising SPTI...

I 00:08:31 Searching for SCSI / ATAPI devices...

I 00:08:31 Found 1 DVD-ROM and 1 DVD±RW/RAM!

I 00:09:14 Operation Started!

I 00:09:14 Source File: C:\Users\paula\Downloads\GrabIt Downloads\Ben 10 Alien Force Vilgax Attacks\xxx-ben.iso

I 00:09:14 Source File Sectors: 2,294,912 (MODE1/2048)

I 00:09:14 Source File Size: 4,699,979,776 bytes

I 00:09:14 Source File Volume Identifier: Ben 10 Alien Force: Vilgax Attacks

I 00:09:14 Source File File System(s): Special

I 00:09:14 Destination Device: [0:0:0] Optiarc DVD RW AD-7530A EH31 (E:) (ATA)

I 00:09:14 Destination Media Type: DVD-R (Disc ID: UME02) (Speeds: 2x, 4x)

I 00:09:14 Destination Media Sectors: 2,297,888

I 00:09:14 Write Mode: DVD

I 00:09:14 Write Type: DAO

I 00:09:14 Write Speed: 8x

I 00:09:14 Link Size: Auto

I 00:09:14 Lock Volume: Yes

I 00:09:14 Test Mode: No

I 00:09:14 OPC: No

I 00:09:14 BURN-Proof: Enabled

W 00:09:17 Write Speed Miscompare! - Wanted: 11,080 KB/s (8x), Got: 5,540 KB/s (4x)

I 00:09:18 Filling Buffer... (40 MB)

I 00:09:19 Writing LeadIn...

I 00:09:32 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 00:09:32 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

I 00:39:01 Synchronising Cache...

[mmalves]

Try with Verbatim or Taiyo Yuden blanks. If it doesn't work at first then try a lens cleaning disc on that burner.

[madpaw06]

Try with Verbatim or Taiyo Yuden blanks. If it doesn't work at first then try a lens cleaning disc on that burner.

ive tryd what you suggested allready as i looked round the forum and there was a sim thread,were that was mentioned.

i still had no joy.

[spinningwheel]

ive tryd what you suggested allready as i looked round the forum and there was a sim thread,were that was mentioned.

i still had no joy.

 

Then it really looks like all you can do is replace the burner I did a quick look around and didn't find an updated firmware.

[madpaw06]

ive tryd what you suggested allready as i looked round the forum and there was a sim thread,were that was mentioned.

i still had no joy.

 

Then it really looks like all you can do is replace the burner I did a quick look around and didn't find an updated firmware.

i allso did that but to no avail i must say though late last night it did everything apart from verify the disc that fail becouse it siad the track was smaller than what the image file was.

[mmalves]

Please post the log from when you've burned with Verbatim or Taiyo Yuden blanks.

[madpaw06]

well i seem to have sorted it out.i tryd my lens cleaner again (that didnt work)

so i cleaned the lense the good old fashion way ..(with vinager and a cotton bud)

left if for 5 mins and then tryd to burn a disc again,would you adam and eve it it worked

all the burning,verifying the lot.

i will post the log when i burn another disc to prove it worked.

just go,s to show if its good enough for your windows then its good enough as a lense cleaner.

thanks for your help all the same peeps most greatfull..

 

heres the log lol (oh it took long cos i went out and my lappy draw doesnt go back in on its own)

 

I 15:34:34 ImgBurn Version 2.5.0.0 started!

I 15:34:34 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)

I 15:34:34 Total Physical Memory: 1,037,700 KB - Available: 385,480 KB

I 15:34:34 Initialising SPTI...

I 15:34:34 Searching for SCSI / ATAPI devices...

I 15:34:36 Found 1 DVD-ROM and 1 DVD±RW/RAM!

I 15:46:40 Operation Started!

I 15:46:40 Source File: C:\Users\paula\Downloads\GrabIt Downloads\New SUPER MARIO BROS. Wii-FIXED\New SUPER MARIO BROS. Wii-FIXED.iso

I 15:46:40 Source File Sectors: 2,294,912 (MODE1/2048)

I 15:46:40 Source File Size: 4,699,979,776 bytes

I 15:46:40 Source File Volume Identifier: New SUPER MARIO BROS. Wii

I 15:46:40 Source File File System(s): Special

I 15:46:40 Destination Device: [0:0:0] Optiarc DVD RW AD-7530A EH31 (E:) (ATA)

I 15:46:40 Destination Media Type: DVD-R (Disc ID: UME02) (Speeds: 2x, 4x)

I 15:46:40 Destination Media Sectors: 2,298,496

I 15:46:40 Write Mode: DVD

I 15:46:40 Write Type: DAO

I 15:46:40 Write Speed: 4x

I 15:46:40 Link Size: Auto

I 15:46:40 Lock Volume: Yes

I 15:46:40 Test Mode: No

I 15:46:40 OPC: No

I 15:46:40 BURN-Proof: Enabled

I 15:46:43 Filling Buffer... (40 MB)

I 15:46:44 Writing LeadIn...

I 15:47:30 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 15:47:30 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

W 15:53:20 Waiting for buffers to recover... (LBA: 448544)

W 15:53:58 Waiting for hard disk activity to reach threshold level...

I 15:54:48 Writing Sectors...

I 16:18:15 Synchronising Cache...

I 16:18:37 Exporting Graph Data...

I 16:18:37 Graph Data File: C:\Users\paula\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7530A_EH31_14-NOVEMBER-2009_15-46_UME02_4x.ibg

I 16:18:37 Export Successfully Completed!

I 16:18:37 Operation Successfully Completed! - Duration: 00:31:56

I 16:18:37 Average Write Rate: 2,489 KB/s (1.8x) - Maximum Write Rate: 2,846 KB/s (2.1x)

I 16:18:37 Cycling Tray before Verify...

W 18:10:39 Waiting for device to become ready...

I 18:10:52 Device Ready!

I 18:10:52 Operation Started!

I 18:10:52 Source Device: [0:0:0] Optiarc DVD RW AD-7530A EH31 (E:) (ATA)

I 18:10:52 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: UME02) (Speeds: 2x, 4x)

I 18:10:52 Image File: C:\Users\paula\Downloads\GrabIt Downloads\New SUPER MARIO BROS. Wii-FIXED\New SUPER MARIO BROS. Wii-FIXED.iso

I 18:10:52 Image File Sectors: 2,294,912 (MODE1/2048)

I 18:10:52 Image File Size: 4,699,979,776 bytes

I 18:10:52 Image File Volume Identifier: New SUPER MARIO BROS. Wii

I 18:10:52 Image File File System(s): Special

I 18:10:52 Read Speed (Data/Audio): MAX / MAX

I 18:10:52 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 18:10:52 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

I 18:20:27 Exporting Graph Data...

I 18:20:27 Graph Data File: C:\Users\paula\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7530A_EH31_14-NOVEMBER-2009_15-46_UME02_4x.ibg

I 18:20:27 Export Successfully Completed!

I 18:20:27 Operation Successfully Completed! - Duration: 00:09:30

I 18:20:27 Average Verify Rate: 8,052 KB/s (5.8x) - Maximum Verify Rate: 11,709 KB/s (8.5x)

Edited November 14, 2009 by madpaw06

[spinningwheel]

Thanks for letting us know what worked for you