Slowing burn speed down!

Datsun620 · November 28, 2009

Hey first off I'd like to give thanks for everyone chiming in to help with this one. Heres my problem I have a .iso image I want to burn no faster then 2.4x (I selected to burn at that speed) When I start the burn process after some time it says in the log box that (wanted: 2.4x ---- got: 4.0x. Thats my problem I hope someone can help with this.

Thanks.

and heres my dvd drive: LG GH20LP20 F/W 1.02

**spinningwheel** · November 28, 2009

If you had posted the full log you would have seen the speeds that the burner recognizes as the burn speeds for your media according to it's firmware. Since it burns at 4X it is probably the lowest supported speed and ImgBurn cannot set a speed that the burner will not recognize.

Datsun620 · November 28, 2009

If you had posted the full log you would have seen the speeds that the burner recognizes as the burn speeds for your media according to it's firmware. Since it burns at 4X it is probably the lowest supported speed and ImgBurn cannot set a speed that the burner will not recognize.

ok. Is there a way to view the history of my session logs? I don't feel like waisting another dl dvd to produce a session log.

**Cynthia** · November 28, 2009

The ImgBurn log is saved on your hard disk, as long as you have the option 'Save the Log' enabled in the settings. This option is enabled by default when you install the program.

Use the menu system to go to the location where ImgBurn saves the log file. First select 'Help' and then 'ImgBurn Logs...'.

Datsun620 · November 28, 2009

The ImgBurn log is saved on your hard disk, as long as you have the option 'Save the Log' enabled in the settings. This option is enabled by default when you install the program.

Use the menu system to go to the location where ImgBurn saves the log file. First select 'Help' and then 'ImgBurn Logs...'.

; //****************************************\\

; ImgBurn Version 2.5.0.0 - Log

; Saturday, 28 November 2009, 03:53:10

; \\****************************************//

;

I 02:59:22 ImgBurn Version 2.5.0.0 started!

I 02:59:22 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 02:59:22 Total Physical Memory: 250,712 KB - Available: 43,148 KB

I 02:59:25 Initialising SPTI...

I 02:59:25 Searching for SCSI / ATAPI devices...

W 02:59:25 No devices detected!

I 03:00:08 Searching for SCSI / ATAPI devices...

W 03:00:08 No devices detected!

I 03:08:48 Searching for SCSI / ATAPI devices...

E 03:09:12 Device->Initialise() Failed!

E 03:09:12 Device: [0:0:0] (D:)

E 03:09:13 This drive will not be visible in the program.

I 03:09:13 Found 1 DVD±RW/RAM!

I 03:10:33 Operation Started!

I 03:10:33 Source File: C:\users\matt\Desktop\untitled folder\mvl-l4d2.dvd

I 03:10:33 Source File Sectors: 3,827,488 (MODE1/2048)

I 03:10:33 Source File Size: 7,838,695,424 bytes

I 03:10:33 Source File Volume Identifier: DVD_ROM

I 03:10:33 Source File Volume Set Identifier: f27dc000MS UDFBridge

I 03:10:33 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 03:10:33 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 03:10:33 Source File File System(s): ISO9660, UDF (1.50)

I 03:10:33 Destination Device: [2:1:0] HL-DT-ST DVD-RAM GH20LP20 1.02 (E:)

I 03:10:33 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 4x)

I 03:10:33 Destination Media Sectors: 4,173,824

I 03:10:33 Write Mode: DVD

I 03:10:33 Write Type: DAO

I 03:10:33 Write Speed: 2.4x

I 03:10:33 Link Size: Auto

I 03:10:33 Lock Volume: Yes

I 03:10:33 Test Mode: No

I 03:10:33 OPC: No

I 03:10:33 BURN-Proof: Enabled

W 03:10:33 DeviceIoControl(IOCTL_STORAGE_MCN_CONTROL) Failed! - Media change notification has NOT been disabled.

W 03:10:33 Write Speed Miscompare! - Wanted: 3,324 KB/s (2.4x), Got: 5,540 KB/s (4x)

I 03:10:33 Book Type Setting: N/A

I 03:10:33 User Specified L0 Data Zone Capacity: 1,913,760

I 03:10:34 Set L0 Data Zone Capacity Succeeded!

I 03:10:34 Filling Buffer... (20 MB)

I 03:10:36 Writing LeadIn...

I 03:11:12 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 03:11:12 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 03:11:12 Writing Layer 0... (LBA: 0 - 1913759)

I 03:23:49 Writing Layer 1... (LBA: 1913760 - 3827487)

I 03:35:51 Synchronising Cache...

I 03:36:16 Closing Track...

I 03:36:52 Finalising Disc...

I 03:37:07 Exporting Graph Data...

I 03:37:09 Graph Data File: C:\users\matt\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GH20LP20_1.02_SATURDAY-NOVEMBER-28-2009_3-10_AM_MKM-001-00_2.4x.ibg

I 03:37:09 Export Successfully Completed!

