Jump to content

burning problem help

madpaw06

By madpaw06
in ImgBurn Support

 Share

Recommended Posts

madpaw06 ISF Newbie

madpaw06

Posted
Posted (edited)

hi,here is my problem ive been trying to burn dvds using dvd-r,s However sometimes when i burn a disc, at the end it says 100% complete, but still says synchronising cache and just hangs and never completes (hence the tray never ejects). i know its not my laptop as the drive firmware is upto date.ive read al the facts also.

 

can someone please point me in the right direction (as soon i will be selling coasters) thanks in advance.

Edited by madpaw06
Link to comment
Share on other sites
madpaw06 ISF Newbie

madpaw06

Posted
  • Author
Posted

Please read the pink banner at the top of this page (i.e. post the log of that burn).

ooopps my bad sorry here is what it says before i stop it as it does not finnish,as i mentioned above.(this is a dif burn,but same outcome)

 

I 00:08:31 ImgBurn Version 2.5.0.0 started!

I 00:08:31 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)

I 00:08:31 Total Physical Memory: 1,037,700 KB - Available: 195,148 KB

I 00:08:31 Initialising SPTI...

I 00:08:31 Searching for SCSI / ATAPI devices...

I 00:08:31 Found 1 DVD-ROM and 1 DVD±RW/RAM!

I 00:09:14 Operation Started!

I 00:09:14 Source File: C:\Users\paula\Downloads\GrabIt Downloads\Ben 10 Alien Force Vilgax Attacks\xxx-ben.iso

I 00:09:14 Source File Sectors: 2,294,912 (MODE1/2048)

I 00:09:14 Source File Size: 4,699,979,776 bytes

I 00:09:14 Source File Volume Identifier: Ben 10 Alien Force: Vilgax Attacks

I 00:09:14 Source File File System(s): Special

I 00:09:14 Destination Device: [0:0:0] Optiarc DVD RW AD-7530A EH31 (E:) (ATA)

I 00:09:14 Destination Media Type: DVD-R (Disc ID: UME02) (Speeds: 2x, 4x)

I 00:09:14 Destination Media Sectors: 2,297,888

I 00:09:14 Write Mode: DVD

I 00:09:14 Write Type: DAO

I 00:09:14 Write Speed: 8x

I 00:09:14 Link Size: Auto

I 00:09:14 Lock Volume: Yes

I 00:09:14 Test Mode: No

I 00:09:14 OPC: No

I 00:09:14 BURN-Proof: Enabled

W 00:09:17 Write Speed Miscompare! - Wanted: 11,080 KB/s (8x), Got: 5,540 KB/s (4x)

I 00:09:18 Filling Buffer... (40 MB)

I 00:09:19 Writing LeadIn...

I 00:09:32 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 00:09:32 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

I 00:39:01 Synchronising Cache...

Link to comment
Share on other sites
madpaw06 ISF Newbie

madpaw06

Posted
  • Author
Posted

Try with Verbatim or Taiyo Yuden blanks. If it doesn't work at first then try a lens cleaning disc on that burner.

ive tryd what you suggested allready as i looked round the forum and there was a sim thread,were that was mentioned.

i still had no joy.

Link to comment
Share on other sites
spinningwheel ISF God

spinningwheel

Posted
Posted
ive tryd what you suggested allready as i looked round the forum and there was a sim thread,were that was mentioned.

i still had no joy.

 

Then it really looks like all you can do is replace the burner I did a quick look around and didn't find an updated firmware.

Link to comment
Share on other sites
madpaw06 ISF Newbie

madpaw06

Posted
  • Author
Posted
ive tryd what you suggested allready as i looked round the forum and there was a sim thread,were that was mentioned.

i still had no joy.

 

Then it really looks like all you can do is replace the burner I did a quick look around and didn't find an updated firmware.

i allso did that but to no avail i must say though late last night it did everything apart from verify the disc that fail becouse it siad the track was smaller than what the image file was.

Link to comment
Share on other sites
madpaw06 ISF Newbie

madpaw06

Posted
  • Author
Posted (edited)

well i seem to have sorted it out.i tryd my lens cleaner again (that didnt work)

so i cleaned the lense the good old fashion way ..(with vinager and a cotton bud)

left if for 5 mins and then tryd to burn a disc again,would you adam and eve it it worked

all the burning,verifying the lot.

i will post the log when i burn another disc to prove it worked.

just go,s to show if its good enough for your windows then its good enough as a lense cleaner.

thanks for your help all the same peeps most greatfull..

