Jump to content

Recommended Posts

Posted

Here is the error message I keep getting. Generally it will get about half way then give me a write address error but lately I can't even get to 1 percent.

 

I 20:29:42 ImgBurn Version 1.3.0.0 started!

I 20:29:42 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 20:29:42 Initialising SPTI...

I 20:29:42 Searching for SCSI / ATAPI devices...

I 20:29:43 Found 1 DVD?RW!

I 20:30:30 Operation Started!

I 20:30:30 Source File: C:\CBM.ISO

I 20:30:30 Source File Sectors: 2,217,253 (MODE1/2048)

I 20:30:30 Source File Size: 4,540,934,144 bytes

I 20:30:30 Source File Volume Identifier: CBM

I 20:30:30 Source File Implementation Identifier: DVD Shrink

I 20:30:30 Source File UDF Revision: 1.02

I 20:30:30 Destination Device: [0:0:0] PHILIPS DVD+-RW DVD8631 GD30 (D:) (ATA)

I 20:30:30 Destination Media Type: DVD+R (Disc ID: YUDEN000-T02-00) (Speeds: 2.4x, 4x, 8x, 12x, 16x)

I 20:30:30 Destination Media Sectors: 2,295,104

I 20:30:30 Write Mode: DVD

I 20:30:30 Write Type: DAO

I 20:30:30 Write Speed: 4x

I 20:30:30 Link Size: Auto

I 20:30:30 Test Mode: No

I 20:30:30 BURN-Proof: Enabled

I 20:30:30 Filling Buffer...

I 20:30:30 Writing LeadIn...

I 20:30:37 Writing Image...

W 20:30:40 Failed to Write Sectors 4032 - 4063 - Invalid Address For Write

W 20:30:40 Retrying (1 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (2 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (3 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (4 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (5 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (6 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (7 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (8 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (9 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (10 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (11 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (12 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (13 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (14 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (15 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (16 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (17 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (18 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (19 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:40 Retrying (20 of 20)...

W 20:30:40 Retry Failed - Invalid Address For Write

W 20:30:54 Retrying (21)...

W 20:30:54 Retry Failed - Invalid Address For Write

W 20:30:55 Retrying (22)...

W 20:30:55 Retry Failed - Invalid Address For Write

E 20:30:56 Failed to Write Sectors 4032 - 4063 - Invalid Address For Write

E 20:30:56 Next Writable Address: 3760

I 20:30:56 Synchronising Cache...

I 20:30:57 Closing Track...

I 20:30:59 Finalising Disc...

W 20:31:07 Potential 'WaitImmediateIO' Deferred Error - Write Error

E 20:31:11 Finalise Disc Failed! - Reason: Session Fixation Error - Incomplete Track in Session

E 20:31:11 Failed to Write Image!

E 20:31:11 Operation Failed! - Duration: 00:00:41

I 20:31:11 Average Write Rate: 424 KB/s (0.3x) - Maximum Write Rate: 424 KB/s (0.3x)

Posted

Wasn?t there a fella here a few weeks back who had problems with the same drive? I only remember because this drive can be cross-flashed as a BenQ1620 which apparently (may or may not) fixes it.

Posted

I have burned hundreds of disks with version 1.2 and never had an issue. Installed 1.3 and coasted 3 in a row have no idea why. Used the same disk I always have with a Lite-On SHM-165P6S RTL any help would be appreciated.... HELP

Posted

The thread LFC mentions was my original post when I had the Philips 8631 that was giving me problems. Apparently, the Philips 8600 series can be cross-flashed to a BenQ 1620, while the Philips 8700 series can be cross-flashed to a BenQ 1640 (which is what I did when I got my new drive). I should have tried to cross-flash the "defective" Philips 8631 to a BenQ 1620 to see if it improved things any. However, if I would have done that and still had problems, it would have voided the warranty and I wouldn't have been able to get the drive replaced.

Posted

Happy one, please explain why you're calling these discs coasters.

 

Do you have a log to show us or anything?

 

Do you get the program to verify what it burns? If not, now might be a good time to start doing so.

Posted

Happy one, please explain why you're calling these discs coasters.

 

Do you have a log to show us or anything?

 

Do you get the program to verify what it burns? If not, now might be a good time to start doing so.

 

Thanks for the quick response I will try and get the log to you. I just never had any issues with 1.2 and started 1.3 and havent gotten a good disk yet.

Posted
Well I can't think for the life of me what it could be, that's why I'm hoping the log will give us more info.

 

Don't forget about the verify part too please.

 

I tried it again and it worked fine. I did use the verify option the only thing I can think of was that I had AnyDVD running I turned it off because ImgBurn told me to but I probably needed to reboot. I did a soft reboot but probably needed to do a hard reboot before I burned them. All is fine now. THank you for your help. I will see if my Paypal account is still working and get you a donation to this great project and all your hard work.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.