havok1579 Posted December 4, 2009 Posted December 4, 2009 I started burning a DVD+R DL disc and soon into the burning i got the device not ready (medium not present). Now I cannot burn anything because of the same error. The only weird thing is other programs are working just fine, I have tried reinstalling imgburn and my dvd drive and everything but nothing has worked. Any help would be much appreciated
Cynthia Posted December 4, 2009 Posted December 4, 2009 Hi and welcome to the forum, havok1579! Can you post a log of that failed burn? You'll find it here: Main menu -> Help -> ImgBurn Logs
havok1579 Posted December 4, 2009 Author Posted December 4, 2009 (edited) Hi and welcome to the forum, havok1579! Can you post a log of that failed burn? You'll find it here: Main menu -> Help -> ImgBurn Logs I no longer have it.. When I start imgburn without a disc I come up with the device not ready error, but with a disc i don't get it. Though I am afraid im going to create another coaster cause it will fail again. I have burned with other programs and successfully verified with imgburn. I prefer imgburn so I want to be able to use it without this problem. I have a log of when i verified it though, hopefully that will help. I 21:50:19 ImgBurn Version 2.5.0.0 started! I 21:50:19 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 21:50:19 Total Physical Memory: 514,096 KB - Available: 142,096 KB W 21:50:19 Drive D:\ (FAT32) does not support single files > 4 GB in size. W 21:50:19 SPTD can have a detrimental effect on drive performance. I 21:50:19 Initialising SPTI... I 21:50:19 Searching for SCSI / ATAPI devices... I 21:50:20 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM! I 21:51:12 Operation Started! I 21:51:12 Source Device: [0:0:0] HL-DT-ST DVDRAM GMA-4082N HQ04 (E:) (ATA) I 21:51:12 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: RITEK-D01-01) (Speeds: 2.4x) I 21:51:12 Image File: C:\Documents and Settings\Collin.LAPTOP\Desktop\Xbox 360 Games\Oblivion Disc 1\vortex-ogoty.dvd I 21:51:12 Image File Sectors: 3,825,631 (MODE1/2048) I 21:51:12 Image File Size: 7,834,892,288 bytes I 21:51:12 Image File Volume Identifier: XBOX360 I 21:51:12 Image File Volume Set Identifier: 33479a57 I 21:51:12 Image File Implementation Identifier: Daikin U.S. Comtec Lab I 21:51:12 Image File File System(s): ISO9660, UDF (1.02) I 21:51:12 Read Speed (Data/Audio): MAX / MAX I 21:51:12 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3825630) I 21:51:12 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3825630) I 21:51:12 Verifying Layer 0... (LBA: 0 - 1913759) I 22:07:51 Verifying Layer 1... (LBA: 1913760 - 3825630) I 22:24:44 Exporting Graph Data... I 22:24:44 Graph Data File: C:\Documents and Settings\Collin.LAPTOP\Application Data\ImgBurn\Graph Data Files\HL-DT-ST_DVDRAM_GMA-4082N_HQ04_THURSDAY-DECEMBER-03-2009_9-51_PM_RITEK-D01-01.ibg I 22:24:44 Export Successfully Completed! I 22:24:44 Operation Successfully Completed! - Duration: 00:33:32 I 22:24:44 Average Verify Rate: 3,802 KB/s (2.7x) - Maximum Verify Rate: 9,005 KB/s (6.5x) I 22:24:48 Close Request Acknowledged I 22:24:48 Closing Down... I 22:24:48 Shutting down SPTI... I 22:24:48 ImgBurn closed! Edited December 4, 2009 by havok1579
mmalves Posted December 5, 2009 Posted December 5, 2009 Device Not Ready (Medium Not Present) isn't an error: it's your drive saying that there's no disc inside, or at least it thinks so. Did you uninstall/reinstall ImgBurn? If you didn't then the burn log should be there. We need to look at it in order to see if there were indeed burning problems or not. Since the verify turned out fine the disc should be good for use.
havok1579 Posted December 5, 2009 Author Posted December 5, 2009 Device Not Ready (Medium Not Present) isn't an error: it's your drive saying that there's no disc inside, or at least it thinks so. Did you uninstall/reinstall ImgBurn? If you didn't then the burn log should be there. We need to look at it in order to see if there were indeed burning problems or not. Since the verify turned out fine the disc should be good for use. Yeah i did reinstall it, Ill try burning a disc and see if i get a error. The only thing I know for sure is that it was an I/O error when the problem happened during the burn.
Recommended Posts