jeniknf Posted November 29, 2009 Share Posted November 29, 2009 Hi I am having problems burning a 360 game using imgburn can someone please help me. the error i get is I/O Error! Device: [1:0:0] Slimtype DVDRW SOSW-833S VRS2 (E:)(ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 00 00 00 00 00 20 00 Interpretation: Write (10)- Sectors: 0-31 Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 27 00 00 00 00 00 Interpretation: Write Protected and heres the stuff in the right hand box Slimtype DVDRW SOSW-833S VRS2 (ATA) Current Profile: DVD+R DL Disc Information: Status: Empty Erasable: No Free Sectors: 4,173,824 Free Space: 8,547,991,552 bytes Free Time: 927:32:74 (MM:SS:FF) Supported Write Speeds: 2.4x DVD±R DL Boundary Information: L0 Data Zone Capacity: 2,086,912 Changeable: Yes Physical Format Information (ADIP): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Physical Format Information (Last Recorded): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,283,519 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 5,540 KB/s (4x) - WS: 3,324 KB/s (2.4x) Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 29, 2009 Share Posted November 29, 2009 Either that's your drives way of saying it doesn't support the RITEK-S04-66 dye or you've got some sort of packet writing software installed that's preventing any other tools from writing to the disc. My guess is the first one is true - that drive is old now, much older than the 'RITEK-S04-66' dye. Get some Verbatim 2.4x (MKM-001-00 dye) discs instead or buy a new drive. Link to comment Share on other sites More sharing options...
jeniknf Posted November 29, 2009 Author Share Posted November 29, 2009 Either that's your drives way of saying it doesn't support the RITEK-S04-66 dye or you've got some sort of packet writing software installed that's preventing any other tools from writing to the disc. My guess is the first one is true - that drive is old now, much older than the 'RITEK-S04-66' dye. Get some Verbatim 2.4x (MKM-001-00 dye) discs instead or buy a new drive. i have 2 other disc drives so i will try that first but if not you are saying the verbatim 2.4 will work? Link to comment Share on other sites More sharing options...
jeniknf Posted November 29, 2009 Author Share Posted November 29, 2009 i switched disc drives and burning started and made it to 47 percent then had an error and shut down heres what was in the right panel HL-DT-ST DVDRAM GMA-4082N HV02 (ATA) Current Profile: DVD+R DL Disc Information: Status: Incomplete Erasable: No Sessions: 1 Free Sectors: 2,015,376 Free Space: 4,127,490,048 bytes Free Time: 447:53:51 (MM:SS:FF) Supported Write Speeds: 2.4x DVD±R DL Boundary Information: L0 Data Zone Capacity: 1,913,760 Changeable: No Disc Control Blocks Information: HL-DT-ST GMA-4082N Physical Format Information (Last Recorded): Disc ID: RITEK-S04-66 Book Type: DVD+R DL Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 16,580,607 Last Physical Sector in Layer 0: 2,110,367 Performance (Write Speed): Descriptor 1... -> B0: 0x02, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 3827519 (0x003A673F) -> RS: 2,284 KB/s (1.7x) - WS: 3,324 KB/s (2.4x) Link to comment Share on other sites More sharing options...
Cynthia Posted November 29, 2009 Share Posted November 29, 2009 i switched disc drives and burning started and made it to 47 percent then had an error and shut down heres what was in the right panel Please post what you see in the log window instead. Link to comment Share on other sites More sharing options...
jeniknf Posted November 29, 2009 Author Share Posted November 29, 2009 i switched disc drives and burning started and made it to 47 percent then had an error and shut down heres what was in the right panel Please post what you see in the log window instead. i dont see the log window ill reburn and put the error up on here thanks so much for taking the time to help me Link to comment Share on other sites More sharing options...
mmalves Posted November 29, 2009 Share Posted November 29, 2009 HL-DT-ST DVDRAM GMA-4082N HV02 (ATA) That burner is just as old as the other one and also doesn't support the blanks you're using. Get the Verbatim 2.4x DVD+R DL blanks as LUK said above or get a new burner that supports your blanks. By the way, you can find the previous logs in ImgBurn's Help menu. Link to comment Share on other sites More sharing options...
LIGHTNING UK! Posted November 29, 2009 Share Posted November 29, 2009 The log window is supposed to be left open all the time. Reopen it via the 'View' menu. Link to comment Share on other sites More sharing options...
Recommended Posts