I 03:37:09 Operation Successfully Completed! - Duration: 00:26:31

I 03:37:09 Average Write Rate: 5,179 KB/s (3.7x) - Maximum Write Rate: 6,008 KB/s (4.3x)

I 03:37:10 Cycling Tray before Verify...

W 03:37:20 Waiting for device to become ready...

I 03:37:33 Device Ready!

I 03:37:41 Operation Started!

I 03:37:42 Source Device: [2:1:0] HL-DT-ST DVD-RAM GH20LP20 1.02 (E:)

I 03:37:42 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-001-00) (Speeds: 4x)

I 03:37:42 Image File: C:\users\matt\Desktop\untitled folder\mvl-l4d2.dvd

I 03:37:42 Image File Sectors: 3,827,488 (MODE1/2048)

I 03:37:43 Image File Size: 7,838,695,424 bytes

I 03:37:43 Image File Volume Identifier: DVD_ROM

I 03:37:43 Image File Volume Set Identifier: f27dc000MS UDFBridge

I 03:37:43 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 03:37:43 Image File Implementation Identifier: Microsoft CDIMAGE UDF

I 03:37:44 Image File File System(s): ISO9660, UDF (1.50)

I 03:37:44 Read Speed (Data/Audio): MAX / MAX

I 03:37:47 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 03:37:48 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 03:37:49 Verifying Layer 0... (LBA: 0 - 1913759)

I 03:43:57 Verifying Layer 1... (LBA: 1913760 - 3827487)

I 03:49:38 Exporting Graph Data...

I 03:49:39 Graph Data File: C:\users\matt\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVD-RAM_GH20LP20_1.02_SATURDAY-NOVEMBER-28-2009_3-10_AM_MKM-001-00_2.4x.ibg

I 03:49:39 Export Successfully Completed!

I 03:49:39 Operation Successfully Completed! - Duration: 00:11:55

I 03:49:39 Average Verify Rate: 10,796 KB/s (7.8x) - Maximum Verify Rate: 19,978 KB/s (14.4x)

I 03:53:07 Close Request Acknowledged

I 03:53:07 Closing Down...

I 03:53:08 Shutting down SPTI...

I 03:53:09 ImgBurn closed!

**Cynthia** · November 28, 2009

I 03:10:33 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 4x)

As stated before, you can only burn it as low as 4x with that combination of media/firmware.

Datsun620 · November 28, 2009

I 03:10:33 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00) (Speeds: 4x)

As stated before, you can only burn it as low as 4x with that combination of media/firmware.

Do you know of any updates on firmware for this device? I've searched Firmware HQ theres nothing on this LG burner.

**Cynthia** · November 28, 2009

Why is it important to burn at 2.4x? Can't you play the one that you burned at 4x?

Datsun620 · November 28, 2009

Why is it important to burn at 2.4x? Can't you play the one that you burned at 4x?

They wont read when burned at such a speed. at least not on my Hitachi.

**mmalves** · November 28, 2009

Since the verify went OK the disc is good and should play fine. If it doesn't then you should read this -> http://forum.imgburn.com/index.php?showtopic=12200

Datsun620 · November 28, 2009

Since the verify went OK the disc is good and should play fine. If it doesn't then you should read this -> http://forum.imgburn.com/index.php?showtopic=12200

We've determined its the firmware already now where can I get the update for this drive?

**mmalves** · November 28, 2009

At http://www.google.com/ if there are any :rolleyes:

Datsun620 · November 28, 2009

At http://www.google.com/ if there are any

Can't seem to find any for GH20LP20. but, there is firmware for the GH22LP20 they look exactly the same...

so am I SOL on this?

Edited November 28, 2009 by Datsun620

**Cynthia** · November 28, 2009

so am I SOL on this?

Yes. I couldn't find any later firmware either.

Datsun620 · November 28, 2009

so am I SOL on this?

Yes. I couldn't find any later firmware either.

Well that sucks!

Who wants to buy a dl dvd burner?

**spinningwheel** · November 29, 2009

Who wants to buy a dl dvd burner?

Browning Ferris Industries?

=)) =))

Datsun620 · November 30, 2009

Who wants to buy a dl dvd burner?

Browning Ferris Industries?

Browning Ferris Industries? whats that?

**spinningwheel** · November 30, 2009

Browning Ferris Industries? whats that?

http://en.wikipedia.org/wiki/Browning-Ferris_Industries

Datsun620 · December 1, 2009

Browning Ferris Industries? whats that?

http://en.wikipedia.org/wiki/Browning-Ferris_Industries

For sure..

Datsun620 · December 4, 2009

Decided to try another game since the first one I tried didn't pass verification.

Doesn't read in the box either. These backups that I made don't even seem to spin like the other originals...?

Sign In

Slowing burn speed down!

Recommended Posts

Datsun620

spinningwheel

Datsun620

Cynthia

Datsun620

Cynthia

Datsun620

Cynthia

Datsun620

mmalves

Datsun620

mmalves

Datsun620

Cynthia

Datsun620

spinningwheel

Datsun620

spinningwheel

Datsun620

Datsun620

Create an account or sign in to comment

Create an account

Sign in

Browse

Activity

Important Information