Datsun620 Posted November 28, 2009 Posted November 28, 2009 Hey first off I'd like to give thanks for everyone chiming in to help with this one. Heres my problem I have a .iso image I want to burn no faster then 2.4x (I selected to burn at that speed) When I start the burn process after some time it says in the log box that (wanted: 2.4x ---- got: 4.0x. Thats my problem I hope someone can help with this. Thanks. and heres my dvd drive: LG GH20LP20 F/W 1.02
spinningwheel Posted November 28, 2009 Posted November 28, 2009 If you had posted the full log you would have seen the speeds that the burner recognizes as the burn speeds for your media according to it's firmware. Since it burns at 4X it is probably the lowest supported speed and ImgBurn cannot set a speed that the burner will not recognize.
Datsun620 Posted November 28, 2009 Author Posted November 28, 2009 If you had posted the full log you would have seen the speeds that the burner recognizes as the burn speeds for your media according to it's firmware. Since it burns at 4X it is probably the lowest supported speed and ImgBurn cannot set a speed that the burner will not recognize. ok. Is there a way to view the history of my session logs? I don't feel like waisting another dl dvd to produce a session log.
Cynthia Posted November 28, 2009 Posted November 28, 2009 The ImgBurn log is saved on your hard disk, as long as you have the option 'Save the Log' enabled in the settings. This option is enabled by default when you install the program. Use the menu system to go to the location where ImgBurn saves the log file. First select 'Help' and then 'ImgBurn Logs...'.
Datsun620 Posted November 28, 2009 Author Posted November 28, 2009 The ImgBurn log is saved on your hard disk, as long as you have the option 'Save the Log' enabled in the settings. This option is enabled by default when you install the program. Use the menu system to go to the location where ImgBurn saves the log file. First select 'Help' and then 'ImgBurn Logs...'. ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Saturday, 28 November 2009, 03:53:10 ; \\****************************************// ; ; I 02:59:22 ImgBurn Version 2.5.0.0 started! I 02:59:22 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 02:59:22 Total Physical Memory: 250,712 KB - Available: 43,148 KB I 02:59:25 Initialising SPTI... I 02:59:25 Searching for SCSI / ATAPI devices... W 02:59:25 No devices detected! I 03:00:08 Searching for SCSI / ATAPI devices... W 03:00:08 No devices detected! I 03:08:48 Searching for SCSI / ATAPI devices... E 03:09:12 Device->Initialise() Failed! E 03:09:12 Device: [0:0:0] (D:) E 03:09:13 This drive will not be visible in the program. I 03:09:13 Found 1 DVD±RW/RAM! I 03:10:33 Operation Started! I 03:10:33 Source File: C:\users\matt\Desktop\untitled folder\mvl-l4d2.dvd I 03:10:33 Source File Sectors: 3,827,488 (MODE1/2048) I 03:10:33 Source File Size: 7,838,695,424 bytes I 03:10:33 Source File Volume Identifier: DVD_ROM I 03:10:33 Source File Volume Set Identifier: f27dc000MS UDFBridge I 03:10:33 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 03:10:33 Source File Implementation Identifier: Microsoft CDIMAGE UDF I 03:10:33 Source File File System(s): ISO9660, UDF (1.50) I 03:10:33 Destination Device: [2:1:0] HL-DT-ST DVD-RAM GH20LP20 1.02 (E:) I 03:10:33 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 4x) I 03:10:33 Destination Media Sectors: 4,173,824 I 03:10:33 Write Mode: DVD I 03:10:33 Write Type: DAO I 03:10:33 Write Speed: 2.4x I 03:10:33 Link Size: Auto I 03:10:33 Lock Volume: Yes I 03:10:33 Test Mode: No I 03:10:33 OPC: No I 03:10:33 BURN-Proof: Enabled W 03:10:33 DeviceIoControl(IOCTL_STORAGE_MCN_CONTROL) Failed! - Media change notification has NOT been disabled. W 03:10:33 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x) I 03:10:33 Book Type Setting: N/A I 03:10:33 User Specified L0 Data Zone Capacity: 1,913,760 I 03:10:34 Set L0 Data Zone Capacity Succeeded! I 03:10:34 Filling Buffer... (20 MB) I 03:10:36 Writing LeadIn... I 03:11:12 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 03:11:12 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 03:11:12 Writing Layer 0... (LBA: 0 - 1913759) I 03:23:49 Writing Layer 1... (LBA: 1913760 - 3827487) I 03:35:51 Synchronising Cache... I 03:36:16 Closing Track... I 03:36:52 Finalising Disc... I 03:37:07 Exporting Graph Data... I 03:37:09 Graph Data File: C:\users\matt\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GH20LP20_1.02_SATURDAY-NOVEMBER-28-2009_3-10_AM_MKM-001-00_2.4x.ibg I 03:37:09 Export Successfully Completed! I 03:37:09 Operation Successfully Completed! - Duration: 