Problem burning DL (xbox game)

[PenguinBarber]

Ok so I just made my fourth coaster in a row and decided I need help... and also some good advices regardning my burning issues.

 

First two coasters was done using a different software so forget all about that (didnt burn second layer), third attempt (first one with imgburn) went to 7% before calling it quits so I figured bad media.

 

Went ahead and updated writer firmware (samsung sh-s202J) just in case, rebooted and this time I actually got to around 93%, sigh.

Img file should be clean.

 

Media is looking sketchy tho, maybe burning at 8x was a mistake.. log attached.

 

 

 

 

I have a feeling I'll be flamed for this as theres obviously some thread I didnt read...

 

Hmm log file..

 

I 01:23:24 ImgBurn Version 2.5.0.0 started!

I 01:23:24 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)

I 01:23:24 Total Physical Memory: 2 096 428 KB - Available: 1 583 712 KB

W 01:23:24 Drive I:\ (FAT32) does not support single files > 4 GB in size.

W 01:23:24 SPTD can have a detrimental effect on drive performance.

I 01:23:24 Initialising SPTI...

I 01:23:24 Searching for SCSI / ATAPI devices...

I 01:23:24 Found 3 DVD-ROMs and 1 DVD±RW/RAM!

I 01:25:24 Operation Started!

I 01:25:24 Source File: C:\Documents and Settings\XXXXXXXXXXXXXX\Mina dokument\Downloads\MX.Vs.ATV.Reflex.USA.RF.XBOX360-Lagartija\lagartija-mxvsatvreflex\lagartija-mxvsatvreflex.dvd

I 01:25:24 Source File Sectors: 3 827 488 (MODE1/2048)

I 01:25:24 Source File Size: 7 838 695 424 bytes

I 01:25:24 Source File Volume Identifier: DVD_ROM

I 01:25:24 Source File Volume Set Identifier: fd244000MS UDFBridge

I 01:25:24 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 01:25:24 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 01:25:24 Source File File System(s): ISO9660; UDF (1.50)

I 01:25:24 Destination Device: [0:0:0] TSSTcorp CDDVDW SH-S202J SB03 (F:) (ATA)

I 01:25:24 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 4x; 6x; 8x)

I 01:25:24 Destination Media Sectors: 4 173 824

I 01:25:24 Write Mode: DVD

I 01:25:24 Write Type: DAO

I 01:25:24 Write Speed: 8x

I 01:25:24 Link Size: Auto

I 01:25:24 Lock Volume: Yes

I 01:25:24 Test Mode: No

I 01:25:24 OPC: No

I 01:25:24 BURN-Proof: Enabled

I 01:25:24 Book Type Setting: DVD-ROM

I 01:25:24 Optimal L0 Data Zone Capacity: 1 913 760

I 01:25:24 Optimal L0 Data Zone Method: Copied From Original Disc

I 01:26:01 Set L0 Data Zone Capacity Succeeded!

I 01:26:01 Filling Buffer... (40 MB)

I 01:26:03 Writing LeadIn...

I 01:26:05 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 01:26:05 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 01:26:05 Writing Layer 0... (LBA: 0 - 1913759)

I 01:32:23 Writing Layer 1... (LBA: 1913760 - 3827487)

W 01:38:41 Failed to Write Sectors 3565856 - 3565887 - Reason: Write Error

W 01:38:41 Retrying (1 of 20)...

W 01:38:41 Retry Failed - Reason: Invalid Address For Write

W 01:38:41 Retrying (2 of 20)...

W 01:38:41 Retry Failed - Reason: Invalid Address For Write

W 01:38:41 Retrying (3 of 20)...

W 01:38:41 Retry Failed - Reason: Invalid Address For Write

W 01:38:41 Retrying (4 of 20)...

W 01:38:41 Retry Failed - Reason: Invalid Address For Write

W 01:38:41 Retrying (5 of 20)...

W 01:38:41 Retry Failed - Reason: Invalid Address For Write

W 01:38:41 Retrying (6 of 20)...

W 01:38:41 Retry Failed - Reason: Invalid Address For Write

W 01:38:41 Retrying (7 of 20)...

Edited December 10, 2009 by PenguinBarber

[mmalves]

You're right, the obvious thread is this -> http://forum.imgburn.com/index.php?showtopic=8000

 

You could try burning at 6x or 4x if you feel like making more coasters

[PenguinBarber]

You're right, the obvious thread is this -> http://forum.imgburn.com/index.php?showtopic=8000

 

You could try burning at 6x or 4x if you feel like making more coasters

Yeah, I figured.. I thought expensive TDK's (thats what the tag said anyways) would do but.. sigh.

 

I'll make one more try at lower speed before I aknowledge defeat.

Edited December 10, 2009 by PenguinBarber

[PenguinBarber]

Burning reeeally slow worked, this media still sucks tho

 

Going Verbatim next time.

[SUPERCOOLMAN]

I used Optiarc DVD RW AD-7200S 1.0A to burn DVD+R DL made in china (Prodisc ... etc), TDK's and Verbatim at 4X for more than 3 months ago and all of these backups are still playable as of now.

 

-just another solution besides trying different brands of blank media

[spinningwheel]

just another solution besides trying different brands of blank media

 

If you play with media long enough you may get it to work after your trial and error period os over, however some media is purely crap and it becomes a matter of chance as to whether it works or not. What we recommend here is designed to eliminate one of the many things that can go wrong with the process and media is always a big iitem when problems arise. What works for you is fine, however it does not invalidate the fact that we try to steer users to the best solution to their problem.