coolhand Posted November 20, 2009 Share Posted November 20, 2009 Using imgburn for xbox360 game and keep getting error midway through burn, see log below. Never had this problem before with imgburn. Cant remember if I updated to new version recently. Also I do use cheap blank media, but have never had this before. Hoping its not my dvd drive. cheers for any help.Should mention this has happened with different images so the problem dosen't lie with the game I 08:25:21 ImgBurn Version 2.5.0.0 started! I 08:25:21 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 08:25:21 Total Physical Memory: 523,764 KB - Available: 183,008 KB W 08:25:21 SPTD can have a detrimental effect on drive performance. I 08:25:21 Initialising SPTI... I 08:25:21 Searching for SCSI / ATAPI devices... I 08:25:22 Found 1 DVD±RW/RAM! I 08:26:58 Operation Started! I 08:26:58 Source File: C:\Documents and Settings\dan\Desktop\Fallout 3 D1.dvd I 08:26:58 Source File Sectors: 3,825,924 (MODE1/2048) I 08:26:58 Source File Size: 7,835,492,352 bytes I 08:26:58 Source File Volume Identifier: XGD2DVD_NTSC I 08:26:58 Source File Volume Set Identifier: 34672923 I 08:26:58 Source File Implementation Identifier: Sonic Scenarist 3.1 I 08:26:58 Source File File System(s): ISO9660, UDF (1.02) I 08:26:58 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H54L 1.00 (D (ATA) I 08:26:58 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 08:26:58 Destination Media Sectors: 4,173,824 I 08:26:58 Write Mode: DVD I 08:26:58 Write Type: DAO I 08:26:58 Write Speed: 1x I 08:26:58 Link Size: Auto I 08:26:58 Lock Volume: Yes I 08:26:58 Test Mode: No I 08:26:58 OPC: No I 08:26:58 BURN-Proof: Enabled W 08:26:58 Write Speed Miscompare! - Wanted: 1,385 KB/s (1x), Got: 5,540 KB/s (4x) I 08:26:58 Book Type Setting: DVD-ROM I 08:26:58 Optimal L0 Data Zone Capacity: 1,913,760 I 08:26:58 Optimal L0 Data Zone Method: Copied From Original Disc I 08:26:58 Set L0 Data Zone Capacity Succeeded! I 08:26:59 Filling Buffer... (20 MB) I 08:26:59 Writing LeadIn... I 08:27:51 Writing Session 1 of 1... (1 Track, LBA: 0 - 3825923) I 08:27:51 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3825923) I 08:27:51 Writing Layer 0... (LBA: 0 - 1913759) W 08:32:00 Failed to Write Sectors 665856 - 665887 - Reason: Spindle Servo Failure W 08:32:00 Retrying (1 of 20)... W 08:32:00 Retry Failed - Reason: No Seek Complete W 08:32:00 Retrying (2 of 20)... W 08:32:00 Retry Failed - Reason: Invalid Address For Write W 08:32:00 Retrying (3 of 20)... W 08:32:00 Retry Failed - Reason: Invalid Address For Write W 08:32:00 Retrying (4 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (5 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (6 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (7 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (8 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (9 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (10 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (11 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (12 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (13 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (14 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (15 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (16 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (17 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (18 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (19 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:01 Retrying (20 of 20)... W 08:32:01 Retry Failed - Reason: Invalid Address For Write W 08:32:21 Retrying (21)... W 08:32:21 Retry Failed - Reason: Invalid Address For Write W 08:32:35 Retrying (22)... W 08:32:35 Retry Failed - Reason: Invalid Address For Write W 08:32:37 Retrying (23)... W 08:32:37 Retry Failed - Reason: Invalid Address For Write W 08:32:37 Retrying (24)... W 08:32:37 Retry Failed - Reason: Invalid Address For Write W 08:32:38 Retrying (25)... W 08:32:38 Retry Failed - Reason: Invalid Address For Write W 08:32:38 Retrying (26)... W 08:32:38 Retry Failed - Reason: Invalid Address For Write W 08:32:38 Retrying (27)... W 08:32:38 Retry Failed - Reason: Invalid Address For Write W 08:32:38 Retrying (28)... W 08:32:39 Retry Failed - Reason: Invalid Address For Write W 08:32:39 Retrying (29)... W 08:32:39 Retry Failed - Reason: Invalid Address For Write W 08:32:39 Retrying (30)... W 08:32:39 Retry Failed - Reason: Invalid Address For Write E 08:32:40 Failed to Write Sectors 665856 - 665887 - Reason: Spindle Servo Failure E 08:32:40 Next Writable Address: 0 I 08:32:40 Synchronising Cache... I 08:32:51 Closing Track... I 08:32:52 Finalising Disc... E 08:32:53 Failed to Write Image! I 08:32:53 Exporting Graph Data... I 08:32:53 Graph Data File: C:\Documents and Settings\dan\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GSA-H54L_1.00_20-NOVEMBER-2009_08-26_RICOHJPN-D01-67_1x.ibg I 08:32:53 Export Successfully Completed! E 08:32:53 Operation Failed! - Duration: 00:05:55 I 08:32:53 Average Write Rate: 4,624 KB/s (3.3x) - Maximum Write Rate: 5,592 KB/s (4.0x) Link to comment Share on other sites More sharing options...
mmalves Posted November 20, 2009 Share Posted November 20, 2009 I 08:26:58 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H54L 1.00 (D (ATA)I 08:26:58 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 08:26:58 Write Speed: 1x W 08:26:58 Write Speed Miscompare! - Wanted: 1,385 KB/s (1x), Got: 5,540 KB/s (4x) Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again. You might also want to try burning at 6x or 8x. If that doesn't work then use a lens cleaning disc on that burner. Link to comment Share on other sites More sharing options...
coolhand Posted November 20, 2009 Author Share Posted November 20, 2009 I 08:26:58 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H54L 1.00 (D (ATA)I 08:26:58 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x, 6x, 8x) I 08:26:58 Write Speed: 1x W 08:26:58 Write Speed Miscompare! - Wanted: 1,385 KB/s (1x), Got: 5,540 KB/s (4x) Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished) and try again. You might also want to try burning at 6x or 8x. If that doesn't work then use a lens cleaning disc on that burner. Thanks, upped to 6x and perfect burn. I will update firmware as well. I appreciate your time. Link to comment Share on other sites More sharing options...
Recommended Posts