00:26:31 I 03:37:09 Average Write Rate: 5,179 KB/s (3.7x) - Maximum Write Rate: 6,008 KB/s (4.3x) I 03:37:10 Cycling Tray before Verify... W 03:37:20 Waiting for device to become ready... I 03:37:33 Device Ready! I 03:37:41 Operation Started! I 03:37:42 Source Device: [2:1:0] HL-DT-ST DVD-RAM GH20LP20 1.02 (E:) I 03:37:42 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 4x) I 03:37:42 Image File: C:\users\matt\Desktop\untitled folder\mvl-l4d2.dvd I 03:37:42 Image File Sectors: 3,827,488 (MODE1/2048) I 03:37:43 Image File Size: 7,838,695,424 bytes I 03:37:43 Image File Volume Identifier: DVD_ROM I 03:37:43 Image File Volume Set Identifier: f27dc000MS UDFBridge I 03:37:43 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM) I 03:37:43 Image File Implementation Identifier: Microsoft CDIMAGE UDF I 03:37:44 Image File File System(s): ISO9660, UDF (1.50) I 03:37:44 Read Speed (Data/Audio): MAX / MAX I 03:37:47 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487) I 03:37:48 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487) I 03:37:49 Verifying Layer 0... (LBA: 0 - 1913759) I 03:43:57 Verifying Layer 1... (LBA: 1913760 - 3827487) I 03:49:38 Exporting Graph Data... I 03:49:39 Graph Data File: C:\users\matt\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GH20LP20_1.02_SATURDAY-NOVEMBER-28-2009_3-10_AM_MKM-001-00_2.4x.ibg I 03:49:39 Export Successfully Completed! I 03:49:39 Operation Successfully Completed! - Duration: 00:11:55 I 03:49:39 Average Verify Rate: 10,796 KB/s (7.8x) - Maximum Verify Rate: 19,978 KB/s (14.4x) I 03:53:07 Close Request Acknowledged I 03:53:07 Closing Down... I 03:53:08 Shutting down SPTI... I 03:53:09 ImgBurn closed!
Cynthia Posted November 28, 2009 Posted November 28, 2009 I 03:10:33 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 4x) As stated before, you can only burn it as low as 4x with that combination of media/firmware.
Datsun620 Posted November 28, 2009 Author Posted November 28, 2009 I 03:10:33 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 4x) As stated before, you can only burn it as low as 4x with that combination of media/firmware. Do you know of any updates on firmware for this device? I've searched Firmware HQ theres nothing on this LG burner.
Cynthia Posted November 28, 2009 Posted November 28, 2009 Why is it important to burn at 2.4x? Can't you play the one that you burned at 4x?
Datsun620 Posted November 28, 2009 Author Posted November 28, 2009 Why is it important to burn at 2.4x? Can't you play the one that you burned at 4x? They wont read when burned at such a speed. at least not on my Hitachi.
mmalves Posted November 28, 2009 Posted November 28, 2009 Since the verify went OK the disc is good and should play fine. If it doesn't then you should read this -> http://forum.imgburn.com/index.php?showtopic=12200
Datsun620 Posted November 28, 2009 Author Posted November 28, 2009 Since the verify went OK the disc is good and should play fine. If it doesn't then you should read this -> http://forum.imgburn.com/index.php?showtopic=12200 We've determined its the firmware already now where can I get the update for this drive?
Datsun620 Posted November 28, 2009 Author Posted November 28, 2009 (edited) At http://www.google.com/ if there are any Can't seem to find any for GH20LP20. but, there is firmware for the GH22LP20 they look exactly the same... so am I SOL on this? Edited November 28, 2009 by Datsun620
Cynthia Posted November 28, 2009 Posted November 28, 2009 so am I SOL on this? Yes. I couldn't find any later firmware either.
Datsun620 Posted November 28, 2009 Author Posted November 28, 2009 so am I SOL on this? Yes. I couldn't find any later firmware either. Well that sucks! Who wants to buy a dl dvd burner?
spinningwheel Posted November 29, 2009 Posted November 29, 2009 Who wants to buy a dl dvd burner? Browning Ferris Industries?
Datsun620 Posted November 30, 2009 Author Posted November 30, 2009 Who wants to buy a dl dvd burner? Browning Ferris Industries? Browning Ferris Industries? whats that?
spinningwheel Posted November 30, 2009 Posted November 30, 2009 Browning Ferris Industries? whats that? http://en.wikipedia.org/wiki/Browning-Ferris_Industries
Datsun620 Posted December 1, 2009 Author Posted December 1, 2009 Browning Ferris Industries? whats that? http://en.wikipedia.org/wiki/Browning-Ferris_Industries For sure..
Datsun620 Posted December 4, 2009 Author Posted December 4, 2009 Decided to try another game since the first one I tried didn't pass verification. Doesn't read in the box either. These backups that I made don't even seem to spin like the other originals...?
Recommended Posts