pavlakos1 Posted December 1, 2009 Posted December 1, 2009 Ok, i ve trying for hours now to burn an windows 7 iso on a RW dvd. Am doing the procedure as instructed by one topic here. Everything goes normal the situation gets completed i even hear the sound that informs us that the situation is complete. Then i browse my disc drive and there is absolutely nothing written on the disc? what is wrong? I verify after and the status are : DISC EMPTY. What is happening?? why?
jeff_nz Posted December 1, 2009 Posted December 1, 2009 Please post your log. You can find the logs from the ImgBurn Help menu > ImgBurn Logs... Select the log for that particular session above and copy & paste it into your post.
pavlakos1 Posted December 1, 2009 Author Posted December 1, 2009 give me a moment, am writting another dvd as we speak i believe it will have the same problem again, but i will post the log in the next 5 mins
LIGHTNING UK! Posted December 1, 2009 Posted December 1, 2009 Just copy + paste it out of the log window. Do you verify your burns? If you do then there shouldn't be any problem - because if there was, it would be obvious.
pavlakos1 Posted December 1, 2009 Author Posted December 1, 2009 em on the log files, are ALL the log files from all of my burns. Shall i paste all the log file?
LIGHTNING UK! Posted December 1, 2009 Posted December 1, 2009 No, either post what's in the log window after your last burn (open it via the view menu if you've closed it down - naughty person!) or just copy + paste the top section from the log file. You should be able to tell where each new session starts as there are a few separator lines (and a date).
pavlakos1 Posted December 1, 2009 Author Posted December 1, 2009 (edited) In this session i checked verify and now its verifying. I can hear the disc spinning and nothing else. is this normal? (its spinning for about 4 minutes now..) shall i wait and after post the log? i mean wait till the verifying is complete Also the "complete" "Device Buffer" "image buffer" bar isnt moving at all and on the verify rate it says unknown and also same in the time remaining. Edited December 1, 2009 by pavlakos1
pavlakos1 Posted December 1, 2009 Author Posted December 1, 2009 ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; ÔåôÜñôç, 02 ÄåêÝìâñéïò 2009, 00:17:07 ; \\****************************************// ; ; I 00:16:31 ImgBurn Version 2.5.0.0 started! I 00:16:31 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6001 : Service Pack 1) I 00:16:31 Total Physical Memory: 4.191.740 KB - Available: 3.047.356 KB W 00:16:31 SPTD can have a detrimental effect on drive performance. I 00:16:31 Initialising SPTI... I 00:16:31 Searching for SCSI / ATAPI devices... I 00:16:31 Found 1 DVD±RW/RAM! I 00:17:07 Close Request Acknowledged I 00:17:07 Closing Down... I 00:17:07 Shutting down SPTI... I 00:17:07 ImgBurn closed! This is the last log. al though i explained before what is happening now..which its still trying to verify
LIGHTNING UK! Posted December 1, 2009 Posted December 1, 2009 Yeah that's an empty log. (where you've simply opened and closed the program) We need one that actually shows us that you're doing something. Just copy + paste everything that's in the log window of the ImgBurn instance you have open at the moment. Oh and no it's not normal for the verify to not have actually started and the drive to just be spinning. What's the message in the statusbar down the bottom of the main window?
Recommended Posts