 

heres the log lol (oh it took long cos i went out and my lappy draw doesnt go back in on its own)

 

I 15:34:34 ImgBurn Version 2.5.0.0 started!

I 15:34:34 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2)

I 15:34:34 Total Physical Memory: 1,037,700 KB - Available: 385,480 KB

I 15:34:34 Initialising SPTI...

I 15:34:34 Searching for SCSI / ATAPI devices...

I 15:34:36 Found 1 DVD-ROM and 1 DVD±RW/RAM!

I 15:46:40 Operation Started!

I 15:46:40 Source File: C:\Users\paula\Downloads\GrabIt Downloads\New SUPER MARIO BROS. Wii-FIXED\New SUPER MARIO BROS. Wii-FIXED.iso

I 15:46:40 Source File Sectors: 2,294,912 (MODE1/2048)

I 15:46:40 Source File Size: 4,699,979,776 bytes

I 15:46:40 Source File Volume Identifier: New SUPER MARIO BROS. Wii

I 15:46:40 Source File File System(s): Special

I 15:46:40 Destination Device: [0:0:0] Optiarc DVD RW AD-7530A EH31 (E:) (ATA)

I 15:46:40 Destination Media Type: DVD-R (Disc ID: UME02) (Speeds: 2x, 4x)

I 15:46:40 Destination Media Sectors: 2,298,496

I 15:46:40 Write Mode: DVD

I 15:46:40 Write Type: DAO

I 15:46:40 Write Speed: 4x

I 15:46:40 Link Size: Auto

I 15:46:40 Lock Volume: Yes

I 15:46:40 Test Mode: No

I 15:46:40 OPC: No

I 15:46:40 BURN-Proof: Enabled

I 15:46:43 Filling Buffer... (40 MB)

I 15:46:44 Writing LeadIn...

I 15:47:30 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 15:47:30 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

W 15:53:20 Waiting for buffers to recover... (LBA: 448544)

W 15:53:58 Waiting for hard disk activity to reach threshold level...

I 15:54:48 Writing Sectors...

I 16:18:15 Synchronising Cache...

I 16:18:37 Exporting Graph Data...

I 16:18:37 Graph Data File: C:\Users\paula\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7530A_EH31_14-NOVEMBER-2009_15-46_UME02_4x.ibg

I 16:18:37 Export Successfully Completed!

I 16:18:37 Operation Successfully Completed! - Duration: 00:31:56

I 16:18:37 Average Write Rate: 2,489 KB/s (1.8x) - Maximum Write Rate: 2,846 KB/s (2.1x)

I 16:18:37 Cycling Tray before Verify...

W 18:10:39 Waiting for device to become ready...

I 18:10:52 Device Ready!

I 18:10:52 Operation Started!

I 18:10:52 Source Device: [0:0:0] Optiarc DVD RW AD-7530A EH31 (E:) (ATA)

I 18:10:52 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: UME02) (Speeds: 2x, 4x)

I 18:10:52 Image File: C:\Users\paula\Downloads\GrabIt Downloads\New SUPER MARIO BROS. Wii-FIXED\New SUPER MARIO BROS. Wii-FIXED.iso

I 18:10:52 Image File Sectors: 2,294,912 (MODE1/2048)

I 18:10:52 Image File Size: 4,699,979,776 bytes

I 18:10:52 Image File Volume Identifier: New SUPER MARIO BROS. Wii

I 18:10:52 Image File File System(s): Special

I 18:10:52 Read Speed (Data/Audio): MAX / MAX

I 18:10:52 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2294911)

I 18:10:52 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2294911)

I 18:20:27 Exporting Graph Data...

I 18:20:27 Graph Data File: C:\Users\paula\AppData\Roaming\ImgBurn\Graph Data Files\Optiarc_DVD_RW_AD-7530A_EH31_14-NOVEMBER-2009_15-46_UME02_4x.ibg

I 18:20:27 Export Successfully Completed!

I 18:20:27 Operation Successfully Completed! - Duration: 00:09:30

I 18:20:27 Average Verify Rate: 8,052 KB/s (5.8x) - Maximum Verify Rate: 11,709 KB/s (8.5x)

Edited by madpaw06
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept